Page 1
PRODUCT USER GUIDE MicroLED 100P Illuminator Rev: C2 PLEASE READ THIS USER GUIDE BEFORE INSTALLING OPERATING OR PERFORMING MAINTENANCE ON THE ILLUMINATOR UNIT E357731...
Page 2
INTRODUCTION Thank you for purchasing this UFO illuminator. To ensure that the illuminator is set up optimally and gives a long service life, please read this user guide before installing, operating or performing any maintenance on the unit. Please keep this user guide for future reference.
This luminaire is powered by a 12V Power Supply Unit or 12V Constant Voltage Driver. Remove the PSU/driver from its box. Plug the jack plug into the socket in the back, and the illuminator is now ready for connection. UFO LIGHTING...
INSTALLATION & OPERATION CONNECTION There are 2 connections required - the fiber port and the mains supply. The fiber port should be connected first. Connect and secure the fiber optic connector into the front of the unit and secure using the M5 locking screw. Plug the mains plug into the electrical supply socket.
TROUBLESHOOTING Problem Possible Cause(s) Remedy Unit is dead LED Mains supply off Check supply and reinstate power Loose mains plugs Check plugs indicator is not PSU failed Replace PSU illuminated Unit is dead no light output but LED power LED array failure Replace Light Source...