Remote connection to the system Protecting the system from unauthorized access Setting up port forwarding Choosing an appropriate client 6.3.1 Remote connection with Operator Client 6.3.2 Remote connection with Video Security App Bosch Security Systems B.V. Installation manual 2019.08 | V1 | DOC...
Page 4
Replacing a system fan 9.14 Replacing the power supply 9.15 Replacing the power distributor 9.16 Monitoring the system 9.17 Recovering the unit 9.18 Service and repair Additional documentation and client software 2019.08 | V1 | DOC Installation manual Bosch Security Systems B.V.
The Low Voltage power supply unit must comply with EN/UL 60950. The power supply must be a SELV-LPS unit or a SELV - Class 2 unit (Safety Extra Low Voltage - Limited Power Source). Bosch Security Systems B.V. Installation manual 2019.08 | V1 | DOC...
Page 6
Clean only with a dry cloth. Do not use liquid cleaners or aerosol cleaners. – Do not install device near any heat sources such as radiators, heaters, stoves, or other equipment (including amplifiers) that produce heat. 2019.08 | V1 | DOC Installation manual Bosch Security Systems B.V.
Page 7
16 A. This must be in accordance with NEC800 (CEC Section 60). – Disconnect the power before moving the unit. Move the unit with care. Excessive force or shock may damage the unit and the hard disk drives. Bosch Security Systems B.V. Installation manual 2019.08 | V1 | DOC...
SELV circuits. – If safe operation of the unit cannot be ensured, remove it from service and secure it to prevent unauthorized operation. In such cases, have the unit checked by Bosch Security Systems. –...
Notice! This is a class A product. In a domestic environment this product may cause radio interference, in which case the user may be required to take adequate measures. Bosch Security Systems B.V. Installation manual 2019.08 | V1 | DOC...
DIVAR IP all-in-one 7000 (2U) Notice! Video loss is inherent to digital video recording; therefore, Bosch Security Systems cannot be held liable for any damage that results from missing video information. To minimize the risk of losing information, we recommend multiple, redundant recording systems, and a procedure to back up all analog and digital information.
OS security updates. – Limiting local network access to trusted devices is strongly suggested. Details are described in the Technical note Network Authentication 802.1X and in the Bosch IP Video and Data Security Guidebook, available in the online product catalog. –...
This manual is written for professional system integrators and PC technicians. It provides information for the installation and use of the chassis. Installation and maintenance should be performed by experienced and qualified technicians only. 2019.08 | V1 | DOC Installation manual Bosch Security Systems B.V.
DIVAR IP all-in-one 7000 is a simple and reliable all-in-one recording, viewing and management solution for network surveillance systems. Running the full BVMS solution and powered by Bosch Video Recording Manager (VRM) software, DIVAR IP all-in-one 7000 is an intelligent IP storage device that eliminates the need for separate Network Video Recorder server and storage hardware.
LEDs. On the rear there are various I/O ports as well as power supply modules. Front view: 2x USB 2.0 ports Power failure Information LED NIC1/NIC2 HDD (drive activity) Power Reset Power on/off Drive carrier LEDs (green: access to this drive/red: drive failure) 2019.08 | V1 | DOC Installation manual Bosch Security Systems B.V.
Note: Turning off system power with this button removes the main power, Power but keeps standby power supplied to the system. To remove all power, unplug the system before performing maintenance tasks. Bosch Security Systems B.V. Installation manual 2019.08 | V1 | DOC...
Hard drive carrier LEDs The chassis supports hot-swappable SAS/SATA hard drives in hard drive carriers. Each hard drive carrier features two status LEDs on the front of the carrier. 2019.08 | V1 | DOC Installation manual Bosch Security Systems B.V.
Page 17
DIVAR IP all-in-one 7000 (2U) System overview | en LED color LED state Description Green Drive activity Blinking Drive is being accessed. Drive failure Bosch Security Systems B.V. Installation manual 2019.08 | V1 | DOC...
If the chassis itself shows damage, file a damage claim with the carrier who delivered it and notify the respective Bosch RMA desk. Due to the weight of the system: After opening the top of the shipping box, one person should stand at either end and lift the disk array out together.
Also refer to the installation instructions that came with the rack unit you are using. Notice! This rail will fit a rack between 26" and 33.5" deep. Bosch Security Systems B.V. Installation manual 2019.08 | V1 | DOC...
Caution! Do not pick up the chassis with the front handles. They are designed to pull the system from a rack only. 2019.08 | V1 | DOC Installation manual Bosch Security Systems B.V.
4.3.4 Installing the chassis in the rack You can install the chassis in a standard rack or in a Telco type rack. Bosch Security Systems B.V. Installation manual 2019.08 | V1 | DOC...
Page 22
Optionally, use screws to secure the front of the chassis to the rack. Installing the chassis in a Telco type rack Notice! Do not use a two post "Telco" type rack. To install the chassis in a Telco type rack: 2019.08 | V1 | DOC Installation manual Bosch Security Systems B.V.
Plug the power cord from the power supply unit into a high-quality power strip that offers protection from electrical noise and power surges. Bosch recommends to use an uninterruptible power supply (UPS). Push the power button on the control panel to turn on the system.
BVMS or VRM system, which runs on a different hardware. Notice! Recorded video streams need to be configured in a way that the maximum bandwidth of the system (BVMS/VRM base system plus iSCSI storage expansions) is not exceeded. 2019.08 | V1 | DOC Installation manual Bosch Security Systems B.V.
On the Desktop, in the Tools folder, right-click the Format_data_hard_drives script, and then click Run as administrator. Follow the instructions. After formatting you can add the storage to the video management configuration. Bosch Security Systems B.V. Installation manual 2019.08 | V1 | DOC...
