Page 1
Operation Software for HD COLOR CORRECTOR HKSP-313 User’s Guide [Japanese/English] Universal Control Panel UCP-8060 1st Edition (Revised 2) Software Version 1.11 and Later...
調整つまみ m タスクバー n セレクト L、R ボタン l ステージパスエリア k ファンクションボタン j ジョグ L、R ボタン i ジョグローラー a メモリースティックスロット f ステータスエリア メモリースティックの挿入口です。ラベル面を上にして挿 HKSP-313 が装着されているスロット番号やエラー表示な 入します。 ど、現在のステータスを表示します。 ◆ 詳しくは、UCP-8060 の Operation Manual をご覧くださ g リストエリア い。 このソフトウェアでコントロールできる項目がボタンとし て表示されます。コントロールしたいボタンに触れると、 b システムインジケーター その項目を選択することができます。...
メニュー メニューの構成 このオペレーションソフトウェアのメニューは次のような 構成になっています。 Slot Slot1 Slot2 Slot3 Slot4 Slot5 Slot6 Slot7 Slot8 Slot9 Slot10 Slot11 Slot12 Slot13 Slot14 Slot15 Slot16 Slot17 Unit ID Convert Motion Select Line Convert 80P/35P 80C/35C MODE Line 720p メニュー...
Page 8
Setup Meta Data ARIB Tx UMID Line 9 Line 10 Line 11 Line 12 Line 13 Line 14 Line 15 Line 16 Line 17 Line 18 Line 19 Line 20 Rx UMID Line 9 Line 10 Line 11 Line 12 Line 13 Line 14 Line 15...
Page 9
Adjust Color Correct CLIP White Clip Black Clip White Clip Black Clip RGB1 RGB Master Gain R Gain G Gain B Gain Offset White Clip R White Clip G White Clip B White Clip R White Clip G White Clip B RGB2 Black Balance R Black Balance G...
Page 11
Setup Meta Data ARIB メタデータの挿入 ARIB データ送信機能の制御を行います。 システム設定を行 機能の設定を行い OFF:ARIB データの送信を行いません。 います。 ます。 ON:ARIB データを送信します。 ご注意 ・ Format の設定が 59.94i/60i/59.94P/60P 以外のときは、ボタンは暗く表示 され、選択できません。 ・ UMID が ARIB のラインに設定されていると、ARIB メニューの設定はできま せん。 Tx UMID UMID データ送信ライン番号を指定します。 OFF:UMID の送信を行いません。 Line 9 ~ Line 20:UMID データ送信ライン番号を指定します。 設定範囲:Line 9 ~...
Page 12
Setup Recall/Store Store (続き) デフォルト値の管 デフォルト値をストアします。 理を行います。 User Save:現在の設定をユーザーデフォルトとして保存します。 Recall デフォルト値の呼び出しを行います。 Factory:工場出荷時のデフォルト値を呼び出します。 User:ユーザーが設定したデフォルト値を呼び出します。 ご注意 User Save で設定を保存していない場合、User の初期設定値は工場出荷時と同 じになります。 Output Format 出力の設定を行い 出力ビデオ信号のフォーマットを選択します。 ます。 1080i/59.94:1080 ライン、59.94Hz、インターレース a) b) 1080i/50:1080 ライン、50Hz、インターレース 1080i/60:1080 ライン、60Hz、インターレース 1035i/59.94:1035 ライン、59.94Hz、インターレース 1035i/60:1035 ライン、60Hz、インターレース 1080p/23.98sF:1080 ライン、23.98Hz、プログレッシブ・セグメンテッ a) b) ド・フレーム...
