1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Conference System
  5. 3200 Series
  6. Use and care manual

Cisco 3200 Use And Care Manual

Cisco systems telepresence system installation guide
Hide thumbs Also See for 3200:
Table of Contents

Quick Links

Enlarged version
Cisco TelePresence System 3200
Assembly Guide
Use & Care Guide
Field-Replaceable Unit Guide
July 28, 2008
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Text Part Number: OL-14521-01
Table of Contents
loading

Related Manuals for Cisco 3200

Summary of Contents for Cisco 3200

  • Page 1 Cisco TelePresence System 3200 Assembly Guide Use & Care Guide Field-Replaceable Unit Guide July 28, 2008 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 Text Part Number: OL-14521-01...
  • Page 2 Any use of actual IP addresses in illustrative content is unintentional and coincidental. Cisco TelePresence System 3200 Assembly Guide Use & Care Guide Field-Replaceable Unit Guide © 2008 Cisco Systems, Inc. All rights reserved.

  • Page 3: Table Of Contents

    Building the Second Row Table Assembly C H A P T E R Table Numbering Information Used in This Chapter Parts List Assembling the Remaining Cisco TelePresence Elements C H A P T E R Parts List OL-14521-01 i-ix i-ix Cisco TelePresence System 3200 Contents...
  • Page 4 Cleaning the Camera lens Maintaining the Projector Field-Replaceable Unit Guide C H A P T E R Complete List of Spares for the Cisco TelePresence System 3200 Powering On the System Replacing the Camera Cluster—Part Number CTS3K-CAM-CLST-G2= Required Information, Tools, and Equipment Removing and Replacing the Camera Cluster Replacing a Plasma Display—Part Number CTS-DISP-65-GEN4=...
  • Page 5 Carton 1 of 58: Mechanical Accessory Kit, CTS3K-ACC-KIT, 53-2855-xx OL-14521-01 12-8 12-15 12-16 12-16 12-18 12-19 12-22 12-22 12-28 12-30 12-32 12-9 12-14 12-14 12-16 12-18 12-18 12-19 12-20 12-22 12-22 12-23 12-24 12-25 12-27 12-27 12-28 12-29 12-30 12-31 12-32 12-33 Cisco TelePresence System 3200 Contents...
  • Page 6 Carton 18 of 58: Display Structure Rear Feet, 69-1625-xx, CTS3K-STRUCTURE Carton 19 of 58: Accessory Cabinet Brackets, 69-1630-xx, CTS3K-STRUCTURE Carton 20 of 58: Accessory Kit for CTS-3200, 53-3108-xx, CTS32-ACC-KIT Carton 22 of 58: Auxiliary Control Unit, CTS-LIGHT-CTRL Carton 23 of 58: Plasma Display, 74-4881-xx, CTS-DISP-65-GEN2...
  • Page 7 Carton 48 of 44: Accessory Cabinet, Right, 69-1837-xx, CTS3K-FUR-MAPLE Carton 49 of 58: Lighting Assembly, 69-1612-xx, CTS3K-LIGHT-STR Carton 50 of 58: Cisco TelePresence 3200 Structure—Addition to Standard CTS-3000, CTS32-STRUCTURE, 69-1854-01 Carton 51 of 58: Display Shelf Supports and Codec Tray, 69-1626-xx, CTS3K-STRUCTURE...
  • Page 8 Contents Cisco TelePresence System 3200 Pallet Dimensions and Description C H A P T E R Cisco TelePresence System 3200 viii OL-14521-01...

  • Page 9: Preface

    Revised: July 28, 2008, OL-14521-01 Introduction The Cisco TelePresence 3200 Assembly Guide outlines the steps and best practices for assembling and installing the Cisco TelePresence 3200. This guide is intended primarily for installers of the Cisco TelePresence System 3200. Site planners, network administrators, and facility maintenance personnel may also find this document useful.

  • Page 10: Related Documentation

    Cisco TelePresence System Release 1.4 Meeting Quick Reference, 78-17792-02 • Cisco TelePresence Manager Release 1.3 Administration and Installation Guide, OL-13673-02 • Cisco TelePresence Manager Release Notes, OL-11298-01 • All of these documents are available at the Cisco documentation website. Cisco TelePresence System 3200 Preface OL-14521-01...

  • Page 11: Chapter 1 Overview

    Provides chapter organization and content of this document and an overview of the steps you • perform to install a CTS 3200 system. Chapter 2, “Building the Display Assembly” The steps for assembling the three Display structures, connecting them, and positioning them in the •...

  • Page 12: Appendix A: Parts List Sorted By Carton

    Chapter 11, “Use & Care Guide” • This chapter provides information on maintaining several elements of the Cisco TelePresence System 3200, including the tabletop and plasma displays. Chapter 12, “Field-Replaceable Unit Guide” • This chapter describes removal and replacement processes for various elements of the Cisco TelePresence System 3200.

  • Page 13: Conventions And Terminology

    Three dots on a red background indicate a right element. Figure 1-2 Tools and Equipment List To assemble the Cisco TelePresence System 3200, you need the following tools and equipment: Uncrating and Unpacking: Claw hammer or small pry bar •...
  • Page 14 Safety glasses* • Box cutters* • Cisco TelePresence System 3200 Structure, Accessory, and Adjustment Assembly: Power screwdriver with 3, 4, 5, and 6 mm (standard or round) Allen bits, or standard 3, 4, 5, and • 6 mm Allen wrenches A round-head Allen bit can work at an angle instead of just straight out, a helpful feature in tight spots.

  • Page 15: Parts List

    If you are installing a presentation codec, use the double-wide codec tray part no. 700-25301-01 Kit # 69-1626-xx for the center display assembly. 700-23346-xx For center display structure only Kit # 69-1627-xx 700-23361-xx Kit # 69-1623-xx 48-2274-01 49-1165-01 48-2273-01 Cisco TelePresence System 3200...
  • Page 16 Attach the Leveling feet to the Rear and Front Foot stabilizers. Step 1 Figure 2-1 Figure 2-8 shows the correct positioning of the display structure; keep this in mind as you build the Note structure. Cisco TelePresence System 3200 Leveling feet Chapter 2 Building the Display Assembly OL-14521-01...

  • Page 17: Chapter 2 Building The Display Assembly

    If you ordered a Presentation Codec, attach the larger tray that comes with the Presentation Codec Note package, part no. 700-25301-01, in the center display. To install the presentation codec, refer to the “Options for the Cisco TelePresence System 3200” chapter of the Cisco TelePresence Hardware Options...
  • Page 18 Chapter 2 Building the Display Assembly Parts List Step 3 Attach the Rear and Front Foot stabilizers to the Display structures. Figure 2-2 Rear and Front Foot stabilizers 12 11 Cisco TelePresence System 3200 OL-14521-01...
  • Page 19 Chapter 2 Building the Display Assembly Parts List Step 4 Attach the left and right Display Shelf supports to each Display structure. Figure 2-3 Left and Right Display Shelf supports Cisco TelePresence System 3200 OL-14521-01...

  • Page 20: Chapter 3 Mounting And Leveling The Plasma Displays

    Attach the Display Tilt brackets to each Display structure. Figure 2-4 Display Tilt brackets Do not tighten the Display Tilt brackets. You will need to adjust them to level the Plasma displays in Note Chapter 3, “Mounting and Leveling the Plasma Displays.” Cisco TelePresence System 3200 OL-14521-01...
  • Page 21 Attach the Camera Assembly bracket to the center Display structure, making sure that this structure uses the larger codec tray. Figure 2-5 Camera Assembly bracket Note The Camera Assembly bracket attaches to the center Display structure. Cisco TelePresence System 3200 OL-14521-01...
  • Page 22 Chapter 2 Building the Display Assembly Parts List Step 7 Attach the upper and lower Support crossbars to the left and right Display structures. Figure 2-6 Upper and Lower Support crossbars Cisco TelePresence System 3200 OL-14521-01...
  • Page 23 Building the Display Assembly Step 8 Attach the upper and lower Support crossbars to the center Display structure. Figure 2-7 Upper and Lower Support crossbars Use the screw holes nearest the ends of the Support crossbars. OL-14521-01 Parts List Cisco TelePresence System 3200...
  • Page 24 If your room size and room lighting pattern allow extra space, add extra space to these minimum measurements. Figure 2-8 Positioning the Display Structures Minimum 24 inches Minimum 12 inches (30.5 cm) Minimum 24 inches (70 cm) (70 cm) Cisco TelePresence System 3200 2-10 OL-14521-01...

  • Page 25: Parts List

    The Display shelves are used in this chapter for Kit # leveling purposes only. The Display shelves and the 74-5304-xx attaching bracketing hardware are described in Chapter 4, “Building the Display Shelf Assembly.” 95-9694-xx Kit # 74-5306-xx 95-9693-xx Kit # 74-5305-xx 48-2273-01 Cisco TelePresence System 3200...

  • Page 26: Parts List

    Do not lift the display without appropriate back support, foot protection (such as steel-toed shoes), and Caution room to lift the display using your legs and not your back. Cisco TelePresence System 3200 Figure 3-8 illustrate the process of leveling the Plasma displays. You may want to...

  • Page 27: Purpose Of Leveling The Plasma Displays

    The Display shelf in front of each Plasma display acts as a visual bridge between the local and remote conference rooms. In order to provide the experience of one seamless conference area, the Display shelf must appear seamlessly integrated with the remote conference tables. Cisco TelePresence System 3200 OL-14521-01...

  • Page 28: Leveling Alignment Points

    Leveling the Display shelves and the Plasma displays, and aligning the seams of the Display shelves with the edges of the Plasma displays ensure that images displayed from the remote conference room match the local conference room configuration. Cisco TelePresence System 3200 Chapter 3 Mounting and Leveling the Plasma Displays...
  • Page 29 3-3. You may need to perform any or all of the illustrated goals several times while Level the Display shelves along the X and Y axes Purpose of Leveling the Plasma displays show how to use the leveling alignment Cisco TelePresence System 3200...
  • Page 30 Step 6 Use the Display tilt brackets to level the Plasma displays along the Y axis. You should level the center Plasma display first. Then align the left and right Plasma displays to the center display. Cisco TelePresence System 3200 OL-14521-01...
  • Page 31 Align the edges of Plasma displays Step 7 The gap between Plasma displays should be uniformly even from the top edge of the Plasma display to the bottom edge. You should try to make the gap as small as possible. Cisco TelePresence System 3200 OL-14521-01...
  • Page 32 Align the seams of the Display shelves with the seams between Plasma displays. Step 8 You may need to adjust the Plasma displays left to right so the seam created between the edges of two Plasma displays are aligned to the corresponding Display shelf seam. Cisco TelePresence System 3200 OL-14521-01...
  • Page 33 Figure 3-8 Complete the plasma display screen setup by applying the Black Buffer strips. Step 9 OL-14521-01 Align the seams of the Display shelves with the seams between Plasma displays Purpose of Leveling the Plasma displays Cisco TelePresence System 3200...
  • Page 34 Chapter 3 Mounting and Leveling the Plasma Displays Purpose of Leveling the Plasma displays Figure 3-9 Apply the Black Buffer strips Cisco TelePresence System 3200 3-10 OL-14521-01...

