Black & Decker BWAC08WTB Instruction Manual page 14

SET UP & USE

3. Extend the side panels out against the window frame. (See Fig. 7)

4. Drive three 1/2" locking screws through filler panel holes into window sash on both

left and right sides. (See Fig. 8 & 9)

5. Place the frame lock between the frame extensions and the window sill. Drive 3/4"

locking screws through the frame lock and into the sill on both left and right sides.

(See Fig. 10)

NOTE: To prevent window sill from splitting, drill 1/8" pilot holes before driving

screws.

6. To secure lower sash in place, attach right angle sash lock with two 3/4" screws.

(See Fig. 11)

7. Cut foam seal strip and insert in the window space between the upper and lower

sashes.

(See Fig. 12)

Fig. 7

Fig. 10

Page 14

Fig. 8

Fig. 11

Fig. 9

Fig. 12