5.3.10. Fit the balance shaft chain lower guide rail, ensuring that the
coloured link of the balance shaft chain is aligned with the
mark of the crankshaft sprocket. Fit the upper chain guide rail
followed by the tensioner rail. Tighten the tensioner rail and
guide rail retaining bolts to 20Nm.
5.3.11. Ensure that the threads of the balance shaft chain tensioner
are clean and dry. Apply VW specification locking fluid to the
thread balance shaft chain tensioner.
5.3.12. Refit the chain tensioner, tightening to 65Nm.
5.3.13. Refer to section 5.2. "Engine Timing – Adjustment" for
instructions on refitting the engine timing chain.
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable)
into approved containers and dispose of the product and the fluids according to local regulations.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
© Jack Sealey Limited
Environmental Protection
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
www.sealey.co.uk
01284 757500
01284 703534
VS5125
Issue: 3 - 22/03/17
