Brother DCP-T310 Quick Setup Manual
Hide thumbs
Also See for DCP-T310:
- User manual (579 pages) ,
- Reference manual (28 pages) ,
- Product safety manual (24 pages)
Quick Links
DCP-T310 / DCP-T510W / DCP-T710W
Quick Setup Guide
Read the Product Safety Guide first, then read this Quick Setup Guide
for the correct installation procedure.
Unpack the machine and check the components
1
The components included in the box may differ depending on your country.
Remove the protective tape and film covering the machine and the ink tank cover.
Inbox Ink Bottles*
• Black
• Yellow
• Cyan
• Magenta
* Inbox ink bottles contain
Watch our FAQ videos for help
- Black: approx. 95% yield
with setting up your Brother
- Others: approx. 90% yield
machine.
support.brother.com/videos
uu Reference Guide:
2
Load paper in the paper tray
For more information about paper handling and sizes, see the Reference Guide.
Pull the paper tray completely
out of the machine.
Connect the power
3
cord
Connect the power cord. The machine will power
on automatically.
Select your country
4
or language
(Initial setup only)
After turning the machine on, you may need to set your
country or language (depending on your machine).
If required, follow the steps on the LCD.
Remove the cap and protective
film from the ink bottle, and then
replace the cap.
NOTE
Fasten the ink bottle cap tightly to
avoid leakage.
Select your language
8
(if needed and only for
certain models)
1.
Press Menu.
2.
Press a or b to select [Initial Setup], and then press OK.
3.
Press a or b to select [Local Language], and then press OK.
4.
Press a or b to select your language, and then press OK.
5.
Press Stop/Exit.
Quick Setup Guide
Product Safety Guide
the following yield of
replacement bottles:
Brother Installation Disc
Supply Specifications
Open the output paper tray
cover a.
Fan the paper well and load it in the tray.
Set the date and
5
time
Press a or b to select the number, and then press OK
to set the date and time.
Remove the tip of the ink bottle.
Point the nozzle upward so
Insert the nozzle of the ink bottle
that the ink does not spill,
firmly so that the ink does not
and then remove the nozzle
spill. Fill the ink tank by gently
from the ink tank.
squeezing the bottle as shown.
Empty the entire bottle into the
ink tank.
The latest manuals are available at the Brother Solutions Center:
support.brother.com/manuals
Power Cord
Close the output paper tray cover, and
Adjust the paper guides.
then slowly push the tray completely
into the machine.
6
Fill the ink tanks with the inbox ink
IMPORTANT
Check the ink bottle model name
on the label. Incorrect ink may
cause damage to the machine.
BK (Dye)
BTD60BK
DO NOT USE
BK (Pigment)
BT6000BK
BT6001BK
BT6009BK
Push down on the cap
of the ink tank to close it
tightly. Repeat step
the three other ink tanks.
Close the ink tank cover. The
machine will prepare the ink
tube system for printing.
NOTE
• The Reference Guide for these models is available on the
enclosed installation disc.
• The illustrations in this Quick Setup Guide show the DCP-T710W.
• Save all packing materials and the box in case you must ship your
machine.
• You must purchase the correct interface cable for the
interface you want to use. A USB cable is included with
some models.
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no more
than 2 metres long.
NOTE
Pull out the paper support a, and unfold
the paper support flap b so that the
printed pages do not fall.
CMY
BT5000CMY
BT5001CMY
BT5009CMY
Open the ink tank cover
the tab
downwards to open the
b
cap of the ink tank.
7
Machine settings
When the machine has finished the initial cleaning process,
follow the steps on the LCD to configure the machine settings.
• Check print quality
• Print the installation sheet
NOTE
Refer to the sample below to check the print quality.
6
for
None
A Few
About Half
D00WMJ001-01
CEE-ENG
Version A
2
1
and pull
a
Many
Related Manuals for Brother DCP-T310
Summary of Contents for Brother DCP-T310
-
Page 1: Load Paper In The Paper Tray
DCP-T310 / DCP-T510W / DCP-T710W Quick Setup Guide D00WMJ001-01 The latest manuals are available at the Brother Solutions Center: CEE-ENG Read the Product Safety Guide first, then read this Quick Setup Guide support.brother.com/manuals for the correct installation procedure. Version A Unpack the machine and check the components The components included in the box may differ depending on your country. Remove the protective tape and film covering the machine and the ink tank cover. NOTE • The Reference Guide for these models is available on the enclosed installation disc. • The illustrations in this Quick Setup Guide show the DCP-T710W. • Save all packing materials and the box in case you must ship your machine. Inbox Ink Bottles*... - Page 2 (DCP-T510W/DCP-T710W only) your device and your machine directly. For additional wireless network support, go to support.brother.com/wireless-support. Find your SSID (Network Name) and Network Key (Password) on your wireless access point/router and write them in the table provided below. Select the SSID (Network Name) for your access point/router and enter the SSID (Network Name) Network Key (Password). Press Menu. For Computer For more information, see Enter Text Network Key (Password) Press a or b to select on Your Brother Machine in the Online [Network], and then Go to to install software. User’s Guide. press OK. Press a or b to select When the wireless setup is successful, [WLAN], and then press the LCD displays [Connected]. For Mobile Device SSID: XXXXXXX Network key: XXXX Press a or b to select...