Refer to the Digital User's Guide for more information. Index 1 Safety..........4 9 Programs ........ 24 1.1 General instructions ....4 9.1 Automatic programs ..24 1.2 Destination of the device 9.2 Time programs........ 25 rate ........4 10 Accessories........ 27 1.3 Restriction of users ..
Page 3
15.4 Intensive device maintenance on the device preparing ........ 36 15.5 Carrying out intensive device maintenance ....... 37 15.6 Ending intensive device maintenance ....38 16 Cleaning and maintenance ..39 16.1 Tips for cleaning and the maintenance....39 16.2 Humidity sensor ....40 16.3 Filter of the condensed water tank ......
NLSafety 1 Safety Observe the following safety instructions. 1.1 General instructions sRead this manual carefully. sKeep the operating instructions and product information for future reference. for use or for subsequent owners. sDo not connect the device in case of transport damage. 1.2 Destination of the device Only use the device: sto use dryer-safe and water-washed textiles...
SafetyNL 1.4 Secure installation WARNING ‒ Risk of electric shock! Improper installations are dangerous. ▶ Only connect and use the device in accordance with the information on the type plate. ▶ Only connect the device to a mains supply with alternating current via a properly installed earthing socket.
Page 6
NLSafety ▶ Use only manufacturer-approved adapters and power cords. ▶ If the power cord is too short and a longer power cord is not available, contact an electrical retailer to adjust the home installation. WARNING ‒ Risk of injury! The heavy weight of the device can cause injuries when lifted. ▶...
SafetyNL There is a tripping hazard with incorrectly laid hoses and mains connection cables. ▶ Lay the hoses and connection cables in such a way that they cannot be tripped over. If the appliance is moved by protruding parts, such as the loading door, the parts can break off.
Page 8
NLSafety WARNING ‒ Risk of health hazard! Children can lock themselves in the appliance and endanger their lives. ▶ Do not install the appliance behind a door that blocks or prevents the opening of the appliance door. ▶ In the case of discarded appliances, remove the plug of the mains cable from the socket, then cut the mains cable and damage the lock of the appliance door so that the appliance door no longer closes.
Page 9
SafetyNL WARNING ‒ Risk of fire! The refrigerant R290 in this appliance is environmentally friendly but flammable and can ignite on contact with open flames or ignition sources. ▶ Open flames and other ignition sources away from the hold device. WARNING ‒...
NLSafety The appliance may tip over when sitting or leaning on the open door. ▶ Do not sit or lean on the appliance door. ▶ Do not place any objects on the appliance door. Reaching into the rotating drum can cause injury to hands. ▶...
Avoid material damageNL ▶ Do not use hard scouring or 2 Material damage dishwashing sponges. avoid Clean the device only with water ▶ and a soft, damp cloth. ▶ Remove all detergent residues, spray PAY ATTENTION! Incorrect dosage of fabric softeners, mist residues or residues immediately detergents, care products and upon contact with the appliance.
NLSet up and connect → "Disposal of the packaging", Observe the maximum load for the Page 11 programmes. → "Programs", Page 24 Check the device for visible damage. aExceeding the maximum Open the appliance door. male load quantity extends the →...
Set up and connect 4.3 Installation site installation site To demand requirements This device al- borrow a washing machine from the- PAY ATTENTION! If the device is tilted more than 40°, same manufacturer residual water can run out of the place.
Page 14
NLSet up and connect The connection data of the device can be found in the technical data → Page 49 . Check the mains plug for tightness.
Getting to know your deviceNL 5 Getting to know your device 5.1 Device Here you will find an overview of the components of your device. Depending on the device type, details in the picture may differ, e.g. the color and the shape. Vent Condensate tank →...
NLGetting to know your device 5.2 Control panel You can set all functions of your device and obtain information about the operating status via the control panel. Programs → Page 24 Program selector → Page 28 Display → Page 17 Buttons →...
DisplayNL 6 Display The display shows the current setting values, options or information texts. Example display indication name Description Indication 0:40 Expected program duration or remaining Program duration / remaining time of time of the program in hours and minutes. the program 1:25 Time program...
