Table of Contents
Extended parameters
Appendix 2 Extended parameters
Appendix 2-1 Used to display the extended parameters.
1.
Screen at powering on
The monitor display appears.
2.
Press
the PU operation mode.
3.
Press
setting mode.
4.
Turn
appears.
5.
Press
"
6.
Turn
"
".
7.
Press
After parameter setting is completed, press
press
perform the operation in above steps 3 to 7.
Error display?
If the operation panel does not have the write precedence
REMARKS
If the setting has not been changed, the value does not flicker and the next parameter number appears.
Pr. 160
9999
Only the simple mode parameters can be displayed.
(Initial Value)
0
Simple mode and extended mode parameters can be displayed.
1
Only the parameters registered in the user group can be displayed.
106
Operation
to choose
to choose the parameter
until
(Pr. 160)
to read the currently set value.
" (initial value) appears.
to change it to the set value
to set.
By turning
, you can read another parameter.
·
Press
to show the setting again.
·
Press
twice to show the next parameter.
·
twice to return to the monitor display. To change settings of other parameters,
Description
Display
PU indication is lit.
Flicker ··· Parameter setting complete!!
once to show the alarm history and
The parameter
number read
previously appears.
Table of Contents
