Table of Contents
Basic settings
Basic settings
You can configure the appliance to meet your needs.
Basic settings
Overview of basic settings
The basic settings depend on the features of your appliance.
Basic setting
Water hardness
Rinse aid disp.
Extra Dry
Factory setting
1
Factory setting (may vary according to model)
Setting Extra Dry
Press
.
1.
To open the appliance settings,
2.
press
is flashing on the display.
a
Press
3.
and
flash in the display.
Press
repeatedly until the
4.
LEDs show the right value.
If "LED A" → Page 15 is not lit, Ex-
tra Dry is switched off.
Selection
Scale with 4 levels
Scale with 4 levels
On
1
Off
Reset
for 3 seconds.
repeatedly until
Description
Set the water hardness.
→ "Setting the water softening
system", Page 21
Set the amount of rinse aid to
be dispensed or switch off.
→ "Setting the amount of rinse
aid", Page 23
Switch Extra Dry on or off for
each operation.
For a better drying result the
temperature in the final rinse is
increased. This may increase
the running time slightly.
Note: Please take care with del-
icate tableware.
→ "Setting Extra Dry",
Page 31
Restore changed settings to the
factory settings.
The settings for initial start-up
must be configured.
→ "Restoring factory settings",
Page 31
If "LED A" → Page 15 is lit, Extra
Dry is switched on.
To save the settings, press
5.
for 3 seconds.
Restoring factory settings
Press
.
1.
To open the appliance settings,
2.
press
is flashing on the display.
a
Basic settings en
for 3 seconds.
31
Table of Contents