  • Page 35: Parts List

    Speaker board brackets Splines Draw bolts M8 x 20 mm screws OL-14521-01 C H A P T E R Part Number Notes 700-23600-xx 700-23599-xx 700-23598-xx 700-23336-xx 700-23337-xx 700-23345-xx Included with projector screen kit. No part number 51-4579-xx 48-2273-01 Cisco TelePresence System 3200...

  • Page 36: Chapter 4 Building The Display Shelf Assembly

    In order to prevent scratching the Display shelves, you should avoid putting any tools on the shelf Caution surfaces. The directions left and right refer to the assembly as you face the Plasma displays. Note Cisco TelePresence System 3200 Chapter 4 700-29441-01 Kit # 69-1837-xx 700-29442-01...
  • Page 37 Cisco TelePresence Elements.” Display structures, as illustrated in OL-14521-01 10 11 The Display shelves should be attached individually to the Figure 4-2, Chapter 8, “Assembling the Remaining Figure 4-3, and Figure 4-4. Cisco TelePresence System 3200 Parts List...
  • Page 38 Chapter 4 Building the Display Shelf Assembly Parts List Step 2 Attach the left Display shelf. Figure 4-2 Left Display shelf Cisco TelePresence System 3200 OL-14521-01...
  • Page 39 Step 3 Attach the center Display shelf Figure 4-3 Center Display shelf Refer to Note shelf. OL-14521-01 Figure 4-1 to see the hardware used to attach the center Display shelf to the left Display Parts List Cisco TelePresence System 3200...
  • Page 40 Attach the right Display shelf. Figure 4-4 Right Display shelf Refer to Note Display shelf. Cisco TelePresence System 3200 Figure 4-1 to see the hardware used to attach the right Display shelf to the center Chapter 4 Building the Display Shelf Assembly OL-14521-01...
  • Page 41 One wall of the left Accessory cabinet was removed from this illustration for clarity. Note Before you attach the Accessory cabinets to the brackets, use them as supports while assembling Note the table segments in OL-14521-01 Chapter 6, “Building the First Row Table Assembly.” Parts List Cisco TelePresence System 3200...
  • Page 42 Chapter 4 Building the Display Shelf Assembly Parts List Cisco TelePresence System 3200 OL-14521-01...
  • Page 43 Reflector transition piece: corner OL-14521-01 C H A P T E R Part Number Qty Ctn Notes 700-23749-xx 700-23752-xx 700-23750-xx 700-23745-xx 700-23746-xx 700-23747-xx 700-23748-xx 700-23899-xx 700-24126-xx 700-23897-xx 700-23898-xx 700-23896-xx 700-23826-xx 700-23827-02 700-23828-02 700-24152-xx 700-23731-xx 700-23734-xx 700-23735-xx 700-23756-xx 700-23757-xx 700-23758-xx Cisco TelePresence System 3200...

  • Page 44: Chapter 5 Building The Lighting Assembly

    Use caution when you move around the system during assembly to avoid contact with any exposed system edges. The directions left and right refer to the assembly as you face the Plasma displays. Note Cisco TelePresence System 3200 Part Number Qty Ctn Notes 700-23737-xx 74-5361-xx “Appendix B: Region- and...
  • Page 45 Chapter 5 Building the Lighting Assembly Parts List Assemble the six Support struts and six Lighting Support brackets. Step 1 Figure 5-1 Support struts and Lighting Support brackets Cisco TelePresence System 3200 OL-14521-01...
  • Page 46 Display structures. Figure 5-2 Use any of the six brackets that you assembled in Note the outer and inner Support brackets in Cisco TelePresence System 3200 Left and Right outer Support brackets (from Figure Chapter 5 Building the Lighting Assembly...
  • Page 47 Use any of the six brackets that you assembled in Note the outer and inner Support brackets in OL-14521-01 Four inner Support brackets (from Figure Figure 5-1) Step 1. There is no physical difference between 5-1. Cisco TelePresence System 3200 Parts List...
  • Page 48 Chapter 5 Building the Lighting Assembly Parts List Step 4 Attach the four End structure brackets to the ends of the Support crossbars. Figure 5-4 Four End structure brackets Cisco TelePresence System 3200 OL-14521-01...
  • Page 49 Chapter 5 Building the Lighting Assembly Parts List Step 5 Attach the three Reflector bottom trays to the Support brackets. Figure 5-5 Three Reflector bottom trays Cisco TelePresence System 3200 OL-14521-01...
  • Page 50 Chapter 5 Building the Lighting Assembly Parts List Step 6 Attach the two Reflector bottom spacers to join the three Reflector bottom trays. Figure 5-6 Two Reflector bottom spacers Cisco TelePresence System 3200 OL-14521-01...
  • Page 51 Attach the left and right (vertical) Reflector Bottom ends to the End Structure brackets and attach the compliance sticker to the left reflector bottom end. Figure 5-7 Left and Right (vertical) Reflector Bottom ends OL-14521-01 Parts List Cisco TelePresence System 3200...
  • Page 52 Chapter 5 Building the Lighting Assembly Parts List Step 8 Attach the Light Cup bracket to the left and right (vertical) Reflector Bottom ends. Figure 5-8 Light Cup bracket Cisco TelePresence System 3200 5-10 OL-14521-01...
  • Page 53 Chapter 5 Building the Lighting Assembly Parts List Step 9 Attach the three 5-foot Light fixtures inside the Reflector bottoms. Figure 5-9 Three 5-foot Light fixtures Cisco TelePresence System 3200 5-11 OL-14521-01...
  • Page 54 Attach the left and right 4-foot Side Light fixtures to the left and right (vertical) Reflector Bottom ends. Figure 5-10 Left and Right 4-foot Side Light fixtures The power cords for the Side Light fixtures should extend from the top through the Light Cup bracket Note (Figure 5-8). Cisco TelePresence System 3200 5-12 OL-14521-01...
  • Page 55 Chapter 5 Building the Lighting Assembly Parts List Step 11 Attach the two center Metal Trim panels. Figure 5-11 Two center Metal Trim panels Cisco TelePresence System 3200 5-13 OL-14521-01...
  • Page 56 Chapter 5 Building the Lighting Assembly Parts List Step 12 Attach the two side Metal Trim panels. Figure 5-12 Two side Metal Trim panels Cisco TelePresence System 3200 5-14 OL-14521-01...
  • Page 57 Chapter 5 Building the Lighting Assembly Parts List Step 13 Attach the center Plastic Diffuser panel. Figure 5-13 Center Plastic Diffuser panel Cisco TelePresence System 3200 5-15 OL-14521-01...
  • Page 58 Figure 5-14 Left and Right Plastic Diffuser panels Note The rounded corners of the left and right plastic diffuser panels point outward. Cisco TelePresence System 3200 5-16 OL-14521-01...
  • Page 59 Chapter 5 Building the Lighting Assembly Parts List Step 15 Attach the four L-brackets to the two (vertical) end Plastic Diffuser panels. Figure 5-15 Four L-brackets Cisco TelePresence System 3200 5-17 OL-14521-01...
  • Page 60 Chapter 5 Building the Lighting Assembly Parts List Step 16 Attach the two (vertical) Plastic Diffuser panels to the End Structure brackets. Figure 5-16 Two (vertical) Plastic Diffuser panels Cisco TelePresence System 3200 5-18 OL-14521-01...
  • Page 61 Slide the Plastic Diffuser Panel brace between the end (vertical) Plastic Diffuser panel and the left and right Plastic Diffuser panels. Figure 5-17 Plastic Diffuser Panel brace Note If a diffuser becomes scratched, use a black felt-tip permanent marker to cover the imperfection. Cisco TelePresence System 3200 5-19 OL-14521-01...
  • Page 62 Chapter 5 Building the Lighting Assembly Parts List Step 18 Attach the center Reflector top to the center Reflector bottom. Figure 5-18 Center Reflector top Do not tighten screws until completing Step Note Cisco TelePresence System 3200 5-20 OL-14521-01...
  • Page 63 Building the Lighting Assembly Parts List Step 19 Attach the left and right Reflector tops to the left and right Reflector bottoms. Figure 5-19 Left and Right Reflector tops Do not tighten screws until completing Step Note Cisco TelePresence System 3200 5-21 OL-14521-01...
  • Page 64 Step 20 Join the left, center, and right Reflector tops with the left and right Reflector Transition pieces. Figure 5-20 Left and Right Reflector Transition pieces Do not tighten screws until completing Step Note Cisco TelePresence System 3200 5-22 OL-14521-01...
  • Page 65 Step 21 Attach the left and right (vertical) Reflector ends to the left and right (vertical) Reflector Bottom ends. Figure 5-21 Left and Right (vertical) Reflector ends Note Do not tighten screws until completing Step Cisco TelePresence System 3200 5-23 OL-14521-01...
  • Page 66 Figure 5-22 Left and Right corner Reflector Transition pieces Tighten all screws from Figure 5-18 through Figure 5-22. The goal is to ensure the reflector pieces form Note a “seamless hood” around the lighting assembly. Cisco TelePresence System 3200 5-24 OL-14521-01...
  • Page 67 Metal Trim panels until you complete the cable routing in Cables.” OL-14521-01 Step 5 through to install the codecs; then see to continue the installation. Chapter 9, “Routing Power and Signal Cisco TelePresence System 3200 Parts List Step 8 Chapter 8, Chapter 4, 5-25...
  • Page 68 Chapter 5 Building the Lighting Assembly Parts List If required, use the white touch-up paint on the light reflectors to fix any minor cosmetic issues caused by assembly, shipping, or handling. Cisco TelePresence System 3200 5-26 OL-14521-01...
  • Page 69 Part Number Notes 800-28454-xx 800-28628-xx (left) 700-24275-xx 800-28625-xx 95-9690-xx Kit # 74-5302-xx 95-9687-xx Kit # 74-5300-xx 95-9686-xx Kit # 74-5299-xx 95-9689-xx Kit # 74-5301-xx 95-9691-xx Kit # 74-5303-xx 700-27292-xx No part number 51-4539-xx No part number 56-15736-xx Cisco TelePresence System 3200...

