Sony CFD-E90L Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. CD Player
  5. CFD-E90L
  6. Service manual

Sony CFD-E90L Service Manual

Hide thumbs Also See for CFD-E90L:
Table of Contents

Quick Links

SERVICE MANUAL
Ver 1.0 2004.02
CD player section
System
Compact disc digital audio system
Laser diode properties
Material: GaAlAs
Wave length: 780 nm
Emission duration: Continuous
Laser output: Less than 44.6 µW
(This output is the value measured at a distance of about
200 mm from the objective lens surface on the optical
pick-up block with 7 mm aperture.)
Spindle speed
200 r/min (rpm) to 500 r/min (rpm) (CLV)
Number of channels
2
Frequency response
20 - 20 000 Hz
Wow and flutter
Below measurable limit
Radio section
Frequency range
FM
87.5 - 108 MHz
MW
531 - 1 611 kHz (9 kHz step)
530 - 1 610 kHz (10 kHz step)
LW
153 - 279 kHz
IF
FM: 10.7 MHz
MW/LW: 450 kHz
Aerials
FM: Telescopic aerial
MW/LW: Built-in ferrite bar aerial
Sony Corporation
9-877-528-01
2004B05-1
Personal Audio Company
C 2004.02
Published by Sony Engineering Corporation
Model Name Using Similar Mechanism
CD
CD Mechanism Type
Section
Optical Pick-up Name
Model Name Using Similar Mechanism
TAPE
Section
Tape Transport Mechanism Type
SPECIFICATIONS
Cassette-corder section
Recording system
4-track 2 channel stereo
Fast winding time
Approx. 110 sec. with Sony cassette C-60
Frequency response
TYPE I (normal): 50 - 15 000 Hz
General
Speaker
in.) dia., 4 Ω, cone type (2)
Full range: 8 cm (3
1
⁄
4
Outputs
Headphones jack (stereo minijack)
For 16 - 68 Ω impedance headphones
Maximum power output
4 W
Power requirements
For CD radio cassette-corder:
230 V AC, 50 Hz
9 V DC, 6 R14 (size C) batteries
For memory back-up:
4.5 V DC, 3 R6 (size AA) batteries
For remote control:
3 V DC, 2 R03 (size AAA) batteries
Power consumption
AC 14 W
CD RADIO CASSETTE-CORDER
CFD-E90L
Battery life
For CD radio cassette-corder:
FM recording
Sony R14P: approx. 13.5 h
Sony alkaline LR14: approx. 20 h
Tape playback
Sony R14P: approx. 7.5 h
Sony alkaline LR14: approx. 15 h
CD playback
Sony R14P: approx. 2.5 h
Sony alkaline LR14: approx. 7 h
Dimensions
Approx. 272 × 164 × 285 mm (w/h/d)
× 6
× 11
(10
3
⁄
1
⁄
1
⁄
inches) (incl. projecting parts)
4
2
4
Mass
Approx. 3 kg (6 lb. 10 oz) (incl. batteries)
Supplied accessories
Mains lead (1)
Remote control (1)
Design and specifications are subject to change without
notice.
AEP Model
UK Model
CFD-E95L
KSM-213RDP
KSS-213R
CFD-E95L
MF-E95
Table of Contents
loading

Related Manuals for Sony CFD-E90L

Summary of Contents for Sony CFD-E90L

  • Page 1 FM recording Laser diode properties Fast winding time Sony R14P: approx. 13.5 h Material: GaAlAs Approx. 110 sec. with Sony cassette C-60 Wave length: 780 nm Frequency response Sony alkaline LR14: approx. 20 h Emission duration: Continuous TYPE I (normal): 50 - 15 000 Hz Laser output: Less than 44.6 µW...
  • Page 2 This file was downloaded and provided FREE OF CHARGE from the ManualDirectory community. You can find many free to download Service Manuals & Schematics at http://www.manualdirectory.co.uk...

  • Page 3: Table Of Contents

    LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE ELECTRICAL PARTS LIST ......52 OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUB- LISHED BY SONY.

  • Page 4: Servicing Notes

    CFD-E90L SECTION 1 SERVICING NOTES CHUCK PLATE JIG ON REPAIRING NOTES ON HANDLING THE OPTICAL PICK-UP BLOCK OR BASE UNIT On repairing CD section, playing a disc without the CD lid, use Chuck Plate Jig. The laser diode in the optical pick-up block may suffer electro- •...

