Preparing The Installation Site; Adjusting The Rigging Handles - Christie D4K40-RGB Installation And Setup Manual

Hide thumbs Also See for D4K40-RGB:

Table of Contents

•

Adjustable wrench

•

Step stool

•

Powder-free N-DEX gloves

•

Clean dry air (CDA)

•

Isopropyl alcohol

•

Cotton swabs

Preparing the installation site

Ensure the installation area is ready for the components.

1. Clear the installation area.

2. Post laser hazard warning signs at all entry doors.

3. Place each component near its installation location.

Roadie 4K40-RGB comes with the rigging handles installed in the landscape position. The handles can

be moved to support other orientations.

1. Ensure the projector is in a secure position.

2. Remove the two screws securing the each handle.

3. If required, flip the projector to the orientation you want it in.

4. Line the two handles over the mounting holes.

5. Install the screws and tighten to a torque of 120 to 150 in-lb.

The following shows the rigging handles installed when the projector is positioned in portrait

orientation.

4K40-RGB Installation and Setup Guide–D4K40-RGB, Roadie 4K40-RGB

020-102961-03 Rev. 1 (08-2019)

Installation and setup