Page 13
Adjust Color Correct CLIP White Clip カラーコレクト機 クリッピングの調 ホワイトクリップの調整を制御します。 出力ビデオ信号の 能の調整を行いま 整を行います。 OFF:ホワイトクリップ調整不可能となります。 調整を行います。 す。 ON:ホワイトクリップ調整可能となります。 ご注意 ご注意 Color Correct ご注意 MODE の設定が Mode の設定が OFF 以外の設定にすると、White Clip R/G/B の調整は Line のときは、ボ OFF のときは、ボ 無効になります。 タンは暗く表示さ タンは暗く表示さ Black Clip れ、選択できませ れ、選択できませ...
Page 14
Adjust Color Correct RGB1 White Clip R (続き) (続き) (続き) (続き) R チャンネルのホワイトクリップの調整を制御し ます。 OFF:R チャンネルのホワイトクリップ調整不 可能となります。 ON:R チャンネルのホワイトクリップ調整可能 となります。 ご注意 Gamma の設定が ON で、かつ White Clip の 設定が OFF のときのみ働きます。 White Clip G G チャンネルのホワイトクリップの調整を制御 します。 OFF:G チャンネルのホワイトクリップ調整不 可能となります。 ON:G チャンネルのホワイトクリップ調整可能...
Page 15
Adjust Color Correct RGB1 White Clip B (続き) (続き) (続き) (続き) B チャンネルのホワイトクリップレベルを調整し ます。 設定範囲:93 ~ 107%(3.5%単位) 工場出荷時の設定:100% (ファンクションボタン5(シフト)を押して画 面を切り換えてください。 ) ご注意 Gamma の設定が ON で、かつ White Clip の 設定が OFF のときのみ働きます。 RGB2 Black Balance R R チャンネルのブラックバランスを調整します。 設定範囲:-10 ~+10%(0.5%単位) 工場出荷時の設定:0%...
Page 16
Adjust Color Correct Video Gain (続き) (続き) HUE モードでの調 ビデオゲインを調整します。 整を行います。 設定範囲:0 ~ 141%(0.1%単位) 工場出荷時の設定:100% ご注意 Chroma Gain Color Correct クロマゲインを調整します。 Mode の設定が HUE のときに選択 設定範囲:0 ~ 141%(0.1%単位) できます。 工場出荷時の設定:100% HUE を調整します。 設定範囲:-30°~+30°(0.1°単位) 工場出荷時の設定:0° Offset オフセットを調整します。 設定範囲:-10 ~+10%(0.5%単位) 工場出荷時の設定:0% YPbPr YPbPr Master Gain YPbPr モードでの...
YPbPr Master Gain 現在の設定値 Unit ID の調整値表示を押す。 100.0 141.0 バー 数字入力画面が表示されます。 v マーク SELECT Unit ID Menu 1 _ 254 Unit ID Unit Name SONY Group ID v マーク:Unity 位置(ユーザーデフォルト値を表示しま Next Record す。 ) Clear バー:Unity 値と現在の設定値が等しい場合、バーが黄色 になります。 Cancel Connect 数字入力画面を使う場合...
2. IP Address オプションメニューの設定 Group ID(設定範囲:1 ~ 63) 、Unit ID(設定範囲:1 セレクト L ボタン(Option)を押すと、Option Menu が ~ 254)を設定します。 表示されます。ここで設定した値は、電源を切っても保持 されます。 2. IP Address を選択する。 Option Menu ジョグ L、R ボタンを押して変更したい項目を決定す 1. Help 2. IP Address る。 3. Top Page 4. Menu Tree 5.
Page 22
設定した時間が保存されます。 4. Menu Tree 変更したくない場合は、セレクト L ボタン トップ画面に、最初のステージ(Slot/Convert/Setup/ (Cancel)を押します。 Adjust/Delay)のボタンを表示するかどうかを設定しま す。 6. Background 設定を On にすると、図のように画面の左側に選択ボタン 表示窓の背景色を設定します。 が表示されます。 ご注意 HKSP-313 HD COLOR CORRECTOR Version 1.xx Sync Phase Coarce Slot1 タスクバーは固定色となっているため、背景色を変えるこ -128 とはできません。 Slot Sync Phase Fine 1024 Convert Background Setup...