  • Page 5: General

    CFD-E90L SECTION 2 This section is extracted from instruction manual. GENERAL Basic Operations Playing a CD Use these buttons for additional operations 1, 2 ZPUSH OPEN/CLOSE VOLUME +, — Jog dial OPERATE (or POWER) Do this adjust the volume Press VOLUME +*, — (VOL +, —...
  • Page 6 CFD-E90L Playing a tape Use these buttons for additional operations OPERATE (or POWER) VOLUME +, – m, M Press adjust the volume VOLUME +*, — (VOL +, — on the remote) stop playback Connect the supplied mains lead. fast-forward or rewind the tape...
  • Page 7 CFD-E90L The Timer Setting the clock Press ENTER. The clock starts from 00 seconds. — —:— — indication appears in the display until you set the clock. CLOCK/SLEEP/TIMER The time display system: 24-hour system ENTER Jog dial Before you set the clock, connect the power source.

  • Page 8: Disassembly

    CFD-E90L SECTION 3 DISASSEMBLY • This set can be disassembled in the order shown below. 3-1. DISASSEMBLY FLOW 3-2. CABINET UPPER ASSY (page 7) 3-3. POWER 3-4. TUNER 3-8. CABINET 3-13. D-OUT 3-5. MAIN BOARD 3-12. CD LID BOARD BOARD...

  • Page 9: Power Board

    CFD-E90L 3-3. POWER BOARD 2 two screws 1 connector (2.6 × 10) (CNP901) 5 POWER board 4 connector (CNP322) 3-4. TUNER BOARD 5 screw (2.6 × 8) 2 three screws (2.6 × 8) 3 screw (2.6 × 10) 1 connector...

  • Page 10: Main Board

    CFD-E90L 3-5. MAIN BOARD 1 two flexible flat cables (CN802, 804) 1 flexible flat cable (CN310) 2 two connectors (CNP314, CN331) 3 three screws (2.6 × 8) 5 main board 4 screw (2.6 × 8) 1 flexible flat cable (CN803)

  • Page 11: Optical Pick-Up (Kss-213R)

    CFD-E90L 3-7. OPTICAL PICK-UP (KSS-213R) 1 two claws 3 CD cover 9 optical pick-up (KSS-213R) 2 two claws 7 flexible flat cable (16 core) 5 two screws (M2) 8 sled shaft 4 gear (A) 3-8. CABINET FRONT SECTION 1 four screws (2.6 ×...

  • Page 12: Tape Mechanism Deck (Mf-E95)

    CFD-E90L 3-9. TAPE MECHANISM DECK (MF-E95) 0 three buttons (MD) (FWD, play, REC) 9 three buttons (MD) (pause, stop/eject, REW) 6 panel section qa tape mechanism deck (MF-E95) 3 two screws (2.6) 4 two screws (2.6) 7 four screws (2.6 × 10) 1 Push the button (MD) (stop/eject).

  • Page 13: Main Belt (B), Sub Belt (B)

    CFD-E90L 3-11. MAIN BELT (B), SUB BELT (B) 8 main belt (B) 7 motor block 6 screw (2.6 × 4.5) 9 sub belt (B) 5 screw (2.6 × 4.5) 1 screw (2 × 4) tape mechanism deck 2 harness 3 Remove four solders.

  • Page 14: D-Out Assy

    CFD-E90L 3-13. D-OUT ASSY 4 connector 2 two screws (CN332) (2.6 × 10) 1 connector 5 D-out assy (CN311) 3-14. D-OUT BOARD 1 screw (2.6 × 8) 2 Tilt the board to the direction of the arrow A and remove the boss of the D-out assy, then remove the D-out board to the direction of the arrow B .

  • Page 15: Mechanical Adjustments

    CFD-E90L SECTION 4 SECTION 5 MECHANICAL ADJUSTMENTS ELECTRICAL ADJUSTMENTS PRECAUTION PRECAUTION 1. Clean the following parts with a denatured-alcohol-moistened 1. Setting swab : MEGABASS control : OFF record/playback head pinch roller erase head rubber belts TAPE DECK SECTION 0 dB=0.775 V...

  • Page 16: Tuner Section

    CFD-E90L 0 dB=1 µV AM IF ADJUSTMENT TUNER SECTION Adjust for a maximum reading on level meter [MW/LW] 450 kHz Setting: Function : RADIO MW VCO VOLTAGE CONFIRMATION BAND button : MW or LW Frequency Display Reading on Digital Voltmeter 0.9 ±...
  • Page 17 CFD-E90L Adjustment Location: – TUNER BOARD (Component Side) – T2 FM IF Adjustment LW VCO Voltage Adjustment T1 AM IF Adjustment FM VCO Voltage Adjustment FM Tracking Adjustment L3-1 MW Tracking Adjustment LW Tracking Adjustment L3-2 – TUNER BOARD (Conductor Side) –...