  • Page 70: Chapter 6 Building The First Row Table Assembly

    Use caution when you move around the system during assembly to avoid contact with any exposed system edges. Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Warning Cisco TelePresence System 3200 Chapter 6 Part Number Notes 48-2273-01 Included with Left tabletop hinge.
  • Page 71 Remove the Metal packaging braces from the Molded foam bumpers. Step 1 Figure 6-1 Step 2 Assemble the four Molded foam bumpers and the four Table leg bases. OL-14521-01 Metal packaging braces and their Molded foam bumpers Parts List Cisco TelePresence System 3200...
  • Page 72 Step 3 The outside left and outside right molded foam bumpers only have one I/O module each. The inner molded foam bumpers have two (see Cisco TelePresence System 3200 6-12). The other three legs each have two attachment brackets. Figure 6-4).

  • Page 73: Chapter 9 Routing Power And Signal Cables

    The flange on the I/O module cover place is wider on the bottom than on the top. Note Assemble the I/O modules for the inner molded foam bumpers. Step 4 OL-14521-01 Foam Bumper Assembly 22 23 24 Chapter 9, “Routing Power and Signal Cables.” Cisco TelePresence System 3200 Parts List...
  • Page 74 The flange on the I/O module cover place is wider on the bottom than on the top. Note Attach the right wing tabletop section to the right Accessory Cabinet bracket. Step 5 Cisco TelePresence System 3200 Foam Bumper Assembly 22 23 24 Chapter 6 Building the First Row Table Assembly Chapter 9, “Routing Power and Signal Cables.”...
  • Page 75 Tighten the draw bolt so the two table segments are connected snugly. While one person is tightening the draw bolt from below, it is important for the support person to maintain the alignment of the table segment edges. OL-14521-01 Cisco TelePresence System 3200 Parts List...
  • Page 76 Parts List Figure 6-6 Right Table segment The splines have different lengths. Use a spline that is slightly smaller than the slot in the table top. Note Attach the right most Table Leg. Step 7 Cisco TelePresence System 3200 OL-14521-01...
  • Page 77 While a draw bolt is being tightened, hold the table edges together to avoid damage to the draw bolt or the table segment. Tighten the draw bolts so the two table segments are connected snugly. OL-14521-01 Cisco TelePresence System 3200 Parts List...
  • Page 78 The splines have different lengths. Use a spline that is slightly smaller than the slot in the table top. Step 9 Attach the right center Table leg. Cisco TelePresence System 3200 6-10 Chapter 6 Building the First Row Table Assembly...
  • Page 79 Chapter 6 Building the First Row Table Assembly Parts List Figure 6-9 right center Table leg Attach the left Table segment. Step 10 The draw bolts have two halves that screw into a center piece. Cisco TelePresence System 3200 6-11 OL-14521-01...
  • Page 80 The splines have different lengths. Use a spline that is slightly smaller than the slot in the table top. Note Attach the left center Table leg. Step 11 Cisco TelePresence System 3200 6-12 Chapter 6 Building the First Row Table Assembly...
  • Page 81 Chapter 6 Building the First Row Table Assembly Parts List Figure 6-11 Left center Table leg Step 12 Attach the left most Table leg. Cisco TelePresence System 3200 6-13 OL-14521-01...
  • Page 82 The center microphone cable for the first row table must be seated in the cable channel on the underside of the center table segment in order to properly install the projector bracket. You can use tape to secure it in place. Cisco TelePresence System 3200 6-14 OL-14521-01...
  • Page 83 Chapter 9, “Routing Power and Signal Cables.” Figure 6-13 Microphone Assembly Attach the table door to the tabletop sections and attach the “please close” label to the underside of the Step 14 table door. Cisco TelePresence System 3200 6-15 OL-14521-01...
  • Page 84 Chapter 6 Building the First Row Table Assembly Parts List Figure 6-14 Left connecting Tabletop section Attach the center Privacy panel. Step 15 Cisco TelePresence System 3200 6-16 OL-14521-01...
  • Page 85 Chapter 6 Building the First Row Table Assembly Parts List Figure 6-15 Privacy Panel Assembly Rotated for clarity Attach the left Privacy panel. Step 16 Cisco TelePresence System 3200 6-17 OL-14521-01...
  • Page 86 Chapter 6 Building the First Row Table Assembly Parts List Figure 6-16 Privacy Panel Assembly Rotated for clarity Attach the right Privacy panel. Step 17 Cisco TelePresence System 3200 6-18 OL-14521-01...
  • Page 87 Chapter 6 Building the First Row Table Assembly Parts List Figure 6-17 Privacy Panel Assembly Rotated for clarity Attach the right wing Privacy panel. Step 18 Cisco TelePresence System 3200 6-19 OL-14521-01...
  • Page 88 Chapter 6 Building the First Row Table Assembly Parts List Figure 6-18 Privacy Panel Assembly Cisco TelePresence System 3200 6-20 OL-14521-01...

  • Page 89: Parts List

    Parts List Part Description Tabletop leg base Metal packaging brace Molded foam bumper Gutter and privacy panel support bracket, type 1 OL-14521-01 C H A P T E R Part Number Notes 800-28454-xx 700-24275-xx 800-28625-xx 700-27280-xx Cisco TelePresence System 3200...

