Table of Contents
4 Disassembly and Assembly Instructions
Important notice: Before replacing any components, make sure to turn OFF the vacuum cleaner.
Remove the power plug from the outlet.
4.1.
Dust box cover assembly
removal
1. Open the dust box and remove the lead wire cover.
2. When removing the lead wire cover, use a flat-blade
screwdriver as an aid.
3. Remove the connectors from the lead wire AU and P.C.B.
DU.
4. Open the dust box lid assy at an angle of approximately
45 degrees and insert an flat-blade screwdriver into a gap
between the upper body and the dust box lid assy. Move
the screwdriver in the direction of the arrow to remove the
left fitting section of the dust box lid assy.
6
Table of Contents
