Overview Of Operation Modes; Run Mode - GE Fuji Electric AF-300 Mini Startup Manual
Hide thumbs
Also See for Fuji Electric AF-300 Mini:
- Instructions manual (78 pages) ,
- Instructions manual (44 pages)
Table of Contents
Simultaneous keying
Simultaneous keying means depressing two keys at the same time (expressed by "+"). The AF-300 Mini supports
simultaneous keying as listed below.
(For example, the expression " +
Operation modes
Simultaneous keying
Run mode
+
Program mode
+
Alarm mode
+
3.2 Overview of Operation Modes
The AF-300 Mini features the following three operation modes:
Run mode:
This mode allows entering run/stop commands in regular operation. Running status may
also
be monitored in real time.
Program mode:
This mode allows checking function code data as well as a variety of other information
relating to drive status and maintenance.
Alarm mode:
If an alarm occurs, the drive automatically enters Alarm mode. The corresponding alarm
code* and its related information are displayed on the LED display.
* Alarm code: Shows the error factor that has activated the protection facility.
Figure 3.1 shows the status transition of the drive between these three operation modes.
3.2.1 Run Mode
If the drive is turned on, it automatically enters Run mode in which you may:
(1) Run/stop the motor
(2) Set up the set frequency and others
(3) Monitor the running status (e.g. output frequency, output current)
(4) Jog (inch) the motor
REFERENCE: For details, refer to Section 3.3, "Operation in Run mode."
keys" stands for pressing the
Used to:
keys
Control entry to/exit from jogging operation.
keys
Change special function code data.
(Refer to codes F00 and H03 in Chapter 5 "FUNCTION CODES.")
keys
Switch to Program mode.
For details, refer to Chapter 8, Section 8.6 "Protective Functions."
Figure 3.1 Status Transition between Operation Modes
3-2
key while holding the
key down.)
Chapters
Table of Contents
