Table of Contents
Quick Links
HD UP CONVERTER BOARD
HKSP-1125
! WARNING
This manual is intended for qualified service personnel only.
To reduce the risk of electric shock, fire or injury, do not perform any servicing other than that
contained in the operating instructions unless you are qualified to do so. Refer all servicing to
qualified service personnel.
! WARNUNG
Die Anleitung ist nur für qualifiziertes Fachpersonal bestimmt.
Alle Wartungsarbeiten dürfen nur von qualifiziertem Fachpersonal ausgeführt werden. Um die
Gefahr eines elektrischen Schlages, Feuergefahr und Verletzungen zu vermeiden, sind bei
Wartungsarbeiten strikt die Angaben in der Anleitung zu befolgen. Andere als die angegeben
Wartungsarbeiten dürfen nur von Personen ausgeführt werden, die eine spezielle Befähigung
dazu besitzen.
! AVERTISSEMENT
Ce manual est destiné uniquement aux personnes compétentes en charge de l'entretien. Afin
de réduire les risques de décharge électrique, d'incendie ou de blessure n'effectuer que les
réparations indiquées dans le mode d'emploi à moins d'être qualifié pour en effectuer d'autres.
Pour toute réparation faire appel à une personne compétente uniquement.
INSTALLATION MANUAL
1st Edition (Revised 1)
Serial No. 10001 and Higher
Table of Contents
Related Manuals for Sony HKSP-1125
Summary of Contents for Sony HKSP-1125
- Page 1 HD UP CONVERTER BOARD HKSP-1125 ! WARNING This manual is intended for qualified service personnel only. To reduce the risk of electric shock, fire or injury, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. Refer all servicing to qualified service personnel.
-
Page 3: Purpose Of This Manual
Attaching HKSP-1125 available for the HKSP-1125. . Maintenance Manual (Available on request) The HKSP-1125 is designed to be installed and operated in This manual describes the information that premises the the signal processing unit PFV-SP series. parts level service (adjustment, parts list, diagrams, etc.). -
Page 4: Operation Panel
AUDIO IN EXIT REMOTE (RS-422) PUSH HKSP-1125 1 SDI IN (SDTV serial digital video signal input) connector (BNC-type) This connector inputs a SDTV serial digital video signals of D1 SDI (525/625) and D2 SDI (525). 2 VIDEO IN (NTSC analog video signal input) connector (BNC-type) This connector inputs an analog NTSC video signal. - Page 5 Other mode is selected. D2 SDI Lights in green: A D2 SDI input mode is selected. (LED-393A board) Off: Other mode is selected. ANALOG Lights in green: An ANALOG input mode is selected. (LED-393A board) Off: Other mode is selected. 3 (E) HKSP-1125...
- Page 6 Status out select switch 1-8 (\ ON) For details about this switch, refer to Section 5-2. S601 TEST Test switch 1-8 (\ OFF) Factory use only. S1900 NORM/DOWN CPU program rewrite switch (\ NORM) Do not use during normal operation. 4 (E) HKSP-1125...
-
Page 7: Operating Function
4. Operating Function The HD up converter board HKSP-1125 converts the standard TV signal (SDI) to high definition TV signal (HD SDI), and has an additional function required for conversion. Input/Output . Input signal can be selected from the following four video signals. - Page 8 The aspect ratio of the output video signal can be selected from Edge crop, Letter Box, or Squeeze. The position can be adjusted in each aspect ratio. Color Corrector Function The color corrector function can be selected from YPbPr, HUE, or RGB, and the white clip and black clip adjustments can also be performed. 6 (E) HKSP-1125...
- Page 9 . Enables the layout and super-impose of the intake picture into back. Ancillary Data Multiplexing Multiplexes the auxiliary data such as VITC, digital super imposed data, and so on to HD SDI signal. Audio Audio signal can be delayed up to 2 Frames, and corresponds to 8 channels. 7 (E) HKSP-1125...