  • Page 90: Chapter 7 Building The Second Row Table Assembly

    5 (sections 2 and 7) Privacy panel, section 1 (section 5) Privacy panel, section 2 (section 4) Privacy panel, section 3 (section 6) Privacy panel, section 4 (section 3) Cisco TelePresence System 3200 Chapter 7 Part Number Notes 700-27279-xx...
  • Page 91 “Appendix B: Region- and Country-Specific Equipment” number. 700-23305-01 37-0887-02 (3M) 37-0901-01 (10M) 37-0965-01 (12M) 37-0833-01 49-0326 48-2426-01 74-4743-01 Included in Microphone kit. Included in Microphone kit. 74-4787-01 Chapter 7, 8 To be provided 69-1880-01 48-2437-01 Parts List for part Cisco TelePresence System 3200...
  • Page 92 Cisco suggests you use the accessory cabinets to support and stabilize the table segments as you install them. Step 1 Remove the Metal packaging braces from the Molded foam bumpers. Cisco TelePresence System 3200 Chapter 7 Part Number Notes 69-1880-01...
  • Page 93 Chapter 7 Building the Second Row Table Assembly Parts List Figure 7-1 Metal packaging braces and their Molded foam bumpers Step 2 Assemble the seven Molded foam bumpers and the seven Table leg bases. Cisco TelePresence System 3200 OL-14521-01...
  • Page 94 The numbering for the cable gutters and privacy panels correspond to the numbering for the table top. When you attach the support brackets, it can be helpful to turn the table leg upside-down. Cisco TelePresence System 3200 OL-14521-01...
  • Page 95 Building the Second Row Table Assembly Parts List Figure 7-3 Gutter and Privacy Panel Support Brackets, Type 1 6(8) 3(6) 7(1) Attach the second set of five support brackets to the table legs. Step 4 Cisco TelePresence System 3200 OL-14521-01...
  • Page 96 While one or more assistants keep the table legs steady, attach the section 1 (section 5) gutter panel to the section 1 (section 5) table legs. When you attach the support brackets, it can be helpful to turn the table leg upside-down. Cisco TelePresence System 3200 OL-14521-01...
  • Page 97 Building the Second Row Table Assembly Parts List Figure 7-5 Section 1 (Section 5) Gutter Panel 6(8) 3(6) 7(1) Attach the section 2 (section 4) gutter panel to the section 2 (section 4) table legs. Step 6 Cisco TelePresence System 3200 OL-14521-01...
  • Page 98 Building the Second Row Table Assembly Parts List Figure 7-6 Section 2 (Section 4) Gutter Panel 6(8) 3(6) 7(1) Step 7 Attach the Section 3 (section 6) gutter panel to the Section 3 (section 6) table legs. Cisco TelePresence System 3200 7-10 OL-14521-01...
  • Page 99 Attach the section 4 (section 3) gutter panel to the section 4 (section 3) table legs. Step 8 If you are building a Reduced Configuration table (four tabletops instead of six), continue to Step 11 Note after completing this step. Cisco TelePresence System 3200 7-11 OL-14521-01...
  • Page 100 Building the Second Row Table Assembly Parts List Figure 7-8 Section 4 (Section 3) Gutter Panel 6(8) 3(6) 7(1) Attach the left section 5 (section 7) gutter panels to the remaining table legs. Step 9 Cisco TelePresence System 3200 7-12 OL-14521-01...
  • Page 101 Building the Second Row Table Assembly Parts List Figure 7-9 Section 5 (Left) Gutter Panels 6(8) 3(6) 7(1) Attach the right section 5 (section 2) gutter panels to the remaining table legs. Step 10 Cisco TelePresence System 3200 7-13 OL-14521-01...
  • Page 102 Assemble the I/O modules for the outside left and outside right molded foam bumpers. Step 11 The outside left and outside right molded foam bumpers only have one I/O module each. The inner molded foam bumpers have two (see Figure 7-12). Cisco TelePresence System 3200 7-14 OL-14521-01...
  • Page 103 Note The flange on the I/O module cover piece is wider on the bottom than on the top. Note OL-14521-01 Foam Bumper Assembly 47 48 49 Chapter 9, “Routing Power and Signal Cables.” Cisco TelePresence System 3200 Parts List 7-15...
  • Page 104 Note Cables.” Figure 7-13 Second Row PDUs Attach the first set of floating brackets to the table assembly. Step 14 Cisco TelePresence System 3200 7-16 Foam Bumper Assembly 47 48 49 Chapter 7 Building the Second Row Table Assembly Chapter 9, “Routing Power and Signal...
  • Page 105 After you attach the brackets with the shoulder screws, move the brackets left and right to ensure that Note they can move freely. OL-14521-01 3(6) 12 56 Chapter 9, “Routing Power and Signal Cisco TelePresence System 3200 Parts List Chapter 9, “Routing 6(8) 7-17...
  • Page 106 Parts List Figure 7-15 Floating Brackets, Type 2 7(1) Attach the privacy panel hangers to the table assembly. Step 16 Figure 7-16 Privacy Panel Hanger Cisco TelePresence System 3200 7-18 Chapter 7 Building the Second Row Table Assembly 3(6) OL-14521-01 6(8)
  • Page 107 Insert the plastic spline in the slot between the two table sections and join the sections together, then insert and tighten the draw bolts evenly on each side until the tabletop sections are joined. OL-14521-01 Cisco TelePresence System 3200 Parts List 7-19...
  • Page 108 Note If you are building a Reduced Configuration table (four tabletops instead of six), continue to after completing this step. Cisco TelePresence System 3200 7-20 Chapter 7 3(6)
  • Page 109 Place the left tabletop section 5 (section 7) on the table assembly and join it to table section 3 (section 6) using either the spline or biscuits, then use the draw bolts to join the sections. Cisco TelePresence System 3200 7-21...
  • Page 110 Place the right tabletop section 5 (section 2) on the table assembly and join it to table section 4 (section Step 21 3) using either the spline or biscuits, then use the draw bolts to join the sections. Cisco TelePresence System 3200 7-22 OL-14521-01...
  • Page 111 Building the Second Row Table Assembly Parts List Figure 7-21 Tabletop, Section 5 Right (Section 2) Step 22 Attach the left tabletop end to tabletop section 5 using the using the draw bolts, spline or biscuits, and alignment plate. Cisco TelePresence System 3200 7-23 OL-14521-01...
  • Page 112 Chapter 7 Building the Second Row Table Assembly Parts List Figure 7-22 Left Tabletop End, Draw Bolts, Spline and Alignment Plate 6(8) Attach the Right tabletop end. Step 23 Cisco TelePresence System 3200 7-24 OL-14521-01...
  • Page 113 Chapter 7 Building the Second Row Table Assembly Parts List Figure 7-23 Right Tabletop End 7(1) Attach tabletop sections 1 and 2 to the table leg. Step 24 Cisco TelePresence System 3200 7-25 OL-14521-01...
  • Page 114 Chapter 7 Building the Second Row Table Assembly Parts List Figure 7-24 Tabletop Sections 1 and 2 and Table Leg Attach tabletop sections 1 and 3 to the table leg. Step 25 Cisco TelePresence System 3200 7-26 OL-14521-01...
  • Page 115 Attach tabletop sections 2 and 4 to the table leg. Step 26 If you are building a Reduced Configuration table (four tabletops instead of six), continue to Step 30 Note after completing this step. Cisco TelePresence System 3200 7-27 OL-14521-01...
  • Page 116 Chapter 7 Building the Second Row Table Assembly Parts List Figure 7-26 Tabletop Sections 2 and 4 and Table Leg Attach tabletop sections 3 and 5 to the table leg. Step 27 Cisco TelePresence System 3200 7-28 OL-14521-01...
  • Page 117 Chapter 7 Building the Second Row Table Assembly Parts List Figure 7-27 Tabletop Sections 3 and 5 and Table Leg Attach tabletop sections 4 and 5 to the table leg. Step 28 Cisco TelePresence System 3200 7-29 OL-14521-01...
  • Page 118 Chapter 7 Building the Second Row Table Assembly Parts List Figure 7-28 Tabletop Sections 4 and 5 and Table Leg Attach the reinforcement screws for the gutter panels. Step 29 Cisco TelePresence System 3200 7-30 OL-14521-01...
  • Page 119 Parts List Figure 7-29 Gutter Panel Reinforcement Screws Attach the panel end brace to the table leg and left tabletop end and attach the table leg to the tabletop Step 30 and tabletop end. Cisco TelePresence System 3200 7-31 OL-14521-01...
  • Page 120 Panel End Braces, Table Leg, Left Tabletop End and Table Section 5 (Section 7) Attach the panel end brace to the table leg and right tabletop end, then attach the table leg to the tabletop Step 31 and tabletop end. Cisco TelePresence System 3200 7-32 OL-14521-01...
  • Page 121 Attach the privacy panel alignment bracket to the underside of table section 1 (section 5). Step 32 Figure 7-32 Section 1 (Section 5) Privacy Panel Alignment Bracket Attach the privacy panel alignment bracket to the underside of table section 2 (section 4). Step 33 OL-14521-01 Cisco TelePresence System 3200 Parts List 7-33...
  • Page 122 Attach the privacy panel alignment bracket to the underside of table section 4 (section 3). Step 35 Note If you are building a Reduced Configuration table (four tabletops instead of six), continue to after completing this step. Cisco TelePresence System 3200 7-34 Chapter 7 Building the Second Row Table Assembly Step 38...
  • Page 123 Attach the privacy panel alignment bracket to the underside of left table section 5 (section 7. Step 36 Figure 7-36 Left Section 5 (Section 7) Privacy Panel Alignment Bracket Attach the privacy panel alignment bracket to the underside of right table section 5 (section 2). Step 37 OL-14521-01 Parts List Cisco TelePresence System 3200 7-35...
  • Page 124 Attach one microphone to each table segment and attach the microphone extension cords to the Step 38 microphone cables. There are six microphones for the second row table (if you have a CTS 3200 reduced configuration, there are four microphones for the second row table).
  • Page 125 Do not fully tighten the screws until you attach all privacy panels. You perform final spacing adjustments Note after you attach the last panel. Cisco TelePresence System 3200 7-37 OL-14521-01...
  • Page 126 Chapter 7 Building the Second Row Table Assembly Parts List Figure 7-39 Section 1 (Section 5) Privacy Panel Attach the privacy panel for section 2 (section 4) to the table assembly. Step 40 Cisco TelePresence System 3200 7-38 OL-14521-01...
  • Page 127 Chapter 7 Building the Second Row Table Assembly Parts List Figure 7-40 Section 2 (Section 4) Privacy Panel Attach the privacy panel for section 3 (section 6) to the table assembly. Step 41 Cisco TelePresence System 3200 7-39 OL-14521-01...
  • Page 128 Attach the privacy panel for section 4 (section 3) to the table assembly. Step 42 If you are building a Reduced Configuration table (four tabletops instead of six), continue to Step 45 Note after completing this step. Cisco TelePresence System 3200 7-40 OL-14521-01...
  • Page 129 Chapter 7 Building the Second Row Table Assembly Parts List Figure 7-42 Section 4 (Section 3) Privacy Panel Attach the privacy panel for left section 5 to the table assembly. Step 43 Cisco TelePresence System 3200 7-41 OL-14521-01...
  • Page 130 Chapter 7 Building the Second Row Table Assembly Parts List Figure 7-43 Left Section 5 (Section 2) Privacy Panel Attach the privacy panel for right section 5 to the table assembly. Step 44 Cisco TelePresence System 3200 7-42 OL-14521-01...
  • Page 131 Adjust panels until all seams between the panels are even, then fully tighten the knob screws. Step 45 Start with the seam between sections 1 and 2. The seam between the table tops should align with the Note seam between the privacy panels. Cisco TelePresence System 3200 7-43 OL-14521-01...
  • Page 132 Adjusting the Privacy Panels Attach the cable cover for the right end privacy panel. Step 46 Install the cable cover so that it hides the cables that come out of the right side of the table section. Cisco TelePresence System 3200 7-44 OL-14521-01...
  • Page 133 Chapter 7 Building the Second Row Table Assembly Parts List Figure 7-46 Cable Cover Step 47 Attach the privacy panel end pieces and the cable cover for the right end privacy panel. Cisco TelePresence System 3200 7-45 OL-14521-01...
  • Page 134 Privacy Panel End Pieces Position the second row table so that the trailing edge of the first row table is exactly 59 inches (150 cm) Step 48 behind the leading edge of the second row table. Cisco TelePresence System 3200 7-46 OL-14521-01...
  • Page 135 Chapter 7 Building the Second Row Table Assembly Parts List Figure 7-48 Second Row Table Positioning 59” (150 cm) 59” (150 cm) 59” (150 cm) Cisco TelePresence System 3200 7-47 OL-14521-01...
  • Page 136 Chapter 7 Building the Second Row Table Assembly Parts List Cisco TelePresence System 3200 7-48 OL-14521-01...
  • Page 137 Display structure. 48-0654-xx N/A These screws are included with the camera assembly and are used to attach the top and bottom hoods to the camera assembly. 74-4824-xx 74-6687-01 700-23824-xx 69-1691-xx 48-2273-xx 48-1963-xx 48-2273-xx Cisco TelePresence System 3200...
  • Page 138 Auxiliary Control Unit Auxiliary Control Unit Camera Target Assembly Tabletop camera target: large Tabletop camera target: small Cardboard ruler Cisco TelePresence System 3200 Chapter 8 Assembling the Remaining Cisco TelePresence Elements Part Number Notes 800-30638-xx CTS-CODEC- PRI-G2...

  • Page 139: C H A P T E R 8 Assembling The Remaining Cisco Telepresence Elements

    There are two additional brackets included with the accessory cabinet in Carton 33: 700-23338-xx and Note 700-23344-xx. These brackets attach the optional Ethernet switch to the left accessory cabinet. If you ordered this switch, refer to the Cisco TelePresence System Hardware Options & Upgrade Guide to install the switch.
  • Page 140 To make adjustments, loosen the four screws on the top of the camera assembly and move the assembly forward or back as required; then, retighten the four screws. Figure 8-1 Camera Assembly Cisco TelePresence System 3200 OL-14521-01...
  • Page 141 Chapter 8 Assembling the Remaining Cisco TelePresence Elements Parts List Step 2 Attach the projector to the projector mounting bracket. Figure 8-2 Projector Assembly Cisco TelePresence System 3200 OL-14521-01...
  • Page 142 There is a channel that is cut into the underside of the table. Route the cable for the center microphone into this channel, using tape if required, so that the microphone cable is not pinched between the bracket and the table. Figure 8-3 Projector Assembly Cisco TelePresence System 3200 Chapter 8 Assembling the Remaining Cisco TelePresence Elements OL-14521-01...
  • Page 143 Assembling the Remaining Cisco TelePresence Elements Parts List Step 4 Attach the VGA module to the center Table segment. The VGA module supports the VGA peripheral cable when not in use. Figure 8-4 Projector Assembly Cisco TelePresence System 3200 OL-14521-01...
  • Page 144 Chapter 8 Assembling the Remaining Cisco TelePresence Elements Parts List Step 5 Attach the Cable management bars to the three Codecs. Figure 8-5 Codec Assembly Cisco TelePresence System 3200 OL-14521-01...
  • Page 145 Chapter 8 Assembling the Remaining Cisco TelePresence Elements Parts List Step 6 Attach the Codec attachment brackets to the three Codecs. Figure 8-6 Codec Assembly Cisco TelePresence System 3200 OL-14521-01...
  • Page 146 Attach the three codecs to the display structure codec safety trays. If you ordered a Presentation Codec with your TelePresence system, refer to the Cisco TelePresence Note Hardware Options and Upgrade Guide for instructions to install your presentation codec. Figure 8-7 Codec Assembly Cisco TelePresence System 3200 8-10 OL-14521-01...
  • Page 147 Assembling the Remaining Cisco TelePresence Elements Parts List Step 8 Attach the Speaker board feet to the Speaker boards. The feet should angle towards the rear of the Display structure. Figure 8-8 Speaker Assembly Cisco TelePresence System 3200 8-11 OL-14521-01...
  • Page 148 Chapter 8 Assembling the Remaining Cisco TelePresence Elements Parts List Step 9 Attach the Speaker boards to the Speaker board brackets on the underside of the Display shelves. Figure 8-9 Speaker Assembly Cisco TelePresence System 3200 8-12 OL-14521-01...
  • Page 149 Chapter 8 Assembling the Remaining Cisco TelePresence Elements Parts List Step 10 Attach the Speakers to the Speaker boards. Figure 8-10 Speaker Assembly Cisco TelePresence System 3200 8-13 OL-14521-01...
  • Page 150 Note used to build and attach the projector screen. The Projector Screen Assembly manual is included in the projector screen carton. Figure 8-11 Projector Screen Assembly Cisco TelePresence System 3200 8-14 Chapter 8 Assembling the Remaining Cisco TelePresence Elements OL-14521-01...
  • Page 151 Chapter 8 Assembling the Remaining Cisco TelePresence Elements Parts List Step 12 Attach the audio/video extension unit to its bracket. Figure 8-12 Audio/Video Extension Unit and Bracket Cisco TelePresence System 3200 8-15 OL-14521-01...
  • Page 152 Chapter 8 Assembling the Remaining Cisco TelePresence Elements Parts List Step 13 Attach the audio/video extension unit to the rear of the display assembly. Figure 8-13 Audio/Video Extension Unit Cisco TelePresence System 3200 8-16 OL-14521-01...
  • Page 153 Parts List Step 14 Attach the auxiliary control unit to its bracket using 5 mm screws; then, attach the unit and bracket to the rear of the display assembly. Figure 8-14 Auxiliary Control Unit Cisco TelePresence System 3200 8-17 OL-14521-01...
  • Page 154 When you slide the Camera target into the frame, make sure the target is centered in the frame between the vertical lines at the top and bottom of the target. Figure 8-15 Cisco TelePresence System 3200 8-18 Chapter 8 Camera Target Assembly...
  • Page 155 37-0833-01 37-0852-01 Used for projector. 37-0853-01 51-4582-01 51-4536-01 51-0609-01 36-0244-01 37-0980-01 Packaged with Auxiliary Control unit 37-1078-01 For external display Kit # 69-2031-01 Included with Included with the microphone kit 74-4743-xx “Appendix B: Region- and Cisco TelePresence System 3200...