Page 28
English Table of Contents Overview ................29 Latest Version of the Operation Software .......29 Location and Function of Parts ......... 30 Menu ..................32 Menu Configuration ..............32 Functions of the Menu Items ...........35 Operations ................45 Starting and Terminating the Operation Software ....45 Selecting an Item to be Adjusted ..........45 Adjustment ................46 Setting the Unit ID ..............46...
Overview This operation software controls the HKSP-313 HD Color Corrector. It is installed on the UCP-8060 Universal Control Panel and controls multiple HKSP-313 units via the network. Latest Version of the Operation Software As for the latest version of the operation software, consult your Sony representative.
R button. Press to change the layer of the menu. e Title bar Shows the title of the displayed screen. f Status area Shows the current status such as the slot number where the HKSP-313 is installed, error messages, etc. Location and Function of Parts...
Page 31
k Function buttons These buttons are called function button 1, 2, … 5 from the top, and light in red, orange, or green according to the operation status. Function button 1 (lock): Turns on and off the lock function. When the button is lit in red, the lock function is set to ON, and when the button is not lit, the function is set to OFF.
Menu Menu Configuration The menu configuration of this software is as shown below. Slot Slot1 Slot2 Slot3 Slot4 Slot5 Slot6 Slot7 Slot8 Slot9 Slot10 Slot11 Slot12 Slot13 Slot14 Slot15 Slot16 Slot17 Unit ID Convert Motion Select Line Convert 80P/35P 80C/35C MODE Line 720p...
Page 33
Setup Meta Data ARIB Tx UMID Line 9 Line 10 Line 11 Line 12 Line 13 Line 14 Line 15 Line 16 Line 17 Line 18 Line 19 Line 20 Rx UMID Line 9 Line 10 Line 11 Line 12 Line 13 Line 14 Line 15...
Page 34
Adjust Color Correct CLIP White Clip Black Clip White Clip Black Clip RGB1 RGB Master Gain R Gain G Gain B Gain Offset White Clip R White Clip G White Clip B White Clip R White Clip G White Clip B RGB2 Black Balance R Black Balance G...
Select the slot number Note where the HKSP-313 to When the PFV-SP3300 is connected, the slot number (Slot1 to Slot17) appears, and when the be controlled is PFV-SP3100 is connected, the slot number (Slot1 to Slot4) appears.
Page 36
Meta Data ARIB Setup Setting for inserting the Controls the ARIB transmission function. Settings for the system Meta data OFF: ARIB data transmission is disabled. ON: ARIB data transmission is enabled. Notes • If setting for Format is other than 59.94i/60i/59.94P/60P, the button is dimmed and cannot be selected.
Page 37
Setup Recall/Store Store (continued) Managing the default Stores the default values set by the user. User Save: The current setting values are stored as the user default values. values. Recall Retrieves the default values. Factory: The default values set at the factory are retrieved. User: The default values set by the user are retrieved.
Page 38
Color Correct CLIP White Clip Adjust Adjusts the color Adjusts the clipping. Controls the white clip adjustment. Adjusts the output correct function. OFF: The white clip adjustment is disabled. Note video signal. ON: The white clip adjustment is enabled. If Color Correct Note If MODE is set to Line, Mode is set to OFF,...
Page 39
Adjust Color Correct RGB1 White Clip R (continued) (continued) (continued) (conti Controls the white clip for the R- nued) channel. OFF: The white clip adjustment for the R-channel is disabled. ON: The white clip adjustment for the R-channel is enabled. Note This is enabled only when Gamma is set to ON and White Clip is set to...
Page 40
Adjust Color Correct RGB1 White Clip G (continued) (continued) (continued) (conti Adjusts the white clip level for the G- nued) channel. Adjustable range: 93 to 107% in 3.5% steps Factory setting: 100% (Change the display by pressing Function 5 button (Shift).) Note This is enabled only when Gamma is set to ON and White Clip is set to...
