1. Manuals
  2. Brands
  3. Huawei Manuals
  4. Webcam
  5. PowerCube 500
  6. Manual

Huawei Camera 500 Manual

Hide thumbs Also See for Camera 500:
1
2
3
4
5
6
7
8

Quick Links

1
Included Items
Camera 500
"Smart eye" cover, Securing tab
M3x10 screw assembly
1/4"-20 UNC screw
Base
M3 x 6 Phillips flat
head machine screws
This list is for reference only. The delivered components may differ in appearance. The cables and power adapter
work only with the included Camera 500. If a component is damaged, missing, or wet upon being removed from
the box, contact your local supplier.
2
Installing the Camera 500
The Camera 500 can be placed horizontally, mounted on top of a display, wall-mounted,
ceiling-mounted, or placed on a tripod. Choose the best method for your site requirements.
Do not remove the sliding blocks from the base before installation and retain the default positions.
Horizontal Placement
Place the Camera 500 on a flat tabletop and connect the cables.
If you have to place the Camera 500 on a sloping surface, the slope must be less 15° for the PTZ to function
properly.
Standard
5 m network cable
DIP switch plectrum
Optional
L-shaped bracket
Plastic expansion bolt
(tapping screws and plastic
expansion sleeve)
1
Power adapter, power cable
Quick Start
快速入门
HUAWEI Camera 500
Quick Start
Velcro tape strips
loading

Related Manuals for Huawei Camera 500

Summary of Contents for Huawei Camera 500

  • Page 1 Do not remove the sliding blocks from the base before installation and retain the default positions. Horizontal Placement Place the Camera 500 on a flat tabletop and connect the cables. If you have to place the Camera 500 on a sloping surface, the slope must be less 15° for the PTZ to function properly.
  • Page 2 Use the L-shaped bracket, base, 1/4"-20UNC screw, M3x10 screw assembly, and velcro tape strips which are delivered with the Camera 500. You need to prepare a ruler by yourself. • Fix the display position before installation. If the display needs to be moved after the installation, uninstall the camera and reinstall it after the movement is complete.

  • Page 3: Wall Mounting

    Wall-Mounting The Camera 500 can also be installed on a wall if the display is wall-mounted. Use the included plastic expansion bolts, L-shaped bracket, base, 1/4"-20 UNC screw, and M3 x 6 Phillips flat head machine screws. You will need a hammer drill, hammer, rechargeable battery-powered electric screwdriver, and Phillips screwdriver.

  • Page 4: Ceiling Mounting

    • A minimum weight load of 10.5 kg (23.15 lb) and a thickness of 2 mm (0.08 in.) to 3 mm (0.12 in.). • Comes with a location pillar, which can be inserted into the location hole of the Camera 500. The distance between the screw hole on the bracket and the location pillar must be 14.5 mm (0.57 in.),...

  • Page 5: Connecting Cables

    Box 300 Performing a Power-on Check After the cables are connected, power on the Camera 500. The power indicator turns green and the Camera 500 starts automatically. Do not manually rotate the camera PTZ or prevent it from rotating when the Camera 500 is being powered on or running.
  • Page 6 Setting the Camera 500 You can set camera parameters by using the two-state DIP switch or round DIP switch. • The following table lists the functions of the two-state DIP switch. Parameter Switch Status Function Auto-Framing is disabled. AUTO FRAME Auto-Framing is enabled.
  • Page 7 Controlling the Camera 500 You can control the PTZ and lens of the Camera 500 on the web interface of an UHD video conferencing endpoint or Touch. To control the Camera 500 from an endpoint that is connected to the Camera 500 through an HDMI port, you need to add a serial cable between them.

  • Page 8: Pin Layout

    Pin Layout COM IN (RJ45) COM OUT (RJ45) RS422_TXD- RS422_RXD- RS422_TXD+ RS422_RXD+ RS422_RXD-/RS232_RX RS422_TXD- RS422_RXD+/RS232_TX RS422_TXD+ IR-OUT Scan the QR Codes Camera 500 Installation Video...