  • Page 156: Power Requirements For The Cisco Telepresence 3200

    Correct routing of the various power cords to the PDUs and auxiliary control unit is critical for the safety Caution and success of the Cisco TelePresence 3200. Route each power unit to a different 20 amp circuit to prevent circuit overload when all the electrical components are properly installed.
  • Page 157 Chapter 9 Routing Power and Signal Cables Power Requirements for the Cisco TelePresence 3200 Attach the left Power Distribution Unit (PDU) to the left Accessory cabinet. Step 1 The accessory cabinets each have screw holes for two PDUs on one side wall and screw holes for one PDU on the other.
  • Page 158 Chapter 9 Routing Power and Signal Cables Power Requirements for the Cisco TelePresence 3200 Step 2 Attach the right PDU to the right Accessory cabinet. Figure 9-2 Right Side PDU Installation To Right Accessory Cabinet Cisco TelePresence System 3200 OL-14521-01...
  • Page 159 Chapter 9 Routing Power and Signal Cables Power Requirements for the Cisco TelePresence 3200 Step 3 Attach the table assembly PDU attachment to the center privacy panel. Figure 9-3 Table assembly PDU attachment to the center Privacy panel The PDU power cable should extend from the right side.
  • Page 160 Power Requirements for the Cisco TelePresence 3200 Step 4 Route the power cables for the first row table assembly. Figure 9-4 First Row Table Assembly Cable Routing The six jumper cords from the I/O modules in the table legs route to the center PDU.
  • Page 161 VGA Peripheral Route the Table Leg Signal cables behind the Display structure, along with the other signal cables, but Note do not plug them into any Codec. OL-14521-01 Step Power Requirements for the Cisco TelePresence 3200 Cisco TelePresence System 3200...
  • Page 162 Power Requirements for the Cisco TelePresence 3200 Step 6 Route the second row microphone extension cables to the rear of the CTS 3200. If required, use the microphone extension cables that are included in the microphone kit to lengthen the cables.
  • Page 163 Chapter 9 Routing Power and Signal Cables Power Requirements for the Cisco TelePresence 3200 Step 7 If your installation provides Ethernet connectivity for second row meeting participants, attach the Ethernet cables to the modules in the foam bumpers and route the Ethernet cables.
  • Page 164 Chapter 9 Routing Power and Signal Cables Power Requirements for the Cisco TelePresence 3200 Step 8 If your installation provides power to second row meeting participants, route the power cables for the second row table. Figure 9-8 Second Row Table Power Cable Routing...
  • Page 165 If you encounter any problems with the HD Video cable that runs between the projector and the codec, Note order the part number CTS-CAB-HDMI-HDMI as a replacement. OL-14521-01 Power Requirements for the Cisco TelePresence 3200 Cisco TelePresence System 3200 9-11...
  • Page 166 Power Requirements for the Cisco TelePresence 3200 Figure 9-9 Cabling the Cisco Unified IP Phone, DVI-to-VGA, and Projector HD Video Cables The VGA Peripheral cable is the free-hanging cable resting in the VGA module attached to the center Note Table segment.
  • Page 167 Figure 9-10 Cabling the Speakers Figure 9-10 displays the rear view of the Cisco TelePresence System 3200. Left and right are reversed. Note Before plugging cables into the Codec, label each one. For example, Left Speaker, Center Speaker. Cisco TelePresence System 3200...
  • Page 168 Power Requirements for the Cisco TelePresence 3200 Step 11 Connect the following cables to the auxiliary control unit: Attach and route the power cables for the lighting assembly by connecting the lights to the auxiliary • control unit. Connect the DSUB to 8-P MINI DIN cable between the projector and the auxiliary control unit.
  • Page 169 Signal Power Note Figure 9-12 displays the rear view of the Cisco TelePresence System 3200. Left and right are reversed. Before you plug cables into a Codec or PDU, label each cable. OL-14521-01 Power Requirements for the Cisco TelePresence 3200...
  • Page 170 HD Video cables separately and use cable ties to tie them to opposite sides of the frame Figure 9-13 displays the rear view of the Cisco TelePresence System 3200. Left and right are reversed. Before you plug cables into a codec, label each cable.
  • Page 171 Chapter 9 Routing Power and Signal Cables Power Requirements for the Cisco TelePresence 3200 Step 14 Attach the ferrite cores to the ends of all six camera cables (both the video and Ethernet cables, 12 ferrite cores total). Wrap the cables around the ferrite as shown in Figure 9-14.
  • Page 172 Power Requirements for the Cisco TelePresence 3200 Step 15 Attach the cables between the codecs. If you ordered a presentation codec with your TelePresence system, refer to Note cabling instructions. Figure 9-15 Inter-Codec Cabling Center Left Right Auxilliery Audio Expansion Unit...
  • Page 173 Chapter 9 Routing Power and Signal Cables Power Requirements for the Cisco TelePresence 3200 Figure 9-15 displays the rear view of the Cisco TelePresence System 3200. Left and right are reversed. Note Connect the power cables for the codecs. Step 16...
  • Page 174 Power Requirements for the Cisco TelePresence 3200 Step 17 Connect the microphone cables to the codec and audio/video extension unit. If you have a Reduced Configuration for your second row table (four tabletops instead of six), use the Note same connections, but omit the connections (white connection 2 and red connection 3) for the two outer table tops.
  • Page 175 Chapter 9 Routing Power and Signal Cables Power Requirements for the Cisco TelePresence 3200 Before plugging cables into the Codec, label each one. Cisco TelePresence System 3200 9-21 OL-14521-01...
  • Page 176 Power Requirements for the Cisco TelePresence 3200 Cable routing for a standard CTS-3200 installation is shown in Figure 9-18 Cable Routing for Standard CTS-3200 Projector Serial Video In Center Left Right Speaker First Row Center Microphone Cisco TelePresence System 3200...
  • Page 177 Chapter 9 Routing Power and Signal Cables Cable routing for a standard CTS-3200 installation that uses a presentation codec is shown in Figure 9-19. Refer to the TelePresence Hardware Options and Upgrade Guide Figure 9-19 Cable Routing for CTS-3200 with Presentation Codec...
  • Page 178 Power Requirements for the Cisco TelePresence 3200 Step 18 (Optional) If your installation uses an optional external display or a document camera, install and route the cabling. Use the HD Video cable, part number 37-1078-01, to connect the external display.
  • Page 179 Chapter 9 Routing Power and Signal Cables Figure 9-20 Cabling Diagram: CTS 3200 Installations with an External Display and Document Camera Projector Serial Video In Center Left Right Audio Expansion Unit Speaker First Row Center Microphone OL-14521-01 Power Requirements for the Cisco TelePresence 3200...
  • Page 180 Power Requirements for the Cisco TelePresence 3200 Step 19 (Optional) If your installation uses an external display or a document camera with a presentation codec, install and route the cabling. Because you need to split the video signal between the projector and any additional video output, you Note must purchase at least one extra cable to connect optional external display(s).
  • Page 181 Chapter 9 Routing Power and Signal Cables Figure 9-21 Cabling Diagram: CTS 3200 Installations with a Presentation Codec, External Display and Document Camera Projector Serial Video In Presentation Codec Signal Document Camera Signal Auxiliary Video In Video Out Center Left Right...
  • Page 182 Chapter 9 Routing Power and Signal Cables Power Requirements for the Cisco TelePresence 3200 Cisco TelePresence System 3200 9-28 OL-14521-01...

  • Page 183: First-Time Setup

    Power on the three PDUs in that are located on the accessory cabinets and the single PDU that is Step 2 underneath the first row table (near the projector). OL-14521-01 C H A P T E R Part Number 800-30872-01 68-3277-01 48-2426-01 Cisco TelePresence System 3200 Notes 10-1...

  • Page 184: Chapter 10 First-Time Setup

    10-2. You use that information to log in to the Cisco TelePresence System Administration. This IP address displays until you log in to Cisco TelePresence System Administration or use Secure Shell (SSH) to log in to the CTS-3200. Cisco TelePresence System 3200...
  • Page 185 First-Time Setup Figure 10-2 If the IP address that displays is 192.168.100.2, the CTS 3200 could not contact the DHCP server or your system does not use DHCP. If your network does not use DHCP, navigate to Configuration > IP Settings, change the DHCP Enabled setting to No, and specify a static IP address, subnet mask, gateway and DNS server.

  • Page 186: Configuring An Alternate Tftp Server (Optional)

    Step 2 Cisco TelePresence system. Cisco suggests that you set up CTS components in the following order: Setting Up the Displays, page 10-5 • Cisco TelePresence System 3200 10-4 Step 4 System” chapter of the Cisco TelePresence System Administrator's Guide...

  • Page 187: Setting Up The Displays

    Troubleshooting Displays Table 10-1 OL-14521-01 10-5. to troubleshoot problems with the images on the displays. Setting Up CTS Components “Selecting the Light Cisco TelePresence System 3200 10-5...

