Quick Links
Product End-of-Life Disassembly Instructions
:
Storage
Product Category
Marketing Name / Model
[List multiple models if applicable.]
HPE Cray CS E1000 4TB SAS 5U84 42pk HDD Bdl
HPE Cray CS E1000 6TB SAS 5U84 42pk HDD Bdl
HPE Cray CS E1000 8TB SAS 5U84 42pk HDD Bdl
HPE Cray CS E1000 4TB 5U84 SED 42pk HDD Bdl
HPE Cray CS E1000 10TB 5U84 SED 42pk HDD Bdl
HPE Cray CS E1000 16TB 5U84 SED 42pk HDD Bdl
HPE Cray CS E1000 SAS 5U84 LFF Drv Encl
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic
instructions for the disassembly of HPE products to remove components and materials requiring selective treatment,
as defined by Directive 2012/19/EU of the European Parliament and of the Council on Waste Electrical and Electronic
Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface
greater than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
MF877-00
Template Revision C, 30-July-2018
Copyright 2018 Hewlett Packard Enterprise Development LP
HPE instructions for this template are available at
Notes
With a surface greater than 10 sq cm
5 in each chassis.
1 in each of 2 power supplies.
1 in each of 5 DC fan modules.
1 in each of 2 I/O modules (IOMs).
All types including standard alkaline and lithium
coin or button style batteries
For example, mercury in lamps, display
backlights, scanner lamps, switches, batteries
Includes background illuminated displays with
gas discharge lamps
5 capacitors in each of 2 power supplies.
1 power cord for each of 2 power supplies.
MF877-01
Quantity
of items
included
in
product
14 Max
0
0
0
0
0
10
2
Page 1
Related Manuals for HP Cray CS E1000
Summary of Contents for HP Cray CS E1000
- Page 1 Product Category Marketing Name / Model [List multiple models if applicable.] HPE Cray CS E1000 4TB SAS 5U84 42pk HDD Bdl HPE Cray CS E1000 6TB SAS 5U84 42pk HDD Bdl HPE Cray CS E1000 8TB SAS 5U84 42pk HDD Bdl...
- Page 2 Quantity of items Item Description Notes included product 3 SAS expansion cables for each of 2 IOMs. 1 RJ45 cables for each of 2 IOMs. Gas Discharge Lamps Plastics containing Brominated Flame Retardants weighing > 25 grams (not including PCBs or PCAs already listed as a separate item above) Components and parts containing toner and ink, Include the cartridges, print heads, tubes, vent...
- Page 3 3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items contained in the product that require selective treatment (with descriptions and arrows identifying locations) 3.2.1 PSU Disassembly procedure 1. Remove the casing screws using a Phillips #1 bit and pull the top cover off. MF877-00 Page 3 Template Revision C, 30-July-2018...
- Page 4 MF877-00 Page 4 Template Revision C, 30-July-2018 Copyright 2018 Hewlett Packard Enterprise Development LP HPE instructions for this template are available at MF877-01...
- Page 5 2. Remove the cable connection connecting the board—present on a PSU side—marked in the image below. 3. Remove the five screws connecting the PCBA to metal enclosure using Phillips #1 bit screwdriver, and then separate the casing. 4. Pull the lugs in the direction shown in the image below. MF877-00 Page 5 Template Revision C, 30-July-2018...
- Page 6 MF877-00 Page 6 Template Revision C, 30-July-2018 Copyright 2018 Hewlett Packard Enterprise Development LP HPE instructions for this template are available at MF877-01...
- Page 7 5. After removing all the connections, remove the PCA from the enclosure. 3.2.2 IOM Disassembly procedure 1. Remove the two screws from the lid. MF877-00 Page 7 Template Revision C, 30-July-2018 Copyright 2018 Hewlett Packard Enterprise Development LP HPE instructions for this template are available at MF877-01...
- Page 8 2. Remove the top cover by sliding the metal enclosure in the direction shown. MF877-00 Page 8 Template Revision C, 30-July-2018 Copyright 2018 Hewlett Packard Enterprise Development LP HPE instructions for this template are available at MF877-01...
- Page 9 4. Remove the six screws marked in the image. MF877-00 Page 9 Template Revision C, 30-July-2018 Copyright 2018 Hewlett Packard Enterprise Development LP HPE instructions for this template are available at MF877-01...
- Page 10 5. Pull the PCA in the direction shown by the red arrow to remove the PCA from the metal case. MF877-00 Page 10 Template Revision C, 30-July-2018 Copyright 2018 Hewlett Packard Enterprise Development LP HPE instructions for this template are available at MF877-01...
