Brother DCP-T420W Quick Setup Manual

DCP-T220 / DCP-T226

DCP-T420W / DCP-T425W

DCP-T426W / DCP-T428W

1

Unpack the machine and check the components

Inbox Ink Bottles*4

2

Fill the ink tanks with inbox ink

BTD60BK

BT5009CMY

IMPORTANT

Check the ink bottle model name on the

label. Using the incorrect ink may cause

damage to the machine.

Remove the nozzle cap and insert the bottle nozzle firmly into the ink tank so

that the ink does not spill.

The bottle is self-standing and the ink fills automatically until the bottle is empty.

To fill the ink tank faster, squeeze the bottle on both sides.

3

Load plain A4 paper in the paper tray

Quick Setup Guide

Read the Product Safety Guide first, then read this guide for the correct installation procedure.

Keep this guide next to your machine for quick reference.

In this guide, the illustrations of the DCP-T420W are used unless otherwise specified.

You must follow steps

to

1

5

2

Open the ink tank cover a, remove the cap

b, and place it on the back of the cover c.

to complete the setup.

Remove the protective tape and the film covering the machine.

NOTE

• Save all packing materials and the box in case you must ship your

machine.

• We recommend using a USB 2.0 cable (Type A/B) that is no more than

2 meters long.

Operation Videos

www.95105369.com

1

3

Remove the film and tighten the cap firmly.

When finished, remove the bottle,

pointing the nozzle upward so the ink

does not spill.

Fan the paper well.

CHN-ENG

Version A

Installation

& Using

Videos

Replace the ink tank cap. Repeat

step

2

for the other ink tanks, and

then close the ink tank cover.