  • Page 188: Setting Up The Cameras

    The cameras are set up correctly when images are centered and in focus on the display screens and the white balance has been configured. The hardware setup software provides a camera Auto Adjust feature and a way to use targets to fine-tune the camera’s focus. Cisco TelePresence System 3200 10-6 Troubleshooting Chart for Display Problems...

  • Page 189: Starting The Software Setup

    When you slide the Camera target into the frame, make sure the target is centered in the frame between the vertical lines at the top and bottom of the target. OL-14521-01 Setting Up CTS Components Cisco TelePresence System 3200 10-7...
  • Page 190 Attach the large target to the underside of the center table section by placing the round pads on the Step 2 underside of the clamps into recesses that are drilled under the table. You can feel under the table to find the small round recesses. Cisco TelePresence System 3200 10-8 Camera Target Assembly Chapter 10...

  • Page 191: Adjusting The Zoom

    If one of the left/right screws is covered by the camera cable, use the other screw to make Note all left/right adjustments. OL-14521-01 Figure 10-5. Figure 10-4. Cisco TelePresence System 3200 Setting Up CTS Components 10-9...
  • Page 192 Remove the large target from the center part of the table, and attach it to the left part of the table, placing the underside of the clamps into the recessed holes. Cisco TelePresence System 3200 10-10 Camera Adjustment Screws...
  • Page 193 OL-14521-01 Figure 10-4. “Focusing the Camera” section on page Figure Figure 10-4. Setting Up CTS Components Figure 10-6. Vertical line Red plus sign within black cross Red lines Table edge 10-12. 10-7. Cisco TelePresence System 3200 10-11...

  • Page 194: Focusing The Camera

    Step 1 Arrange the large target five feet (152 cm) behind the small target. Step 2 Use a chair to prop up the large target. Cisco TelePresence System 3200 10-12 “Focusing the Camera” section on page Chapter 10 First-Time Setup...
  • Page 195 Adjust the focus on the camera by performing the following steps: Step 5 Loosen the thumbscrew for the lens focus ring. The ring is labeled “N-8”. OL-14521-01 5 ft Small target Cisco TelePresence System 3200 Setting Up CTS Components 10 ft rectangle Green rectangle...
  • Page 196 Place the large target behind the second row with the target mounted slightly behind in the position the user will occupy. Position the large target 10 feet (3 meters) behind the small target. Cisco TelePresence System 3200 10-14 Location of Focus and Zoom Rings...

  • Page 197: Attaching The Camera Hood Assembly

    OL-14521-01 10 ft Small target for more information. through Step 6 for the left camera. through Step 6 for the right camera. Setting Up CTS Components 10 ft Figure 10-12. Cisco TelePresence System 3200 10-15...
  • Page 198 Chapter 10 First-Time Setup Setting Up CTS Components Figure 10-12 Attaching the Camera Hood Assembly Troubleshooting Cameras Table 10-2 to troubleshoot problems with cameras. Cisco TelePresence System 3200 10-16 OL-14521-01...
  • Page 199 Chapter 10 First-Time Setup Table 10-2 Problem Cisco TelePresence 3000/3200 only Camera image appears on the wrong display. Image not positioned correctly. Image colors are incorrect. No image. No image. OL-14521-01 Troubleshooting Chart for Camera Problems Possible Cause Cables are plugged into the wrong connector ports.

  • Page 200: Setting Up The Speakers

    Troubleshooting Speakers Table 10-3 Table 10-3 Problem No sound is heard. Cisco TelePresence 3000/3200 only Sound heard at wrong speaker. Sound is not synchronized with video. Setting Up the Microphones The microphones are set up correctly when each microphone registers sound. You must supply sound at each microphone to complete setup.
  • Page 201 Setting Up CTS Components Possible Solution Move objects away from the microphone. Check that the cable from the microphone is plugged into the correct receptor on the codec. Plug all microphones into the primary codec. Cisco TelePresence System 3200 10-19...

  • Page 202: Setting Up The Projector

    Select Troubleshooting > Hardware Setup, then click the Presentation Devices radio button. Select the Test Pattern radio button. Click Start to begin the test. Turn on the projector by turning the projector power rocker switch to the ON position. Step 3 Cisco TelePresence System 3200...
  • Page 203 From Cisco TelePresence System Administration, click Set Projector Defaults to automatically Step 4 configure the projector for use with the CTS 3200. Set the group, number and data settings by completing the following steps: Step 5...

  • Page 204: Troubleshooting Presentation Devices

    Table 10-5 Problem Test pattern is not displayed. Test pattern is not displayed. Test pattern is not displayed. Cisco TelePresence System 3200 10-22 to troubleshoot problems with presentation devices. Troubleshooting Chart for Presentation Device Problems Possible Cause Projector power switch is off.

  • Page 205: Other Devices

    Check the cabling diagrams in “Routing Power and Signal Cables” chapter of the Cisco TelePresence System 3200 Assembly, Use & Care, and Field Replacement Unit Guide identify the correct port into which to insert the HD Video cable connector. The HD Video cable connector should be connected to auxiliary video out.
  • Page 206 Click the Refresh On/Off Status button to update the on/off status of each port. Click the Turn Selected Lights On/Off to test the selected light unit(s). – Click the Reset Auxiliary Control Unit to power cycle the Auxiliary Control Unit. – Cisco TelePresence System 3200 10-24 Chapter 10 First-Time Setup OL-14521-01...

  • Page 207: Use & Care Guide

    OL-14521-01 C H A P T E R Cisco TelePresence System 3200 11-1...

  • Page 208: Cleaning The Camera Lens

    Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Warning Installation of the equipment must comply with local and national electrical codes. Warning Cisco TelePresence System 3200 11-2 “Replacing the Projector—Part Number CTS-PRJTR-GEN1=” section on page Chapter 11 Use &...

  • Page 209: Complete List Of Spares For The Cisco Telepresence System 3200

    Revised: December 7, 2011, OL-14521-01 This chapter describes the steps you perform to replace the field-replaceable units (FRUs) for the Cisco TelePresence system and includes the following sections: Complete List of Spares for the Cisco TelePresence System 3200, page 12-1 • •...

  • Page 210: C H A P T E R 12 Field-Replaceable Unit Guide

    Speaker cover/projector screen for the Cisco TelePresence System 3000 Table hardware kit for the Cisco TelePresence System 3000 series Audio/video extension unit for Cisco TelePresence Systems 3000, 3010, 3200, and 3210 Cable from primary codec to audio/video extension unit HDMI-to-DVI-D cable, 3.0 meters HDMI-to-HDMI cable, 6.0 meters...
  • Page 211 Power and Ethernet connectivity for table legs—United Kingdom Loudspeaker and speaker cable for the Cisco TelePresence Systems 500, 1100, 1300, 3010, and 3210. This speaker does not work for the Cisco TelePresence System 3000 or 3200. Note High Fidelity Loudspeaker—All Systems except the Cisco TelePresence System 3000 and 3200—No speaker cable...

  • Page 212: Powering On The System

    Change the device MAC address to the MAC address for the new primary codec. The MAC address should be displayed on the codec. Power on the Cisco TelePresence 3200 by turning the power switches to the On position on the two left Step 2 PDUs, single right PDU, and auxiliary control unit.

  • Page 213: Replacing The Camera Cluster-Part Number Cts3K-Cam-Clst-G2

    Replacing the Camera Cluster—Part Number CTS3K-CAM-CLST-G2= Required Information, Tools, and Equipment To remove and replace the camera cluster for the Cisco TelePresence 3200, you need the following information, tools, and equipment: Cisco TelePresence System Release 1.4 Administrator’s Guide, OL-13676-03 •...

  • Page 214: Replacing A Plasma Display-Part Number Cts-Disp-65-Gen4

    * Tin snips • * Pallet jack or hand cart (for moving components) • * Safety gloves • Cisco TelePresence System 3200 12-6 Chapter 12 Field-Replaceable Unit Guide for more information. “Powering On the System” section on page for more information.

  • Page 215: Removing Audio Components

    • * Safety glasses * Box cutters • Cisco TelePresence 3200 Structure, Accessory, and Adjustment Assembly: Power screwdriver with 2.5, 3, and 6 mm (standard or round) Allen bits, or standard 2.5, 3, and 6 mm • Allen wrenches A round-head Allen bit allows the bit to work at an angle instead of only straight out, which is helpful in tight spots.

  • Page 216: Removing The Camera Cluster

    Remove the left tabletop wing section and set it aside. Step 3 Removing a Display Shelf Make sure to retain all screws, connectors, and other parts during the disassembly. Note Cisco TelePresence System 3200 12-8 12-4. Chapter 12 Field-Replaceable Unit Guide “Removing the Camera...

  • Page 217: Removing The Display Screen And Completing The Procedure

    Replacing a Plasma Display—Part Number CTS-DISP-65-GEN4= Procedure”. Procedure”. for cable locations and reference. for cable locations and reference. “Removing the Display Screen and Step 2 through Step 5 for the center display “Removing the Display Screen Cisco TelePresence System 3200 12-9...
  • Page 218 Note display screen. Attach the display mounting bracket you removed from the original display using six screws, and remove Step 9 the display handles. Cisco TelePresence System 3200 12-10 Removing the Display Mounting Bracket Chapter 12 Field-Replaceable Unit Guide OL-14521-01...
  • Page 219 Chapter 12 Field-Replaceable Unit Guide Figure 12-2 Turn the power switch on the Plasma display to the On position. Step 10 The rear of the replacement display will have either two HDMI connectors (see Step 11 connectors (see If the replacement display has two HDMI connectors, connect your existing signal cable to the codec...
  • Page 220 Chapter 12 Field-Replaceable Unit Guide Replacing a Plasma Display—Part Number CTS-DISP-65-GEN4= Figure 12-3 Power and Signal Connections for Displays with HDMI Connectors Codec On/Off Switch AC inlet Cisco TelePresence System 3200 12-12 OL-14521-01...
  • Page 221 Chapter 8, “Assembling the Remaining Cisco TelePresence Elements” Power and Signal Cables.” Step 17 Reassemble the display shelf sections. Chapter 4, “Building the Display Shelf Assembly.” OL-14521-01 Replacing a Plasma Display—Part Number CTS-DISP-65-GEN4= AC inlet On/Off Switch Codec DMP Chapter 9, “Routing Cisco TelePresence System 3200 12-13...

  • Page 222: Replacing A Speaker-Part Number Cts-Ldspkr

    Step 24 Replacing a Speaker—Part Number CTS-LDSPKR= Required Information, Tools, and Equipment To remove and replace a speaker for the Cisco TelePresence 3200, you need the following information, tools, and equipment: • Cisco TelePresence System Release 1.4 Administrator’s Guide, OL-13676-03 •...