  • Page 18: Cd Section

    CFD-E90L CD SECTION CD section adjustments are done automatically in this set. In case of operation check, confirm that focus bias. Focus Bias Check 1. Connect the oscilloscope to TP (RF) and TP (GND) on the CD board. 2. Insert the disc (YEDS-18). (Part No. : 3-702-101-01) 3.
  • Page 19 CFD-E90L MEMO...

  • Page 20: Diagrams

    CFD-E90L SECTION 6 DIAGRAMS 6-1. BLOCK DIAGRAM – CD Section – OPTICAL PICK-UP BLOCK CD L-OUT LCHO INTERPOLATION (KSS-213R) SLICE ERROR MUTE DIGITAL FIN2 EFMIN (Page 21) LEVEL CORRECTION & FILTER CONTROL AUDIO CD ATTENUATION & RCHO R-CH DETECTOR DEEMPHASIS...

  • Page 21: Block Diagram - Tuner Section

    CFD-E90L 6-2. BLOCK DIAGRAM – TUNER Section – FM IFT FM IF ANT1 FM TELESCOPIC ANTENNA FM/AM RF AMP, MIX, OSC, FM/AM IF AMP, DET, MPX FM RF- L-OUT TU L-OUT IF-IN DET- MPX- MIX-OUT FM IF RF AMP MUTE...

  • Page 22: Block Diagram - Main Section

    CFD-E90L 6-3. BLOCK DIAGRAM – MAIN Section – INPUT SELECT, REC/PB PRE AMP CD L-OUT IC301 CD/LINE VREF SELECT (Page 19) POWER SWITCH MIC IN MUTE Q160, 161 IC304 L.CD R-CH ELECTRICAL VOLUME L.RAD MUTE IC302 STANDBY J301 SWITCH LINE IN...

  • Page 23: Block Diagram - Power Supply Section

    CFD-E90L 6-4. BLOCK DIAGRAM – POWER SUPPLY Section – LIQUID CRYSTAL DISPLAY LCD401 REMOTE CONTROL RECEIVER IC401 CD +6V SYSTEM CONTROLLER IC801 6V-CHK 41 (3/3) 3V-CHK 42 CD +3.3V CD +3.3V REGULATOR REGULATOR Q957 Q955 CD POWER ON/OFF CONTROL Q958, 959...

  • Page 24: Note For Printed Wiring Boards And Schematic Diagrams

    CFD-E90L 6-5. NOTE FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS • Circuit Boards Location (In addition to this, the necessary note is printed in each block) Note on Printed Wiring Boards: Note on Schematic Diagram: D-OUT board • All capacitors are in µF unless otherwise noted. pF: µµF •...

  • Page 25: Printed Wiring Board - Cd Section

    CFD-E90L 6-6. PRINTED WIRING BOARD – CD Section – • :Uses unleaded solder. See page 23 for Circuit Boards Location. CD BOARD R715 C727 R714 JW711 JW704 C735 JW705 JW703 C711 C709 JW732 FB701 C716 R732 R723 CNP703 R747 C717...

  • Page 26: Schematic Diagram - Cd Section

    CFD-E90L 6-7. SCHEMATIC DIAGRAM – CD Section – • See page 36 for Waveforms. • See page 36 for IC Block Diagrams. C726 1000p C725 1000p C724 C723 0.01 C722 C721 C720 S701 (LIMIT) C750 C746 C747 R724 C751 C742...

  • Page 27: Printed Wiring Board - Tuner Section

    CFD-E90L 6-8. PRINTED WIRING BOARD – TUNER Section – • :Uses unleaded solder. See page 23 for Circuit Boards Location. ANT1 FM TELESCOPIC TUNER BOARD ANNTENA L3 – 1 L3 – 2 MW FERRITE-ROD LW FERRITE-ROD ANTENNA ANTENNA –2 –1...
  • Page 28 CFD-E90L 6-9. SCHEMATIC DIAGRAM – TUNER Section – • • See page 36 for Waveform. See page 36 for IC Block Diagrams. 100p 220p 4.7k 220p MW/LW OSC 2SC4098 100p 0.47 1000p LW SWITCH KV1520NT 2SK514-F 100k 470k CONSTANT L3-1...

