Operation - Honeywell HPA030 Series Owner's Manual

INSTALLING CERTIFIED HEPA FILTERS AND ODOR REDUCING PRE-FILTER

The Certified HEPA Filters and Odor Reducing Pre-Filter are supplied with

your air purifier. They are wrapped to ensure purity and are labeled to help

identify the proper replacement filter. (Type

Type

Odor Reducing Pre-Filter)

A

Pre-Filter

• Turn off and unplug the air purifier. While pressing the notch at the top of

the rear grille, pull the grille towards you and remove it (See Fig. 2). Gently

push along the edge of the filter frame and pull forward. If replacing used

filters, you may pull the red tabs to remove the filter. Repeat for the second

filter.

• Remove protective wrap from the filters, including the pre-filter.

• Place the Certified HEPA Filters back into the air purifier housing with the

red tabs accessible for removal.

• Secure the Odor Reducing Pre-Filter under the tabs on the rear grille.

• Re-install the rear grille by inserting the lower tab into tab slot at the bottom of the air purifier. Push the top of

grille into place until you hear an audible "click."

• Ensure the air purifier is plugged into a working

electrical outlet.

• Press the power button (

high speed (Fig. 3).

• Press the power button again to select a different

cleaning level. An LED will illuminate to indicate which

cleaning level you have selected.

(III = High, II = Medium, I = Low)

Portable air purifiers are more effective in rooms

where all doors and windows are closed. It is recommended

that you run your air purifier while you are at home to help

clean the air.

Certified HEPA Filter;

G

Filter

) once. The unit will start at

The energy efficiency of this ENERGY

STAR certified model is measured

based on a ratio between the model's

CADR for Smoke and the electrical

energy it consumes, or CADR/Watt.

Fig. 3

4

Fig. 2