Table of Contents
3.3 Measurement
3.3.3 Wavelength Scan
NOTE: Pressing the [START] button on the operating screen
without pushing the sipping lever permits measuring the
sample without sipping.
(5) After the completion of the sample measurement, store or print
the measurement data.
Given below is the general measurement procedure for wavelength
scan.
(1) Switching to measurement screen
After setting the conditions, press the [Measurement] button on
the screen to move to the measurement screen.
Fig. 3-10 Screen to Proceed to Measurement Screen
To execute the baseline correction between an interval of
sample measurements, press
and follow the guidance to execute the baseline correction.
Fig. 3-11 User Baseline Measurement
3 - 8
[baseline correction] icon
Table of Contents
