Table of Contents
Available languages
Available languages
INSTALLATION INSTRUCTIONS
INSTALL THE REFRIGERANT PIPE
(the unit with the quick connectors)
NOTE: All the illustrations in this manual are for explanation purpose
only. Your air conditioner may be slightly different. The actual
shape shall prevail. They are subject to change without notice for
future improvement.
Connecting the Refrigerant Pipe to Indoor Unit
• Do not remove the plastic seals from the
indoor equipment and the appropriate
refrigerant pipe until immediately before you
connect them.
• Align the refrigerant pipes correctly, make
sure the dimensions of the connecting the
refrigerant pipe are the same. Place the screw
connector on the refrigerant pipes just on
to the thread on the indoor equipment and
tighten the first few threads by hand. See Fig. 1.
CAUTION – Before you continue, it is
• Hold the points marked "
ended spanner and turn the nuts only at the
points marked "
spanner (Select the appropriate spanner
according to the dimensions of the connector).
See Fig.2.
• Ensure that the screw connectors do not skew
as you tighten them and work quickly.
CAUTION – Since the coupling works with
• After finishing the connection, use the tape to
wrap the refrigerant pipe and connecting cable together. See Fig.3.
Page 28
Quick Connectors
essential that read the following
instructions carefully.
" using an open-
" using an open-ended
tapping rings, it may leak if you
undo and reconnect the pipes.
This will also void the warranty.
Sound
Deadening Pads
(Not included)
Chapters
Table of Contents