  • Page 29: Printed Wiring Board - Tape Deck Section

    CFD-E90L 6-10. PRINTED WIRING BOARD – TAPE DECK Section – 6-11. SCHEMATIC DIAGRAM – TAPE DECK Section – • See page 36 for Waveform. • See page 36 for IC Block Diagram. • :Uses unleaded solder. See page 23 for Circuit Boards Location.

  • Page 30: Printed Wiring Boards - Main Section

    CFD-E90L 6-12. PRINTED WIRING BOARDS – MAIN Section – • See page 23 for Circuit Boards Location. :Uses unleaded solder. • Semiconductor Location Ref. No. Location D322 CD BOARD TUNER BOARD TUNER BOARD POWER BOARD CNP702 CNP1 CNP1 KH311 D801...

  • Page 31: Schematic Diagram - Main Section (1/2)

    CFD-E90L 6-13. SCHEMATIC DIAGRAM – MAIN Section (1/2) – • See page 36 for IC Block Diagram. (1/2) C331 R145 R330 C332 1000 2.2k 0.01 R146 C134 220k C133 R126 C124 R143 0.022 100k R128 Q125 2SC4081-T106Q R125 R149 AF AMP 2.2k...

  • Page 32: Schematic Diagram - Main Section (2/2)

    CFD-E90L 6-14. SCHEMATIC DIAGRAM – MAIN Section (2/2) – • See page 36 for Waveforms. • See page 39 for IC Pin Function Description. (2/2) RESET SIGNAL GENERATOR IC802 BD4727G-TR R842 R843 CN802 R841 COM0 COM0 COM1 COM1 CN310 COM2...

  • Page 33: Printed Wiring Boards - Panel Section

    CFD-E90L 6-15. PRINTED WIRING BOARDS – PANEL Section – • :Uses unleaded solder. See page 23 for Circuit Boards Location. (Page 29) MAIN BOARD LCD BOARD CNP314 S403 D406 R404 CLOCK/SLEEP/ OPR/BATT R406 TIMER R425 R424 JC405 R402 R403 R407...

  • Page 34: Schematic Diagram - Panel Section

    CFD-E90L 6-16. SCHEMATIC DIAGRAM – PANEL Section – COM0 COM0 LCD401 COM1 COM1 LIQUID CRYSTAL DISPLAY COM2 COM2 COM3 COM3 SEG0 SEG0 SEG1 SEG1 SEG2 SEG2 SEG3 SEG3 SEG4 SEG4 SEG5 SEG5 SEG6 SEG6 RE401 SEG7 SEG7 ENCODER SEG8 SEG8...

  • Page 35: Printed Wiring Boards - Power Section

    CFD-E90L 6-17. PRINTED WIRING BOARDS – POWER Section – • :Uses unleaded solder. See page 23 for Circuit Boards Location. POWER BOARD RELAY BOARD HEADPHONE BOARD C129 KH311 JC301 C130 C230 R333 CN322 (R-CH) J321 MAIN C128 (PHONES) Q224 Q124...

  • Page 36: Schematic Diagram - Power Section

    CFD-E90L 6-18. SCHEMATIC DIAGRAM – POWER Section – R231 R131 4.7k 4.7k R232 C324 0.01 R132 J321 (PHONES) R324 2.2k POWER AMP IC304 D323 BA5417 1SS355TE-17 R323 KH324 C323 CN324 C128 1000p C131 CN325 C130 KH322 CN322 C228 1000 1000p...
  • Page 37 CFD-E90L • Waveforms • IC Block Diagrams – CD Board – – TUNER Board – – MAIN Board – – CD Board – 1 IC701 4 (RF) (CD Play mode) qa IC2 w; (XOUT) ea IC801 ua (XT2) IC701 LC78646E-E...
  • Page 38 CFD-E90L IC702 BA5826FP-E2 SP– D.BUFF SL– D.BUFF LEVEL D.BUFF SHIFT D.BUFF SPIN LEVEL SHIFT SLIN THERMAL SHUT-DOWN MONITOR (SLIN) REG–B VREF REGO MUTE (FIN) DRIVER MUTE (TIN) LEVEL LEVEL SHIFT D.BUFF SHIFT D.BUFF F– T– D.BUFF D.BUFF OPOUT OPIN – TUNER Board –...
  • Page 39 CFD-E90L IC2 LC72137M-TLM-E XOUT REFERENCE DIVIDER AOUT PHASE 12BITS DETECTOR PROGRAMMABLE CHARGE DIVIDER PUMP UNLOCK DETECTOR POWER ON RESET SWALLOW COUNTER FMIN 1/16,1/17 4BITS UNIVERSAL COUNTER AMIN IFIN – PRE Board – – MAIN Board – IC301 TA2068N IC302 PT2257-S...
  • Page 40 CFD-E90L • IC Pin Function Description MAIN BOARD IC801 µPD789478GC-A04-8BT (SYSTEM CONTROLLER) Pin No. Pin Name Description 1, 2 — Not used 3 to 5 VLC2 to VLC0 — Terminal for doubler circuit capacitor connection to develop liquid crystal display drive voltage...
  • Page 41 CFD-E90L Pin No. Pin Name Description Sub system clock input terminal (32.768 kHz) Sub system clock output terminal (32.768 kHz) — Power supply terminal (+3.3V) — Ground terminal Main system clock input terminal (4.19 MHz) Main system clock output terminal (4.19 MHz) System reset signal input “L”: reset...