Page 18
NLDisplay name Description Indication The drying target is activated. (Closet- Drying purpose cabinet- → "Buttons", Page 21 dry) The drying target is activated. (cupboard dry Drying purpose cabinet- → "Buttons", Page 20 plus) dry Plus Drying target The custom drying target is activated. →...
Page 19
DisplayNL name Description Indication Program status Drying purpose iron Program status Drying purpose cabinet- Program status Anti wrinkle Pause Program status (Start/ Additional to fill) Program end Program status Example...
NLButtons 7 Buttons Here you will find an overview of the buttons and their setting options. Knob Description Choice Start/ Refill sstart Start program, an- zero or pause. sCancel spause 3 sec. sactivate Activate or deactivate the child lock. sdeactivate The control panels secure against accidental operation.
Page 21
ButtonsNL Knob Description Choice sCupboard Dry sWith the selection Cabinet- Cupboard Dry dry, the drying target is activated. Laying the drying target determine how damp or dry the laundry is at the end of the programme → "drying target", Page 23 sWith the selection +1 , + 2 or +3 the drying target is adjusted.
Page 22
NLButtons Knob Description Choice sactivate Activate soft drying Gentle drying or deactivate. sdeactivate The temperature becomes lowered for sensitive textiles, e.g. for polyacrylic or elastane. The program duration is extended. sProgram end sThe program end Ready in sProgram duration to establish. The program duration is already included in the set number of...
Drying targetNL 8 Drying target A drying target is specified for each automatic programme. The drying target determines how dry or damp your laundry is after the program has ended. laundry Drying result Drying target The laundry is dry. Multi-layer thick laundry Cupboard Dry plus that dries hard.
NLPrograms 9 Programs You can dry your textiles with either an automatic program or a timed programme. 9.1 Automatic programs Tips Automatic programs in which moisture sensors measure the sChoose the drying target according to residual moisture of the laundry adjust the textile or the desired during drying.
ProgramsNL Program Description Max. bela- thing (kg) sTo distribute the filling and retain moisture To remove buildup, shake the textiles at the end of the programme. Hygiene Plus Dry sturdy and boil-resistant textiles made of cotton and linen. Dry robust and boil- resistant textiles made of cotton and linen.
Page 26
NLPrograms Program Description Max. bela- thing (kg) Remove the laundry at the end of the program and let it dry. Time program warm Dry all textiles except wool and silk. Suitable for pre-dried or slightly damp laundry and for post-drying multi-layered, thicker laundry.
accessoriesNL 10 Accessories Use only original accessories. These are adapted to the device. Remark:Some accessories are available in other colours. Contact the → "Customer Service", page 47 . Usage Order number Device space saving WTZ27410 Connection set run on a suitable washing machine of the same the manufacturer and with the same width and...
NLlaundry 1 2 The Operation in es- 11 Laundry sentie 11.1 Preparing the laundry 12.1 Switch on device PAY ATTENTION! Objects left in the laundry can Required:The device is correctly set damage the laundry and the drum. up and connected. →...
ServiceNL Remove the laundry from the 12.4 Starting the program drum. 12.8 Switching off the device Required:A program is set. → "Set program", page 28 ▶ Turn the program selector onOutto make. onStart/ Refillto press. ▶ 12.9 Fluff filter aThe display shows the program duration function ready in time.
Page 30
NLService Remove the two-piece fluff filter. Open both fluff filters. Remove the fluff. Remove the fluff from the recess. Thoroughly clean both fluff filters with running warm water and dry Make sure that no fluff falls into them. the air duct. Detach the two-piece fluff filter.
ServiceNL Close and connect the two fluff Requirements filters. sThe display shows after drying: "end" sor the display shows during usage: . Pull out the condensed water container horizontally. Install the two-piece fluff filter. Empty the condensed water container. Close the door. 12.10 Condensate tank During drying, condensation is Regularly check the filter of the...
NLChild lock Push in the condensation container Push in the condensed water ▶ container as far as it will go. 13 Child Lock Secure your device against unwanted operation via the controls. 13.1 Activate child lock Both keys 3 sec. ▶...
Basic settingsNL 14 Basic Settings You can configure the basic settings of your device according to your needs. 14.1 Overview of the basic settings Program- Description Basic setting Where the ling position Signal 0 (off) Adjust the volume of the signal 1 (soft) after the program has ended.
