Table of Contents
DIVAR IP all-in-one 7000 (2U)
3
System overview
DIVAR IP all-in-one 7000 is a simple and reliable all-in-one recording, viewing and management
solution for network surveillance systems.
Running the full BVMS solution and powered by Bosch Video Recording Manager (VRM)
software, DIVAR IP all-in-one 7000 is an intelligent IP storage device that eliminates the need
for separate Network Video Recorder server and storage hardware.
DIVAR IP all-in-one 7000 combines advanced management and state-of-the-art recording
management into a single cost-effective, plug and play IP recording appliance for IT-minded
customers which are seeking for a state-of-the-art "second generation" NVR recording
solution.
The DIVAR IP all-in-one 7000 appliances have following features:
Instant real time
access to video
Easy installation
Access to BVMS
3.1
Chassis components
This chapter describes the most common components included with your chassis. For more
information, see the installation instructions detailed later in this manual.
Component
Hard drives
DVD-ROM drive
Fans
Air shroud
Bosch Security Systems B.V.
You can view high quality HD and UHD video despite low or limited
bandwidth connections. Dynamic Transcoding technology ensures that
you can view your video immediately — anytime, anywhere.
The DIVAR IP all-in-one 7000 appliances have a wizard based set-up and
centralized configuration to reduce installation times. All components
are pre-installed and pre-configured - creating an out-of-the-box ready-to-
use video management appliance.
After starting the system, immediate access to the BVMS application is
offered by a customized user interface. The ability to use one central
user interface for configuration and operation management reduces
installation and training requirements, and helps to keep ongoing system
management costs low.
Description
The chassis includes 8 hard drive bays for SATA hard drives.
These hard drives are hot swappable. Once setup correctly, these drives
can be removed without turning off the system.
In addition, these drives support SES2 (SATA).
Note: For empty chassis, the hard drives must be purchased separately.
For the latest shipping lists, see the datasheet in the online product
catalog.
This drive allows you to quickly install or save data.
The system fans provide cooling for the chassis. These fans circulate air
through the chassis as a means of lowering the chassis internal
temperature.
The system fans are powered from the motherboard. The fans are 2U
high.
Air shrouds are shields, usually plastic, which conduct the airflow
directly to where it is needed to maximize fan efficiency. Always use the
air shroud included with your chassis.
Installation manual
System overview | en
13
2019.08 | V1 | DOC
Table of Contents