  • Page 42: Exploded Views

    CFD-E90L SECTION 7 EXPLODED VIEWS NOTE: The components identified by mark • -XX and -X mean standardized parts, so they • Items marked “*” are not stocked since they 0 or dotted line with mark 0 are may have some difference from the original are seldom required for routine service.

  • Page 43: Cabinet Front Section

    CFD-E90L 7-2. CABINET FRONT SECTION MD block section panel section Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-263-837-51 LID, CASSETTE (SILVER) 3-263-775-51 WINDOW, LCD (BLUE) 3-263-837-61 LID, CASSETTE (BLUE) 4-951-620-01 SCREW (2.6X8), +BVTP 3-247-667-11 HOLDER, CASSETTE...

  • Page 44: Panel Section

    CFD-E90L 7-3. PANEL SECTION LCD board section Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-247-656-11 BUTTON (CENTER) 3-250-750-12 BUTTON (CD) (REW) (TUNE -) (DISPLAY. CLOCK./SLEEP/TIMER. ENTER) 3-250-749-12 BUTTON (CD) (FWD) (TUNE +) 3-263-963-01 BUTTON (L) 3-247-655-11 BUTTON (CD) (PLAY) (u) (LINE.

  • Page 45: Lcd Board Section

    CFD-E90L 7-4. LCD BOARD SECTION LCD401 not supplied board IC401 not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-247-675-01 PLATE, LIGHT GUIDE 3-254-939-01 SHEET (23 PIN FFC), PROTECTION 3-247-669-01 HOLDER, LCD 3-254-940-01 SHEET (6 PIN FFC), PROTECTION...

  • Page 46: Md Block Section

    CFD-E90L 7-5. MD BLOCK SECTION not supplied supplied tape mechanism deck section (MF-E95) Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-247-659-11 BUTTON (MD) (PASUE) (X) * 207 A-3683-864-A PRE BOARD, COMPLETE 3-247-663-11 BUTTON (MD) (STOP/EJECT) (x Z)

  • Page 47: Cabinet Upper Section

    CFD-E90L 7-6. CABINET UPPER SECTION S901 not supplied (HEADPHONE board) CD block section Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-951-620-01 SCREW (2.6X8), +BVTP 3-921-725-11 SCREW (2.6X10), +PWH * 252 A-4547-020-A MAIN BOARD, COMPLETE 3-250-766-01 CHASSIS (DIGITAL OUT) (BLUE)

  • Page 48: Cabinet Under Section

    CFD-E90L 7-7. CABINET UNDER SECTION J901 T901 speaker box section F901 POWER ANT1 board BATTERY (2) board BATTERY (3) board BATTERY (1) board The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified.

  • Page 49: Speaker Box Section

    CFD-E90L 7-8. SPEAKER BOX SECTION not supplied not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-247-672-01 BOX, SPEAKER 3-250-730-01 COVER (R), DUCT 4-951-620-01 SCREW (2.6X8), +BVTP 1-825-474-11 SPEAKER (8cm) (R) 3-250-729-01 COVER (L), DUCT...

  • Page 50: Cd Block Section

    CFD-E90L 7-9. CD BLOCK SECTION optical pick-up section (KSM-213RDP) not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-923-736-01 COVER, CD * 404 A-3347-785-A CD BOARD, COMPLETE 3-931-379-31 RUBBER, VIBRATION PROOF 3-931-379-21 RUBBER, VIBRATION PROOF...