-
Page 10: Operation
The system automatically returns to the HOME menu AUDIO IN ANALOG Upper display mode when, in the input mode, the state of no operation EXIT continues over a fixed period of time (about 5 minutes). EXIT key Lower display PUSH Dial HKSP-1125 8 (E) HKSP-1125... -
Page 11: Menu Configuration
5. Turn the dial to counterclockwise to display “90 %”. The video gain is set to 90 %. 6. Press the dial once to turn the system into the higher hierarchy by one. 7. Press the EXIT key twice to return the HOME menu. 9 (E) HKSP-1125... - Page 12 [HARD] [G-G] : Hardware version display : G gain adjustment [B-G] : Error code display : B gain adjustment [WCL] : Warning code display Y/R/H : White clip level setting [BCL] Y/R/H : Black clip level setting 10 (E) HKSP-1125...
- Page 13 O X X X : Adjustment of grade of 1000 X O X X : Adjustment of grade of 100 X XO X : Adjustment of grade of 10 X X XO : Adjustment of grade of 1 11 (E) HKSP-1125...
-
Page 14: System Menu
XXXO: The grade of 1 blinks. Set the value from 0 to 9 by turning the dial, and press the dial to determi nation. DL2F 2 frames delay (Adds 1 frame to the normal delay amount of video and audio.) \ OFF: No change ON: 2 frames delay 12 (E) HKSP-1125... - Page 15 O D1 Back-color Back-color Y Level O D1 Back-color Pb Level O D1 Back-color Pr Level O D1 Back-color Left Position Back-color Right Position Gamma Correction O Enhancer Enhancer O Enhancer Sync Phase O HD Audio Delay 13 (E) HKSP-1125...
- Page 16 Item Description The HKSP-1125 operates as the following GPI specifications. . Pin assignment Control 3 pin LOW = REMOTE HIGH = LOCAL (When LOCAL is selected, following pins cannot be controlled by GPI too.) 5 pin LOW = SQUEEZE HIGH = Follows the setting of 8 pin.
- Page 17 When two or more warnings occur, a warning code is switched at intervals of 1 second, and is displayed. When there is no warning, - - - - is displayed. For details of the warning code, refer to Section “6-1-2 Warning”. 15 (E) HKSP-1125...
-
Page 18: Operation Menu
The variable can be performed in the unit of one line. When the setting is set to maximum value, the picture is positioned to the lower most position, and set to minimum value, the picture is positioned to the upper most position. 16 (E) HKSP-1125... - Page 19 WCL: Sets the white clip level. Factory setting: OFF Setting range: 93 % to 108 % (in units of 1 %) BCL: Sets the black clip level. Factory setting: OFF Setting range: _6 % to +7 % (in units of 1 %) 17 (E) HKSP-1125...
- Page 20 0.38 to 0.52 (in units of 0.01) \ OFF: Sets the gamma correction function to OFF. The specifications of both Inv- γ and γ conform to ITU-R BT.709 standard, and the default setting of the γ is ITU-RBT.709. 18 (E) HKSP-1125...
- Page 21 XXXO: The grade of 1 blinks, and sets the value in the range of 0 to 9. Press the dial to determine the value. Shifts the grade of 10 by pressing the EXIT key. (Variable range: 61 to 4095 samples) 19 (E) HKSP-1125...
- Page 22 No signal input Outputs a warning when no video or audio signal input. All switches are set to ON at the factory shipping state. Therefore, if you want to disable the error/ warning output, turn OFF the corresponding switch. 20 (E) HKSP-1125...
- Page 23 2-01 No SD video input signal exists. 2-02 The format of SD video input signal does not match with the setting of format. 2-03 A SD video input signal is abnormal. 2-04 Audio signal input is abnormal. 21 (E) HKSP-1125...
- Page 24 COPRO2 system control defect E-07 TG system control defect E-08 Video input presence or absence check E-09 VSP input data is abnormal. E-10 VFS input data is abnormal. E-11 COPRO2 input data is abnormal. E-12 TG defect 22 (E) HKSP-1125...
-
Page 25: Specifications
NTSC analog video signal (Conforms to SMPTE-170M.) 1.0 V p-p ± 10 % Level Input impedance 75 Z, unbalanced REMOTE IN (D-sub 9 Pin, Female) (1) Remote controller signal Connectable remote controller HD digital video controller HKDV-900 23 (E) HKSP-1125... - Page 26 The material contained in this manual consists of information that is the property of Sony Corporation. Sony Corporation expressly prohibits the duplication of any portion of this manual or the use thereof for any purpose other than the operation or maintenance of the equipment described in this manual without the express written permission of Sony Corporation.