- Page 11 6. Remove the heatsinks by removing the pushpins. To remove a pushpin, compress it from the top and use pliers to pull out the other end. MF877-00 Page 11 Template Revision C, 30-July-2018 Copyright 2018 Hewlett Packard Enterprise Development LP HPE instructions for this template are available at MF877-01...
- Page 12 3.2.3 Fan module Disassembly procedure 1. Remove the four screws in the front of the fan support cover with a Phillips #1 bit. 2. Pull the support cover backward and lift it off the fan tray base. MF877-00 Page 12 Template Revision C, 30-July-2018 Copyright 2018 Hewlett Packard Enterprise Development LP HPE instructions for this template are available at...
- Page 13 3. Remove the fan tray cover by separating the one end of the cover from the pins and sliding the cover toward the front of the fan assembly. 4. Remove the fan connector as circled in the figure. MF877-00 Page 13 Template Revision C, 30-July-2018 Copyright 2018 Hewlett Packard Enterprise Development LP HPE instructions for this template are available at...
- Page 14 5. Remove the screws in the marked locations using 2mm hex bit. 6. Remove the plastic light pipe over the LEDs on the PCBA as shown in the image below. MF877-00 Page 14 Template Revision C, 30-July-2018 Copyright 2018 Hewlett Packard Enterprise Development LP HPE instructions for this template are available at MF877-01...
- Page 15 7. After removing the connector and plastic LED pipe, remove the DC fan from the metal case. MF877-00 Page 15 Template Revision C, 30-July-2018 Copyright 2018 Hewlett Packard Enterprise Development LP HPE instructions for this template are available at MF877-01...
- Page 16 3.2.4 Chassis Disassembly Procedure Rear assembly and midplane removal 1. Remove the screws marked below with a Phillips #1 bit. MF877-00 Page 16 Template Revision C, 30-July-2018 Copyright 2018 Hewlett Packard Enterprise Development LP HPE instructions for this template are available at MF877-01...
- Page 17 2. Remove the ops cable from the PCBA connector. MF877-00 Page 17 Template Revision C, 30-July-2018 Copyright 2018 Hewlett Packard Enterprise Development LP HPE instructions for this template are available at MF877-01...
- Page 18 3. Remove the screw marked in the image below on both sides of chassis using a Phillips #2 bit. 4. Remove the screws in the marked location using a T10 bit. MF877-00 Page 18 Template Revision C, 30-July-2018 Copyright 2018 Hewlett Packard Enterprise Development LP HPE instructions for this template are available at MF877-01...
- Page 19 5. Holding the metal frame, pull out the inner chassis as shown below. 6. Remove the ops cable from the midplane. MF877-00 Page 19 Template Revision C, 30-July-2018 Copyright 2018 Hewlett Packard Enterprise Development LP HPE instructions for this template are available at MF877-01...
- Page 20 7. Remove the ops cable arm using a 2mm hex bit. 8. Remove the metal cable cover screws using a T10 bit and slide it down to detach it from the chassis. MF877-00 Page 20 Template Revision C, 30-July-2018 Copyright 2018 Hewlett Packard Enterprise Development LP HPE instructions for this template are available at MF877-01...
- Page 21 9. Remove the power cables and SAS communication cables from their respective connectors as marked in the marked in the image below. MF877-00 Page 21 Template Revision C, 30-July-2018 Copyright 2018 Hewlett Packard Enterprise Development LP HPE instructions for this template are available at MF877-01...
- Page 22 10. Remove the top Igus cable ground to the rear chassis assembly using a 10mm socket bit. Then remove the lock washer and the flat washer from the position marked in the image below. 11. Unfold all the cables (power, SAS, and ground) underneath the metal Z-height restrictor. MF877-00 Page 22 Template Revision C, 30-July-2018...
- Page 23 MF877-00 Page 23 Template Revision C, 30-July-2018 Copyright 2018 Hewlett Packard Enterprise Development LP HPE instructions for this template are available at MF877-01...
- Page 24 12. Gently place the chassis on its side so that bottom side of the chassis is accessible. Remove the bottom connection. 13. Remove the metal cable cover and place it over the cable bundle bottom side of the chassis with a T10 bit and unslide the green tab.
- Page 25 14. Remove the power cable connector marked in the image below. 15. Remove the top Igus cable ground to the rear chassis assembly using a 10mm socket bit. Then remove the lock washer and flat washer from the position marked in the image below. MF877-00 Page 25 Template Revision C, 30-July-2018...
