Table of Contents
Scanner-Bioptic ACK/NAK Timeout
This allows you to set the length (in milliseconds) for a timeout for a bioptic scan-
ner's ACK/NAK response. Scan the bar code below, then set the timeout (from 1-
30,000 milliseconds) by scanning digits from the
on page 353, then scanning Save. Default = 5100.
42
* Bioptic ACK/NAK Off
Programming Chart,
ACK/NAK Timeout
Bioptic ACK/NAK On
beginning
Xenon/Granit User Guide
Table of Contents
