Table of Contents
Adjustment of the position and height of the washing cap
調整洗衣蓋的位置高度
In "Wool" process 『毛絨』程序時
• The installation position (height) of the basket shall be determined by the type, size, and thickness of the
washings. Please install the washing cap at a height where it could press against the washings slightly.
洗衣蓋的安裝位置 ( 高度 ) 應根據衣物的種類、大小、厚度而定，請將洗衣蓋安裝在可輕壓住衣物的高度。
• There is a sign of protrusion on the interior wall of the basket, indicating where the installation position shall
be, which can be used as reference at the time of installation.
洗衣槽內壁上有表示安裝位置的突起標誌，安裝時可供參考。
• For light and thin clothes such as blouse, towels can be put into the basket to adjust the height of the washings and avoid
oblique of the washing.
洗滌罩衫等輕薄衣物時，可在洗衣槽內放入毛巾等物，以調節衣物高度，避免脫水時衣物偏斜。
washing cap
In "Blanket" process 『被毯』程序時
Dismantlement of the detergent dispenser
1
洗衣粉加入盤的拆卸方法
1Bend the dispenser
彎折加入盤。
2Dismantle the pin from the pinhole.
將銷釘從銷孔中卸下來。
pin
pinhole
Washing waterline washing capacity
less than 1.2kg
35L
25L
1.2kg
2
Put the washing cap into the basket,
hold the central circle, and pull it
right beneath the balance ring.
把洗衣蓋放入洗衣槽內，握住中圈將其
拉到平衡環正下方。
• Do not clip the clothes when installing
the washing cap.
安裝洗衣蓋時，請勿夾住衣物。
washing cap
Attention
•
Do not add any clothes on the washing
cap after the installation of the cap.
洗衣蓋安裝完畢後，請不要在洗衣蓋上再
加入衣物。
balance ring
central circle
33
Hide quick links:
Table of Contents
