Table of Contents
Quick Links
Packing List
Camera
HD-VI to DVI cable
Used to convert the HD-VI
port of the camera to a
standard DVI port (female
connector). Connect this cable
to an endpoint through a
double male connector DVI
cable.
Power adapter and power cable
Note: Their specifications are
different in different countries.
1/4"-20UNC-7 mm screw
Used to fix a support.
Copyright © Huawei Technologies Co., Ltd. 2018. All rights reserved.
1
Quick Start Guide
Certificate of Compliance
& Safety Precautions &
Warranty Card
Issue: 12 (2018-03-20)
http://www.huawei.com
Table of Contents
Related Manuals for Huawei VPC620
Summary of Contents for Huawei VPC620
-
Page 1: Packing List
Warranty Card port of the camera to a standard DVI port (female connector). Connect this cable to an endpoint through a double male connector DVI cable. Issue: 12 (2018-03-20) http://www.huawei.com Copyright © Huawei Technologies Co., Ltd. 2018. All rights reserved. - Page 2 Appearance Port Description VPC620 Specification 1: 12x optical zoom and 12x digital zoom Lens Specification 2: 4x optical zoom and 2.5x digital zoom VPC600 12x optical zoom and 12x digital zoom MODE button Moves to the next option of a parameter.
-
Page 3: Installation
If the display is thicker than 170 mm or the display is wall-mounted, the VPC620 or VPC600 can be installed in any possible way other than be mounted on top of the display. If the display is 170 mm or thinner, the VPC620 or VPC600 can be mounted on top of a display or placed horizontally. -
Page 5: Wall-Mounted
Use the L-shaped bracket to secure the VPC620 or VPC600 on a wall. Wall-Mounted Drill four holes in the wall for mounting the bracket, each with a diameter of 8 mm (0.31 in.) and depth of 35–40 mm (1.38–1.57 in.). -
Page 6: Ceiling-Mounted
1/4"-20UNC screw delivered with the purchased bracket rather than a 1/4"-20UNC screw delivered with the VPC620 or VPC600 because the length of the latter may be too long or too short to hold up the purchased bracket. -
Page 7: Controlling The Camera
Checking the Status Indicator Indicator Status Camera Status Steady green The camera is working properly. Steady red The camera is in sleep mode. Blinking green The camera is upgrading. Blinking red The camera is faulty. Controlling the Camera You can control the camera from the connected HD videoconferencing endpoint or remote control. - Page 8 Parameter Mode Description the signals to the endpoint. The video is displayed in standard mode. If you select this option and set VEDIO to 720p 60, 1080p 30, 1080i 60, and 1080p 60, the actual video format are 720p 59.94 STANDARD fps, 1080p 29.97 fps, 1080i 59.94 fps, and 1080p 59.94 fps, respectively.
-
Page 9: Specifications
Item Specifications Imaging component 2.38-megapixel and 1/2.8'' CMOS imaging chip CMOS = complementary metal-oxide-semiconductor Optical zoom VPC620: 12x/4x VPC600: 12x Focal length and aperture Lens VPC620-12X-00/VPC600-12X-00 Focal length: 3.9 mm to 47.1 mm Aperture: F1.8 to F22 VPC620-4X-02 Focal length: 3.9 mm to 15.7 mm Aperture: F1.8 to F22... -
Page 10: Safety Precautions
Category Item Specifications Infrared signal reception Comply with the following standards: Infrared remote Control distance: 6 m control Vertical angle: ±15° Horizontal angle: ±30° Input voltage 100–240 V AC, 50 Hz or 60 Hz Power and Output voltage 12 V DC power supply Power <... - Page 11 Dimensions...
-
Page 12: Pin Assignment
Pin Assignment Pin (VISCA IN) Pin (VISCA OUT) IR OUT... - Page 13 FAQs Question Why can't I rotate the camera from an HD videoconferencing endpoint? Answer 1. The serial connection between the camera and the HD videoconferencing endpoint is incorrect. 2. The serial port of the HD videoconferencing endpoint or the camera type is set incorrectly.
- Page 14 Why cannot the cameras be controlled after they are connected? Answer 1. The Huawei VPC620 and VPC600 cameras support the Video System Control Architecture (VISCA) protocol and thereby can be cascaded. 2. Connection method: Use a keyboard that supports the VISCA protocol to connect the cameras.