- Page 26 MF877-00 Page 26 Template Revision C, 30-July-2018 Copyright 2018 Hewlett Packard Enterprise Development LP HPE instructions for this template are available at MF877-01...
- Page 27 16. Unfold all the cables (power, SAS, and ground) underneath the metal Z-height restrictor. 17. Pull the white tabs on both sides of the chassis and pull out the rear assembly chassis as shown below. MF877-00 Page 27 Template Revision C, 30-July-2018 Copyright 2018 Hewlett Packard Enterprise Development LP HPE instructions for this template are available at MF877-01...
- Page 28 MF877-00 Page 28 Template Revision C, 30-July-2018 Copyright 2018 Hewlett Packard Enterprise Development LP HPE instructions for this template are available at MF877-01...
- Page 29 18. Use a T10 bit to remove the screws marked below. 19. Remove the screw from the midplane bracket on the top of the rear assembly. MF877-00 Page 29 Template Revision C, 30-July-2018 Copyright 2018 Hewlett Packard Enterprise Development LP HPE instructions for this template are available at MF877-01...
- Page 30 20. Remove the midplane PCB from the rear assembly as shown below. 21. Cut the zip ties around the communication cables and clip the excess. MF877-00 Page 30 Template Revision C, 30-July-2018 Copyright 2018 Hewlett Packard Enterprise Development LP HPE instructions for this template are available at MF877-01...
- Page 31 MF877-00 Page 31 Template Revision C, 30-July-2018 Copyright 2018 Hewlett Packard Enterprise Development LP HPE instructions for this template are available at MF877-01...
- Page 32 22. Remove the bottom drawer Igus communication cables from the board as shown below. Top and bottom drawer removal 1. Press the latches on both sides of the top drawer as shown by red arrows and pull out the drawer from the chassis as indicated by the green arrow.
- Page 33 2. Press the blue button and pull out the drawer until all drive rows are shown. 3. Pull the drawer until a gap is visible after all three drive bays. MF877-00 Page 33 Template Revision C, 30-July-2018 Copyright 2018 Hewlett Packard Enterprise Development LP HPE instructions for this template are available at MF877-01...
- Page 34 4. Hold the frame as marked by the red arrows and pull out the drawer all the way until the last drive bay is separated from the front of the top cover. Carefully pull the cable from the chassis and un-route the cables from the chassis.
- Page 35 5. Use a T25 bit to remove the indicated screws on both sides to detach the metal plate that covers the side plane. 6. Remove the indicated connectors and black cable from the plastic routing guide on both sides. MF877-00 Page 35 Template Revision C, 30-July-2018 Copyright 2018 Hewlett Packard Enterprise Development LP...
- Page 36 MF877-00 Page 36 Template Revision C, 30-July-2018 Copyright 2018 Hewlett Packard Enterprise Development LP HPE instructions for this template are available at MF877-01...
- Page 37 7. Remove the blue cable connectors on both sides as marked in the images below. MF877-00 Page 37 Template Revision C, 30-July-2018 Copyright 2018 Hewlett Packard Enterprise Development LP HPE instructions for this template are available at MF877-01...
- Page 38 8. Remove the plastic cable guide marked in the image below. 9. Use a 10mm socket to remove the nut and washer from the red circled points. Then unlock the Igus cable as shown by the red arrow. MF877-00 Page 38 Template Revision C, 30-July-2018 Copyright 2018 Hewlett Packard Enterprise Development LP HPE instructions for this template are available at...
- Page 39 MF877-00 Page 39 Template Revision C, 30-July-2018 Copyright 2018 Hewlett Packard Enterprise Development LP HPE instructions for this template are available at MF877-01...
- Page 40 10. Use a T25 bit to remove the side plane PCB screws and remove the PCB from the base plane connector as shown by the red arrow below. 11. Use a T10 bit to remove the screws marked with red circles below to remove the base plane metal plate from the bottom of the drawer.
- Page 41 MF877-00 Page 41 Template Revision C, 30-July-2018 Copyright 2018 Hewlett Packard Enterprise Development LP HPE instructions for this template are available at MF877-01...
- Page 42 12. Pull up the base plane PCB from the drawer as shown below. 13. Repeat the previous 12 steps to remove and disassemble the bottom drawer. MF877-00 Page 42 Template Revision C, 30-July-2018 Copyright 2018 Hewlett Packard Enterprise Development LP HPE instructions for this template are available at MF877-01...