We strongly recommend not changing any operating system settings. Changing operating system settings can result in malfunctioning of the system. Notice! To perform administrative tasks, you have to log on to the administrator account. 2019.08 | V1 | DOC Installation manual Bosch Security Systems B.V.
The following tasks cannot be done with the Config Wizard. Use BVMS Configuration Client instead. – adjusting schedules – configuring systems with no or multiple Video Recording Manager – configuring external storage devices – adding Video Streaming Gateway Bosch Security Systems B.V. Installation manual 2019.08 | V1 | DOC...
On a computer with Internet access, enter the following URL into your browser: https://activation.boschsecurity.com If you do not have an account to access the Bosch License Activation Center, either create a new account (recommended) or click the link to activate a new license without logging on.
Page 29
To verify playback functionality in the Operator Client The time line moves if the camera is viewed in playback mode. To perform further functionalities refer to the BVMS manual available in the online product catalog. Bosch Security Systems B.V. Installation manual 2019.08 | V1 | DOC...
Connection: ssh://[public-IP-address-of-DIVAR-IP_all-in-one]:5322 6.3.2 Remote connection with Video Security App To make a remote connection with Video Security App: In Apple’s App Store search for Bosch Video Security. Install the Video Security app on your iOS device. Start the Video Security app. Select Add. Enter the public IP address or dynDNS name.
User name: admin (or other user in case one is configured) Password: enter user password Installing an Enterprise Management Server For a central management of multiple systems you can install Bosch VMS Enterprise Management Server on a separate server. To install Bosch VMS Enterprise Management Server on a separate server: Download the BVMS installer from the product page.
Select all hard drives that are part of the RAID group. Start the virtual drive initialization. Exit the MegaRAID Configuration Utility program. Perform a complete system recovery (Initial Factory Setup). See also – Recovering the unit, page 46 2019.08 | V1 | DOC Installation manual Bosch Security Systems B.V.
Make sure that the chassis covers are installed. – Make sure that the heat sinks are installed properly. – Make sure that the ambient room temperature is not too high. Bosch Security Systems B.V. Installation manual 2019.08 | V1 | DOC...
To remove the power: Shut down the system. Remove the power cords from the power supplies. Disconnect the cord from the power strip or wall outlet. Removing the chassis cover 2019.08 | V1 | DOC Installation manual Bosch Security Systems B.V.
Removing a hard drive carrier from a hard drive bay, page 36. Installing a hard drive into a hard drive carrier, page 36. Installing a hard drive carrier into a front drive bay, page 37. Bosch Security Systems B.V. Installation manual 2019.08 | V1 | DOC...
Remove the screws which secure the dummy drive to the hard drive carrier. Remove the dummy drive from the hard drive carrier and place the hard drive carrier on a flat surface. 2019.08 | V1 | DOC Installation manual Bosch Security Systems B.V.
SATA hard drive Notice! Bosch recommends using the respective Bosch hard disk drives. The hard disk drives as one of the critical component are carefully selected by Bosch based on available failure rates. Hard disk drives not delivered from Bosch are not supported.
Use the handle to pull the hard drive carrier out of the chassis. Notice! Except for short periods of time (swapping hard drives), do not operate the unit with the hard drives removed from the bays. 2019.08 | V1 | DOC Installation manual Bosch Security Systems B.V.
Notice! Bosch recommends using the respective Bosch hard disk drives. The hard disk drives as one of the critical component are carefully selected by Bosch based on available failure rates. Hard disk drives not delivered from Bosch are not supported.
Replace the chassis cover. replace the unit in the rack, if necessary, then turn on the system. Replacing the front port panel If you must install a new or replace a damaged front port panel, observe the following instructions. DVD-ROM Front port panel 2019.08 | V1 | DOC Installation manual Bosch Security Systems B.V.
Turn off the system, lay the chassis on a flat surface, then remove the chassis cover. Install the sound card in the dedicated PCI slot. Put back and secure the chassis cover. Bosch Security Systems B.V. Installation manual 2019.08 | V1 | DOC...
Make sure that your air shroud matches your chassis model. Turn off the system and remove the cover. Place the air shroud in the chassis. The air shroud fits behind the two fans closest to the power supply. 2019.08 | V1 | DOC Installation manual Bosch Security Systems B.V.
The fans might still be turning when you remove the fan assembly from the chassis. Keep fingers, screwdrivers, and other objects away from the openings in the fan assembly's housing. Bosch Security Systems B.V. Installation manual 2019.08 | V1 | DOC...
This unit might have more than one power supply connection. To de-energize the unit, remove all connections. LED status: – Amber lighted LED: The power supply is off. – Green lighted LED: The power supply is operating. 2019.08 | V1 | DOC Installation manual Bosch Security Systems B.V.
The power supply can be replaced without turning off the system if a redundant power supply is available. Replacement units can be ordered directly from Bosch RMA desk. To replace the power supply: Unplug the AC power cord of the failed power supply.
OS partition (including VMS settings) with a default configuration. In order to access existing video footage after recovery, the VMS configuration needs to be exported before System Recovery and re-imported afterwards. 2019.08 | V1 | DOC Installation manual Bosch Security Systems B.V.
The storage equipment is shipped with an original manufacturer Service and Support agreement. The Bosch Technical Support is the Single Point of Contact in case of failure but the Service and Support obligations are fulfilled by the manufacturer or a partner.
| Additional documentation and client software DIVAR IP all-in-one 7000 (2U) Additional documentation and client software For more information, software downloads, and documentation, visit www.boschsecurity.com and go to the respective product page. 2019.08 | V1 | DOC Installation manual Bosch Security Systems B.V.