  • Page 51: Optical Pick-Up Section (Ksm-213Rdp)

    CFD-E90L 7-10. OPTICAL PICK-UP SECTION (KSM-213RDP) supplied M702 The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Ref. No. Part No. Description Remark Ref. No. Part No.

  • Page 52: Tape Mechanism Deck Section (Mf-E95)

    CFD-E90L 7-11. TAPE MECHANISM DECK SECTION (MF-E95) not supplied M901 HRP301 not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-244-086-01 ARM, PINCH ROLLER 3-244-083-01 + SCREW BIND DT M2X6 3-244-079-01 BELT (B), SUB HRP301 3-244-085-01 HEAD, R/P (RECORD/PLAY BACK)

  • Page 53: Electrical Parts List

    CFD-E90L SECTION 8 ELECTRICAL PARTS LIST BATTERY (1) BATTERY (2) BATTERY (3) NOTE: • Due to standardization, replacements in the • Items marked “*” are not stocked since they The components identified by parts list may be different from the parts speci- are seldom required for routine service.
  • Page 54 CFD-E90L D-OUT HEADPHONE Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark JC702 1-216-864-11 SHORT CHIP < SWITCH > JC703 1-216-864-11 SHORT CHIP S701 1-571-936-11 SWITCH, LEAF (LIMIT) < COIL > < VIBRATOR > L706 1-414-445-11 FERRITE, EMI (SMD) (1608) X701 1-579-280-11 VIBRATOR, CRYSTAL (16.9344MHz)
  • Page 55 CFD-E90L MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-254-940-01 SHEET (6 PIN FFC), PROTECTION S407 1-786-050-21 SWITCH, KEY BOARD (MODE) < CAPACITOR > S408 1-786-050-21 SWITCH, KEY BOARD (VOLUME –) S409 1-786-050-21 SWITCH, KEY BOARD (x)
  • Page 56 CFD-E90L MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C808 1-162-927-11 CERAMIC CHIP 100PF < COIL > C809 1-162-927-11 CERAMIC CHIP 100PF C810 1-162-927-11 CERAMIC CHIP 100PF L801 1-414-137-31 INDUCTOR 0.22uH C811 1-162-927-11 CERAMIC CHIP...
  • Page 57 CFD-E90L MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R264 1-216-845-11 METAL CHIP 100K 1/10W R858 1-216-833-11 METAL CHIP 1/10W R265 1-216-841-11 METAL CHIP 1/10W R266 1-216-821-11 METAL CHIP 1/10W R859 1-216-833-11 METAL CHIP 1/10W...
  • Page 58 CFD-E90L POWER Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark A-3683-403-A POWER BOARD, COMPLETE IC910 6-703-285-01 IC S-812C33AUA-C2NT2G *********************** < JACK > 1-533-233-31 FUSE HOLDER 0 J901 7-685-645-79 SCREW +BVTP 3X6 TYPE2 N-S 1-526-838-11 INLET, AC 2P (AC IN) <...
  • Page 59 CFD-E90L RELAY TUNER Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C105 1-162-923-11 CERAMIC CHIP 47PF R210 1-216-025-11 RES-CHIP 1/10W R211 1-216-829-11 METAL CHIP 4.7K 1/10W C107 1-162-962-11 CERAMIC CHIP 470PF R212 1-216-827-11 METAL CHIP 3.3K...
  • Page 60 CFD-E90L TUNER Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 1-162-968-11 CERAMIC CHIP 0.0047uF 10% < DIODE > 1-104-665-11 ELECT 100uF 1-162-970-11 CERAMIC CHIP 0.01uF 8-719-078-48 DIODE KV1471ETR1-3 1-162-919-11 CERAMIC CHIP 22PF 8-719-078-48 DIODE KV1471ETR1-3 1-162-964-11 CERAMIC CHIP 0.001uF...
  • Page 61 CFD-E90L TUNER Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 1-216-835-11 METAL CHIP 1/10W 3-263-561-41 MANUAL, INSTRUCTION 1-216-827-11 METAL CHIP 3.3K 1/10W (FRENCH, GERMAN) (AEP) 1-216-845-11 METAL CHIP 100K 1/10W 3-263-561-51 MANUAL, INSTRUCTION 1-216-853-11 METAL CHIP...
  • Page 62 CFD-E90L MEMO...
  • Page 63 CFD-E90L REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper right on the revised page allows you to jump to the next revised page. Ver. Date Description of Revision...

Table of Contents