  • Page 223: Removing And Replacing A Speaker

    Power on the system by completing the steps in the Step 9 Refer to the Cisco TelePresence System Administrator's Guide information. OL-14521-01 Replacing a Speaker—Part Number CTS-LDSPKR= “Powering On the System” section on page for your software release for more Cisco TelePresence System 3200 12-4. 12-15...

  • Page 224: Replacing A Codec Unit-Part Number Cts-Codec-Pri-G2= (Primary Codec) Or Cts-Codec-Sec= (Secondary Codec)

    Replacing a Codec Unit—Part Number CTS-CODEC-PRI-G2= (Primary Codec) or CTS-CODEC-SEC= (Secondary Codec) Required Information, Tools, and Equipment To remove and replace a codec unit for the Cisco TelePresence 3200, you need the following information, tools, and equipment: • Cisco TelePresence System Release 1.4 Administrator’s Guide, OL-13676-03 •...
  • Page 225 Replacing a Codec Unit—Part Number CTS-CODEC-PRI-G2= (Primary Codec) or CTS-CODEC-SEC= (Secondary Step 2 From the back of the Cisco TelePresence 3200, access the codec to be removed. Turn the power switch on the codec to the Off position. Step 3 Remove all cable ties holding the cables to the cable management bar.

  • Page 226: Replacing A Microphone-Part Number Cts-Mic

    Replacing a Microphone—Part Number CTS-MIC= Required Information, Tools, and Equipment To remove and replace a microphone for the Cisco TelePresence 3200, you need the following information, tools, and equipment: Cisco TelePresence System Release 1.4 Administrator’s Guide, OL-13676-03 •...

  • Page 227: Removing And Replacing A Microphone

    OL-14521-01 Replacing a Microphone—Part Number CTS-MIC= Figure 9-17 for a microphone cabling “Replacing a Microphone Without a to replace the microphone. “Replacing a to replace the microphone. Step for more information. Cisco TelePresence System 3200 12-19...

  • Page 228: Replacing A Microphone With A Microphone Extension Cable

    Loosen, but don’t remove, the mounting screws holding the projector assembly to the underside of the center tabletop. Remove the projector assembly by sliding the unit to the left and away from the mounting screws. Cisco TelePresence System 3200 12-20 Chapter 12...
  • Page 229 “Setting Up the Microphones” section on page 10-18 OL-14521-01 for more information. Replacing a Microphone—Part Number CTS-MIC= Chapter 7, “Building the Second Row for your software release for more for more information. for more information. Cisco TelePresence System 3200 12-21...

  • Page 230: Replacing A Light Fixture-Part Number Cts-Light-Fixt

    Replacing a Light Fixture—Part Number CTS-LIGHT-FIXT= Replacing a Light Fixture—Part Number CTS-LIGHT-FIXT= Required Information, Tools, and Equipment To disassemble and reassemble portions of the Cisco TelePresence 3200, you need the following information, tools, and equipment: Cisco TelePresence System Release 1.4 Administrator’s Guide, OL-13676-03 •...

  • Page 231: Replacing The Audio/Video Extension Unit-Part Number Cts-Av-Exp

    Step 7 Replacing the Audio/Video Extension Unit—Part Number CTS-AV-EXP= To remove and replace the audio/video extension unit for the Cisco TelePresence 3200, you need the following tools and equipment: Medium Phillips head screwdriver (for attaching the unit to its bracket) •...

  • Page 232: Replacing The Auxiliary Control Unit-Part Number Cts-Light-Ctrl

    10-18. Replacing the Auxiliary Control Unit—Part Number CTS-LIGHT-CTRL= To remove and replace the auxiliary control unit Cisco TelePresence 3200, you need the following tools and equipment: Medium Phillips head screwdriver (for attaching the unit to its bracket) • Large Phillips head screwdriver (for attaching the unit and bracket to the display structure) •...

  • Page 233: Replacing The Cisco Unified Ip Phone-Part Number Cp-7975G-Cts

    The Sanyo part number for the projector lamp is POA-LMP94 (all countries except China) or Note POA-LMP114 (China only). Power off the projector by turning off the power switch on the back of the unit. Step 1 Allow the project to cool down for at least 45 minutes, or wear heat-resistant gloves during the Step 2 replacement process.
  • Page 234 Reattach the power, video, and signal cables. Step 12 Step 13 Turn the power switch on the underside of the projector to the ON position. Step 14 Reset the lamp replacement counter by completing the following steps: Press the MENU button to display the on-screen menu.

  • Page 235: Replacing The Projector-Part Number Cts-Prjtr-Gen1

    One PDU in the cable gutter on the second row table section, Section 3 (second from the right) • On the PDU to be replaced, turn the power switch to Off and remove the plug from the wall receptacle. Step 1 Remove any cables plugged into the PDU.

  • Page 236: Replacing A Display Shelf

    PDU that is placed in the lower cable gutter. Attach the replacement PDU. Step 4 Plug in the jumper cords that were removed and turn the power switch to the On position. Step 5 Step 6 Plug the PDU power cord into the wall receptacle.

  • Page 237: Removing And Replacing A Display Shelf Row Table Section

    Loosen the draw bolts or cam locks and remove the connecting plates that attach the display shelf to be Step 8 replaced to its adjoining shelf or shelves. Figure 4-1 Note OL-14521-01 Figure 4-4. for the draw bolt and plate locations. Replacing a Display Shelf Figure 4-2, Cisco TelePresence System 3200 12-29...

  • Page 238: Replacing A First Row Table Top Section

    A 10 mm open end ratcheting wrench is useful to loosen and tighten the draw bolts or cam locks. Make sure to retain all screws, connectors, and other parts during the disassembly. Note Cisco TelePresence System 3200 12-30 Chapter 12 Chapter 8, “Assembling the Remaining...

  • Page 239: Removing And Replacing A First Row Table Top Section

    Replacing a First Row Table Top Section Figure 8-3 Figure 6-13 for an exploded has exploded drawings of the privacy panels. for the location of the draw bolts or cam locks. Cisco TelePresence System 3200 for an 12-31...

  • Page 240: Replacing A Second Row Table Top Section

    Using furniture sliders can make moving the second row table easier. Make sure to retain all screws, connectors, and other parts during the disassembly. Note Cisco TelePresence System 3200 12-32 Chapter 6, “Building the First Row Table Assembly” for microphone installation instructions.

  • Page 241: Removing And Replacing A Second Row Table Top Section

    Figure 7-30 for the panel end brace for the privacy panel hanger attachment for the floating bracket attachment points for the gutter panel attachment points and for the screw locations for the gutter and Cisco TelePresence System 3200 12-33...
  • Page 242 Attach the floating bracket on each side of the table top section. Chapter 7, “Building the Second Row Table Assembly” and screw locations. Cisco TelePresence System 3200 12-34 Chapter 7, “Building the Second Row Table Chapter 7, “Building the Second Row Table Assembly”...
  • Page 243 Replacing a Second Row Table Top Section for the privacy panel support bracket for the location of the privacy panel support Figure 7-30 for the end brace locations. Figure 7-46 and add cable Figure 7-48 for the correct second row Cisco TelePresence System 3200 12-35...
  • Page 244 Chapter 12 Field-Replaceable Unit Guide Replacing a Second Row Table Top Section Cisco TelePresence System 3200 12-36 OL-14521-01...

  • Page 245: Carton 1 Of 58: Mechanical Accessory Kit, Cts3K-Acc-Kit, 53-2855-Xx

    Cisco TelePresence System 3000 Assembly, Use & Care, and Field Replacement Unit Guide (pointer to online document) Chapter Parts List Reference Chapter 8 Chapter 7, 8 Chapter 8 Chapter 7, 8 Chapter 8 Chapter 8 Chapter 8 Chapter 8 Chapter 8 Cisco TelePresence System 3200...
  • Page 246 37-0852-01 Cisco TelePresence System 3200 Appendix A Part Description Regulatory Compliance and Safety Information Cisco TelePresence System 3200 Assembly, Use & Care, and Field Replacement Unit Guide (pointer to online document) ESD wrist strap “Please close” label M8 x 30 mm screw...

  • Page 247: Carton 3 Of 58: Primary Codec, Cts-Codec-Pri-G2, 800-30638-Xx

    Chapter 7 Chapter 7 Chapter 7, 8 Chapter 6, 7 “Appendix B: Region- and Country-Specific Equipment” specific part numbers. Chapter 4 Chapter 7, 8 Chapter 9 Chapter Parts List Reference Chapter Parts List Reference Chapter 8 Cisco TelePresence System 3200...

  • Page 248: Carton 5 Of 58: Secondary Codec, 800-28202-Xx, Cts-Codec-Sec

    Sub-Kit ID Kit ID Number Number Part Number 53-2907-01 48-1962-01 700-23449-xx Cable management bar 68-2898-xx Cisco TelePresence System 3200 Appendix A Part Description Primary Codec Part Description Camera Assembly M4 x 20 pan head screws M8 x 20 cap screws...

  • Page 249: Carton 7 Of 58: Projector, 74-4824-Xx, Cts-Prjtr-Gen

    Reference Chapter 8 Chapter Parts List Reference Chapter 8 Chapter Parts List Reference Chapter 8 Chapter Parts List Reference Chapter 8 Chapter Parts List Reference Chapter 8 “Appendix B: Region- and Country-Specific Equipment” specific part numbers. Cisco TelePresence System 3200...
  • Page 250 700-23363-xx Display tilt bracket 700-23426-xx Projector screen clips 700-23944-xx Speaker board brackets 1. These brackets are for an optional Ethernet switch; if you did not order this option, disregard these parts. Carton 14 of 58: Privacy Panel, Right Wing, 69-1628-xx, CTS3K-STRUCTURE...
  • Page 251 Carton 16 of 58: Front Foot Stabilizer, 69-1624-xx, CST3K-STRUCTURE Part Description Part Description Part Description Part Description Chapter Parts List Reference Chapter 2 Chapter Parts List Reference Chapter 2 Chapter Parts List Reference Chapter 2 Chapter Parts List Reference Chapter 5 Chapter 5 Cisco TelePresence System 3200...
  • Page 252 Carton 20 of 58: Accessory Kit for CTS-3200, 53-3108-xx, CTS32-ACC-KIT Carton 20 of 58: Accessory Kit for CTS-3200, 53-3108-xx, CTS32-ACC-KIT Subkit ID Kit ID Number Number Part Number 53-3108-01 78-17792-07 78-17839- 05B0 37-0887-02 37-0901-01 37-0965-01 37-0931-01 69-1830-01 700-23807-01 I/O blank, small...