Page 41
Adjust Color Correct RGB2 Gamma Balance R (continued) (continued) (continued) (conti Adjusts the gamma balance for the R- nued) channel. Adjustable range: 0.38 to 0.52 in 0.01 steps Factory setting: 0.45 Note This is enabled only when Gamma is set to ON. Gamma Balance G Adjusts the gamma balance for the G- channel.
Page 42
Adjust Color Correct Video Gain (continued) (continued) Adjusts in HUE Adjusts the video gain. mode. Adjustable range: 0 to 141% in 0.1% steps Factory setting: 100% Note If Color Correct Chroma Gain Mode is set to HUE, Adjusts the chroma gain. this is enabled.
Page 43
Adjust Enhancer Enhancer (continued) Adjusts the enhancer. Controls the detail adjustment. OFF: The detail adjustment is disabled. ON: The detail adjustment is enabled. Detail Gain Adjusts the detail gain. Adjustable range: 0 to 127 Factory setting: 64 Limiter Adjusts the clipping level against the detail signal level. Adjustable range: 0 to 63 Factory setting: 32 Crisp...
Page 44
Audio Delay Audio Delay Delay Controls the audio Controls the audio delay. Adjusts the delay. delay. OFF: The audio signal is delayed by synchronizing with the video system delay. ON: The adjustment of the audio signal delay is enabled. Audio Sample Adjusts the audio delay.
Push the jog roller or the select R button (Launch). The selected operation software is activated. For example to adjust MODE, follow the procedures below. HKSP-313 HD COLOR CORRECTOR Version 1.xx Slot1 Sync Phase Coarce Press the MODE button. -128...
100.0 The numeric keypad appears. 141.0 SELECT Unit ID Menu 1 _ 254 Unit ID Unit Name SONY v mark Group ID Next Record v mark: Unity position (shows the user default value) Clear Bar: The bar appears in yellow when the Unity value and the current setting are the same.
Press the jog L or R button to select an item to be Setting the Option Menu changed. If you press the select L button (Option) on the display, Turn the jog roller to change the setting. the Option Menu appears. The settings made on this menu are retained even if the power is turned off.
Page 48
Convert/Setup/Adjust/Delay) or not. When set to On, the buttons appear on the left of the display as shown below. Note The color of the task bar is fixed. You cannot change the HKSP-313 HD COLOR CORRECTOR Version 1.xx background color. Slot1 Sync Phase Coarce...
The selection in step 2 is stored. Data If you do not change the settings, press the select L The current settings of the HKSP-313 can be stored in a button (Cancel). Memory Stick as a file, and also the data stored in the Memory Stick can be read and used by the HKSP-313.
Page 50
SCC, appear. Turn the jog roller to highlight the filename to be set Modify the filename using the keyboard on the on the HKSP-313, then press the select L button display. (Select). Press the select R button (OK).
For details on the error and warning codes, refer to “6-1. Error/Warning Code List” in the Installation Manual for the HKSP-313. When you press the select L button (Back) or touch the status area, the display of the error or warning code is terminated, and the operation display appears.
Available types of “Memory Stick” Using a “Memory Stick” You can use various of “Memory Stick,” “Memory Stick” and “MagicGate Memory Stick” with your product. However, because your product does not support the MagicGate standards, data recorded with your product is About a “Memory Stick”...
Page 53
• To prevent data loss, make backups of data frequently. while it is reading or writing data. In no event will Sony be liable for any loss of data. – You use the “Memory Stick” in a location subject to •...
Page 54
従って、当社の許可なしに無断で複写したり、説明内容 ( 操作、保 守等 ) と異なる目的で本マニュアルを使用することを禁止します。 The material contained in this manual consists of information that is the property of Sony Corporation and is intended solely for use by the purchasers of the equipment described in this manual. Sony Corporation expressly prohibits the duplication of any...