Table of Contents
Functional overview
SAS/SATA RAID controller
The server is available with the following SAS/SATA RAID controllers for
operating the internal SAS/SATA HDDs:
– Modular Host Bus Adapter with "Integrated RAID" (IR). RAID levels 0 and 1
are supported for internal HDD configurations.
– Modular RAID 0/1 controller with "MegaRAID functionality" (integrated
MegaRAID).
RAID levels 0, 1, 10, 5 and 50 are supported for internal HDD configurations.
– Modular RAID 5/6 controller with "MegaRAID functionality" (MegaRAID).
RAID levels 0, 1, 10, 5, 50, 6 and 60 are supported for internal HDD
configurations. As an option, a flash backup unit (FBU) can save the
memory content even if the power fails. Cache memory size of 1 GB or 2 GB
is available.
I
For more information on configuring the controller, see section
"Configuring the SAS/SATA RAID controller" on page
Further information on SAS/SATA RAID controllers is provided in the
"Modular RAID Controller Installation Guide" (on the Fujitsu manuals
server under x86 Servers - Expansion Cards - Storage Adapters - LSI SAS /
SCSI RAID Controllers).
Further information on other SAS/SATA RAID controllers (e.g. for
operating external SAS/SATA HDDs or tape drives) is available on the
Fujitsu manuals server under x86 Servers - Expansion Cards - Storage
Adapters - LSI SAS / SCSI RAID Controllers.
Optical disk drive (ODD)
An installation slot for an ultra slim ODD (optional) is available.
I
For the variant with 10x 2.5-inch HDDs there is no slot available for an
ultra slim ODD.
USB connectors
4x 3.5-inch HDDs and 8x 2.5-inch HDDs chassis: There are two USB 3.0
connectors on the front and two USB 3.0 connectors at the rear.
10x 2.5-inch HDDs chassis: On the front there is one USB 2.0 connector. At the
rear there are two USB 3.0 connectors.
The maximum length of the external cable are three meters.
16
Operating Manual
74.
RX2530 M4
Hide quick links:
Table of Contents
