Table of Contents
Cleaning the air outlet
1. Insert the plug into a household outlet.
2. Set the power switch to [ Ⅰ Set],
[ Ⅱ Dry] or [ Ⅲ Turbo].
3. Select [COLD] with the mode
switching button.
4. While scraping dust and hair jammed in the
mesh with a cotton swab, blow them away
with a hair dryer.
Note
During maintenance, do not block the air inlet with your
hand.
Dust will disperse during or after cleaning. Make sure
there is no dust before using the unit.
(Do not look into the air outlet.)
At least once a month
nanoe™ outlet
Mineral Ion outlet
In order to maintain the generation amount of nanoe™
and mineral ions.
1. Prepare a commercially
available new cotton swab.
2. Gently insert the cotton
swab in the outlet until it
stops (about 10 mm), and
then turn the cotton swab
2-3 times carefully.
18
EH-NA9D 香港向v3.indb 18
nanoe™ outlet
Mineral anion outlet
Notice
It is recommended to use thin cotton swabs dedicated
for infants.
Clean the dirt if any in the following way
Cleaning the main body
Soak a cloth in the soapy water and
squeeze it out firmly, and then wipe the
main body with the cloth.
Notes
Do not use substances such as
alcohol, nail polish remover or
detergent (hand soap). Doing so may
result in malfunction or part cracks or
discoloration.
Do not store the unit with hairdressing
products or cosmetics on it. Doing
so may cause deterioration of the
plastic, leading to discoloration and
cracks.
nail
alcohol
polish
remover
2019/8/19 13:20:04
Chapters
Table of Contents
