Table of Contents
15.2 Device maintenance
start
Requirements
sThe appliance is prepared for
the device maintenance.
→ "Preparing the device for device
maintenance",
Page 34 .
sThe condensed water container is for
device maintenance. .
Set the program to level 1.
1.
onIron drypress and hold.
2.
Set the program to level 4.
3.
4. Iron dryletting go.
aThe display shows alternately
"CP1" and the program duration.
15.3 Simple device maintenance
on the device
perform rate
To remove possible light
contamination, a simple device
maintenance can be performed.
Remark:After a b period
of use recommends
tomatic the simplicity
maintenance. the display
starting and after
certain
the device
dire device
y shows before
program end
the the tip "CrE"
Pine tree. The message is displayed
several times until the simple device
maintenance has been completed.
Requirements
sThe appliance is prepared for
the device maintenance.
→ "Preparing the device for device
maintenance",
Page 34 .
sDevice maintenance has started.
→ "Start device maintenance",
page 35
Approx. Fill 1 ½ liters of warm tap
1.
water into the condensate container.
Hold the filled condensed water
container horizontally so that no
liquid escapes.
Push in the condensed water
2.
container until it locks into place.
PressStart/ Refill .
3.
Device maintenanceNL
for 5 seconds
35
Table of Contents