  • Page 253: Carton 24 Of 58: Plasma Display, 74-4881-Xx, Cts-Disp-65-Gen

    Wood Top Accessory Kit Chapter Parts List Reference Chapter 3 Chapter Parts List Reference Chapter 3 Chapter Parts List Reference Chapter 6 Chapter 6 Chapter 6 Chapter 6 Chapter 6 Chapter 6 Chapter 6 Chapter 6 Cisco TelePresence System 3200...

  • Page 254: Carton 27 Of 58: Light Fixture, 74-5361-Xx, Cts-Light-Fixt

    74-5361-01 Carton 29 of 58: Light Fixture, 74-5361-xx, CTS-LIGHT-FIXT Sub-Kit ID Kit ID Number Number Part Number 74-5361-xx 74-5361-01 Cisco TelePresence System 3200 A-10 Appendix A Part Description 5 foot light fixture Part Description 5 foot light fixture Part Description...

  • Page 255: Carton 30 Of 58: Light Fixture, 74-5362-Xx, Cts-Light-Fixt

    Europe and Japan. Chapter Parts List Reference Chapter 4 “Appendix B: Region- and Country-Specific Equipment” lighting fixtures for Europe and Japan. Chapter Parts List Reference Chapter 7 Chapter 7 Chapter 7 Chapter 7 Chapter 7 Cisco TelePresence System 3200 A-11...

  • Page 256: Carton 34 Of 58: Privacy Panels, 69-1629-Xx, Cts3K-Structure

    Carton 36 of 58: Display Structure, 69-1622-xx, CTS3K-STRUCTURE Sub-Kit ID Kit ID Number Number Part Number 69-1622-xx 700-23358-xx Display structure Cisco TelePresence System 3200 A-12 Appendix A Part Description Part Description Part Description Part Description Appendix A: Parts List Sorted by Carton...
  • Page 257 Part Number 69-1622-xx 700-23358-xx Display structure Carton 38 of 58: Presentation Codec, 69-1887-xx, CTS-HFR-COLLAB-3K The presentation codec is an option for the Cisco TelePresence System 3200. For information about the Note presentation codec, refer to the Sub-Kit ID Kit ID Number...
  • Page 258 Carton 43 of 58: Foam Bumpers, 69-1634-xx, CTS3K-STRUCTURE Sub-Kit ID Kit ID Number Number Part Number 69-1634-xx 700-24275-xx Metal packaging brace 800-28625-xx Molded foam bumper Cisco TelePresence System 3200 A-14 Appendix A Part Description M5 x 12 mm screws Secondary Codec Part Description Part Description...
  • Page 259 Projector screen assembly Part Description Chapter Parts List Reference Chapter 4 Chapter 4 Chapter 4 Chapter Parts List Reference Chapter 7 Chapter 7 Chapter Parts List Reference Chapter 7 Chapter Parts List Reference Chapter 5, 6 Cisco TelePresence System 3200 A-15...
  • Page 260 700-23750-xx End structure brackets 700-23899-xx L-brackets 700-23752-xx Support struts 700-25050-01 Diffuser Panel braces / H-clips 69-1615-xx 48-2274-01 Cisco TelePresence System 3200 A-16 Appendix A Part Description Part Description M8 x 70 mm screws Appendix A: Parts List Sorted by Carton...

  • Page 261: Carton 50 Of 58: Cisco Telepresence 3200 Structure—Addition To Standard Cts

    Appendix A Appendix A: Parts List Sorted by Carton Carton 50 of 58: Cisco TelePresence 3200 Structure—Addition to Standard CTS-3000, CTS32-STRUCTURE, 69-1854-01 Sub-Kit ID Kit ID Number Number Part Number 48-2285-01 49-1165-01 48-2433-01 69-1657-xx 48-2273-01 Carton 50 of 58: Cisco TelePresence 3200 Structure—Addition to...
  • Page 262 Kit ID Number Number Part Number 69-1620-xx 69-1636-xx 700-23305-01 I/O Module Cover plate 800-28454-xx Tabletop leg base Cisco TelePresence System 3200 A-18 Appendix A Part Description Cable Cover for right end privacy panel Table leg screws M4 x 12mm flat head screws M4.0x10mm pan head screws...
  • Page 263 Part Description Chapter Parts List Reference Chapter 7 Chapter 6 Chapter Parts List Reference Chapter 4 Chapter 4 Chapter 4 Chapter Parts List Reference Chapter 7 Chapter 7 Chapter Parts List Reference Chapter 6 Chapter 6 Cisco TelePresence System 3200 A-19...
  • Page 264 74-5305-01 95-9693-01 74-5306-01 95-9694-01 74-5309-01 95-9697-01 69-1836-01 74-5307-01 74-5544-01 Cisco TelePresence System 3200 A-20 Appendix A Part Description Tabletop section: Center Tabletop section: Center right Tabletop section: Center left Tabletop section: Right wing Tabletop section: Left door Display shelf section: Left...
  • Page 265 The following countries and regions have equipment manufactured to local regulations. These photos are provided as a reference for the plug type. The power inserts for the I/O modules may Note be white or black in color and may vary from the photo. Cisco TelePresence System 3200 OL-14521-01...
  • Page 266 Asia Pacific Asia Pacific Part Description TelePresence Power Cord I/O modules: power/Ethernet Cisco TelePresence System 3200 Appendix B Part Number PWR-CORD10-AP 37-0831-01 CTS-LAPCONN-AP 74-4861-01 Appendix B: Region- and Country-Specific Equipment Photo OL-14521-01...

  • Page 267: Argentina B

    Appendix B Appendix B: Region- and Country-Specific Equipment Argentina Part Description Part Number TelePresence Power Cord PWR-CORD10-AR 37-0841-01 I/O modules: power/Ethernet CTS-LAPCONN-AR 74-4866-01 OL-14521-01 Photo Cisco TelePresence System 3200 Argentina...
  • Page 268 Australia Australia Part Description Part Number TelePresence Power Cord PWR-CORD10-AU 37-0840-01 I/O modules: power/Ethernet CTS-LAPCONN-AU 74-4866-01 Cisco TelePresence System 3200 Appendix B Appendix B: Region- and Country-Specific Equipment Photo OL-14521-01...

  • Page 269: Central Europe B

    Appendix B Appendix B: Region- and Country-Specific Equipment Central Europe Part Description Part Number TelePresence Power Cord PWR-CORD10-CE 37-0832-01 I/O modules: power/Ethernet CTS-LAPCONN-CE 74-4865-01 OL-14521-01 Photo Cisco TelePresence System 3200 Central Europe...
  • Page 270 PWR-CORD10-CN 37-0837-01 I/O modules: power/Ethernet CTS-LAPCONN-CN 74-4914-01 Projector 74-6687-01 Kit No. 69-1990-01 Projector mounting bracket 700-23824-03 Kit No. 69-1990-01 Center Privacy Panel 700-23334-02 Kit No. 69-1990-01 Cisco TelePresence System 3200 Appendix B Appendix B: Region- and Country-Specific Equipment Photo OL-14521-01...

  • Page 271: India, Uae, South Africa B

    Appendix B Appendix B: Region- and Country-Specific Equipment India, UAE, South Africa Part Description Part Number TelePresence Power Cord PWR-CORD10-ID 37-0838-01 I/O modules: power/Ethernet CTS-LAPCONN-ID 74-4864-01 OL-14521-01 Photo Cisco TelePresence System 3200 India, UAE, South Africa...
  • Page 272 Israel Israel Part Description Part Number TelePresence Power Cord PWR-CORD10-ISR 37-0842-01 I/O modules: power/Ethernet CTS-LAPCONN-ISR 74-4863-01 Cisco TelePresence System 3200 Appendix B Appendix B: Region- and Country-Specific Equipment Photo OL-14521-01...

  • Page 273: Italy B-

    Appendix B Appendix B: Region- and Country-Specific Equipment Italy Part Description Part Number TelePresence Power Cord PWR-CORD10-ITA 37-0832-01 I/O modules: power/Ethernet CTS-LAPCONN-ITA 74-4865-01 OL-14521-01 Photo Cisco TelePresence System 3200 Italy...
  • Page 274 Japan Japan Part Description TelePresence Power Cord I/O modules: power/Ethernet Cisco TelePresence System 3200 B-10 Appendix B Part Number Photo PWR-CORD10-JP 37-0847-01 CTS-LAPCONN-JP 74-4951-01 Appendix B: Region- and Country-Specific Equipment OL-14521-01...

  • Page 275: North America B

    Appendix B Appendix B: Region- and Country-Specific Equipment North America Part Description TelePresence Power Cord I/O modules: power/Ethernet OL-14521-01 Part Number Photo PWR-CORD10-NA 37-0847-01 CTS-LAPCONN-NA 74-4868-01 North America Cisco TelePresence System 3200 B-11...
  • Page 276 Switzerland Switzerland Part Description TelePresence Power Cord I/O modules: power/Ethernet Cisco TelePresence System 3200 B-12 Appendix B Part Number Photo PWR-CORD10-SWI 37-0843-01 CTS-LAPCONN-SWI 74-4862-01 Appendix B: Region- and Country-Specific Equipment OL-14521-01...

  • Page 277: United Kingdom B

    Appendix B Appendix B: Region- and Country-Specific Equipment United Kingdom Part Description Part Number TelePresence Power Cord PWR-CORD10-UK 37-0831-01 I/O modules: power/Ethernet CTS-LAPCONN-UK 74-4861-01 OL-14521-01 Photo Cisco TelePresence System 3200 United Kingdom B-13...
  • Page 278 Appendix B Appendix B: Region- and Country-Specific Equipment United Kingdom Cisco TelePresence System 3200 B-14 OL-14521-01...
  • Page 279 Cisco TelePresence System 3200 Pallet Dimensions and Description Revised: October 29, 2009, OL-14521-01 The following chapter provides you with the dimensions of the pallets for the Cisco TelePresence System 3200. Table C-1 Pallet Number OL-14521-01 A P P E N D I X...
  • Page 280 Cisco TelePresence System 3200. Table C-2 Pallet Description Pallet Number Description of Contents Cisco TelePresence System 3200 Appendix C Cisco TelePresence System 3200 Pallet Dimensions and Description Structure kit- 8 Cartons Accessory kit—includes the following: • IP phone • Microphone kit •...
  • Page 281 Appendix C Cisco TelePresence System 3200 Pallet Dimensions and Description Table C-2 Pallet Number Description of Contents OL-14521-01 Pallet Description (continued) Furniture (2 cartons) and lighting structure (1 carton) Part numbers are: CTS3K-STUCTURE • CTS3K-LIGHT-STR • Furniture Part number is CTS32-M-2TBL-G2...
  • Page 282 Appendix C Cisco TelePresence System 3200 Pallet Dimensions and Description Cisco TelePresence System 3200 OL-14521-01...

This manual is also suitable for:

Telepresence 3200

Table of Contents