Using the “ spray ” ----------------------------------------------------------------------------11 How to care for and store your iron-------------------------------------------------11-14 Q&A---------------------------------------------------------------------------------------------14 Trouble shooting-----------------------------------------------------------------------------15 Specification-----------------------------------------------------------------------------------15 Thank you for purchasing this Panasonic product. Before operating this unit, please read these instructions completely and save them for future use.
Safety precautions Do not connect or disconnect the power plug to a household outlet with wet hands. To reduce the risk of injury, loss of life, electric shock, fire, and damage to equipment or property, always observe the Do not damage, modify, forcibly bend, pull, or following safety precautions.
Page 5
This appliance is not intended for use by persons WARNING (including children) with reduced physical, sensory or mental capabilities, or lack of The iron is not to be used if it has been dropped, experience and knowledge, unless they have and there are visible signs of damage or if it is been given supervision or instruction concerning leaking.
Page 6
CAUTION Only use tap water in the iron. Do not add perfume, vinegar, starch, descaling agents, ironing aids or other chemicals in the Do not touch the steam or power shot during " " water tank. use. - Doing so may it will cause scalds or getting dirty •...
CAUTION Parts identification To reduce the risk of personal injury, property damage, electric shock or fire, please observe the following: Low steam High steam Use a dry iron on moist clothing (spray misted). Disconnect the power plug by holding the wire instead of pulling on the power cord.
Before use How to use as an iron The temperature selector of the iron has words, dots and 1. Move the steam/dry selector to the dry position to steam symbols. avoid water leakage. The dots are symbols for 3 temperature ranges: •...
Page 9
3. Position the iron in the heel 7. After each use rest position and make sure Set the steam/dry selector to the ① the temperature selector is dry position. If the steam/dry selector set to " 0 ". is not in the dry position after using, remaining water will move into the soleplate and can result in burns when 4.
Guide for Steam/Dry selector Using the “power shot” The " power shot " feature provides extra steam which goes Steam/Dry Temperature Recommendations deep into the garment and is helpful for removing stubborn selector zone wrinkles. It is necessary to clean the inside of the iron before Choose using the "power shot"...
Using the vertical shot " " How to care for and store your iron To get better results 3-way cleaning when using vertical METHOD(1) Using the self-cleaning feature steam, hang the 1. Fill the water tank with tap water as described in the garment on a hanger.
Page 12
7. Once the water tank has been completely drained, hold the 6. Pump the power shot button quickly (at least 2 times per for approx. 30 times continuously. While pumping, iron horizontally over the sink. shake the iron back and forth. Or, stand the iron up on a stable surface and place an old towel or similar under the soleplate.
Page 13
How to care for your iron Anti-drip system (automatic water seal) Surface of the iron This model has an anti-drip system. When the temperature of • After unplugging and cooling the iron, simply wipe off with a the soleplate’s surface drops to low, the valve for the vaporizing damp cloth and if necessary, use a mild detergent.
Q&A Trouble shooting Question Answer Problem Causes, Solution Make sure the power plug is plugged into These sounds are made by No heating Why click sound or a household outlet. the internal parts of the iron, metallic sound be heard Fill the water tank with tap water up to spray mechanism, leakage while using or shaking the...