Optimizing The Integrator Zoom And Focus - Christie D4K40-RGB Installation And Setup Manual

Hide thumbs Also See for D4K40-RGB:

Table of Contents

6. To focus the right boresight guide, adjust the green boresight screw.

7. To focus the left boresight guide, adjust the yellow boresight screw.

8. To continue to refine the focus, repeat steps 5 to 7.

9. Before adjusting the stabilization screws, close the shutter.

10. To maintain the adjustments, lock the stabilization screws.

When locking the screws, start with the top stabilization screw and turn it so it just touches the

base. Repeat for the other two stabilization screws. Continue to adjust the locking screws until

they are tight.

11. Open the shutter.

Optimizing the integrator zoom and focus

1. From the Test Pattern menu, select the Integrator Rod test pattern.

4K40-RGB Installation and Setup Guide–D4K40-RGB, Roadie 4K40-RGB

020-102961-03 Rev. 1 (08-2019)

Installation and setup