NLDevice maintenance Remove the laundry. 14.2 Changing basic settings Set the program selector to position 1. Close the appliance door. Pull out the condensed water container horizontally. PressIron dryand at the same time turn the program selector to position 2. aThe display shows the current value the on.
Device maintenanceNL for 5 seconds 15.2 Device maintenance the the tip "CrE" Pine tree. The message is displayed start several times until the simple device maintenance has been completed. Requirements sThe appliance is prepared for the device maintenance. → "Preparing the device for device Requirements sThe appliance is prepared for maintenance",...
NLDevice maintenance Push in the condensed water aThe device maintenance starts and there a signal sounds. aThe display container until it locks into place. shows "End" on the end of device maintenance and a signal sounds. Pull out the condensed water container horizontally.
Device maintenanceNL A bottle of the original Requirements sThe appliance is prepared for maintenance product → the device maintenance. "Accessories", Page 27 and fill → "Preparing the device for device approx. 1 ½ liters of warm tap water maintenance", into the condensate container. Page 34 .
NLDevice maintenance Pull out the condensed water Carefully tilt the condensed water container horizontally and empty container horizontally and empty it to remove the remnants of the original care product. Approx. Fill 1 ½ liters of warm tap water into the condensate container. 15.6 Ending intensive device maintenance Approx.
Emptying the condensed water container → Page 31 . information in the digital operating instructions by scanning the QR code in the table of contents or on www.bosch-home.com. 16.1 Cleaning and maintenance tips This keeps The housing and the operating...
NLCleaning and maintenance Clean the humidity sensor with a with water and a sponge. damp cloth to take. Recent deposit Delete immediately all detergent gene can make residues, spray lighter and sun- of the remains skin remnants or den removed. remaining residual aunts.
Page 41
Cleaning and maintenanceNL Remove the filter. Push in the filter as far as it will Clean the filter with running warm water or in the dishwasher. Push in the condensed water container. → "Push in the condensate container", page 32...
NLTroubleshooting 17 Troubleshooting You can remedy minor faults on the device yourself. Before contacting customer service, please refer to the troubleshooting information. This way you avoid unnecessary costs. WARNING Risk of electric shock! Improper repairs are dangerous. Only trained specialist personnel may carry out repairs on the device. ▶...
Page 43
TroubleshootingNL Cause and Troubleshooting Malfunction device pauses, Cooling process active. but the drum No error - no action required. ▶ running. wrinkling. The load quantity is too high. Pay attention to the maximum load of the ▶ → "Programs", Page 24 . The laundry is left in the drum for too long after drying.
Page 44
NLTroubleshooting Cause and Troubleshooting Malfunction Condensate pump active. Pump sound. No error - normal operating noise. ▶ Buzzing sound. Compressor venting active. No error - normal operating noise. ▶ Fluff filter is dirty. Drying time is too long. → "Cleaning the fluff filter", Page 29 ▶...
Page 45
TroubleshootingNL Cause and Troubleshooting Malfunction Laundry is too damp. Remove the laundry from the drum immediately after drying. Spread out the items to let them cool. Inappropriate drying target set. → "Change drying target", page 23 . ▶ Drying target not adjusted. →...
NLTransport, storage and disposal 18.2 Disposal of your old 18 Transport, on- device hit and drain Environmentally friendly disposal allows valuable raw materials to be 18.1 Preparing the device for reused. transport WARNING Risk of health hazard! PAY ATTENTION! If the device is used immediately after transport, the refrigerant in the Children can lock themselves in the device may cause damage to the...
customer serviceNL 19.1 Product number (E no.) This appliance is marked in accordance with and production number ming with the European (FD) Directive 2012/19/EU on waste The product number (E-Nr.) and the electrical and electronic production number (FD) can be found equipment (waste on the type plate of the device.
NLConsumption values 20 Consumption values The program Cotton eco Depending on the type of textiles, the (indicated by "arrow") is suitable for composition of the laundry to be drying cotton laundry with normal dried, residual moisture in the textiles, humidity and from the point of view of the degree of dryness set, load the combined energy consumption for quantity, environmental conditions...
Page 52
Contact data of all countries are listed in the attached service directory. BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 Munich, GERMANY www.bosch-home.com A Bosch Company * 9001699328* 9001699328(020912)