Interfaces And Operator Controls For Devices With 24 V Dc Power Supply - Siemens SIMATIC IPC477D Operating Instructions Manual
Hide thumbs
Also See for SIMATIC IPC477D:
- Operating manual (54 pages) ,
- Operating instructions manual (292 pages) ,
- Quick install manual (2 pages)
Table of Contents
1.2.6
Interfaces and operator controls for devices with 24 V DC power supply
The figures showing the interfaces apply to the following devices:
● IPC477D with 12" display
● IPC477D with 15" display
● IPC477D with 19" display
● IPC477D with 22" display
Devices with PROFIBUS interface
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
Devices with PROFINET interfaces
The unnamed interfaces in the following figure are identical to those on the PROFIBUS
device.
①
SIMATIC IPC477D, IPC477D PRO
Operating Instructions, 07/2015, A5E31347228-AD
On/Off switch
24 V DC power supply
Protective conductor connection
Slot for external CFast card
4 x USB port
Display port
DVI-I port
2 x Ethernet port
COM 1 port
COM 2 port
PROFIBUS DP/MPI interface
3 x PROFINET interfaces
With cover
USB 3.0 high speed/high current
DVI connector for CRT or LCD monitor (VGA via DVI-
VGA adapter) with DVI interface
RJ45 Ethernet connection 1 for 10/100/1000 Mbps or
RJ45 Ethernet connection 2 for 10/100/1000 Mbps (not
for PROFINET device)
Serial interface, 9-pin D-sub plug
Serial interface, 9-pin D-sub plug
PROFIBUS DP/MPI interface RS 485, isolated, 9-pin D-
sub socket
CP-1616 onboard ports via RJ45 socket
Overview
1.2 Design of the built-in units
21
Table of Contents
