Adjusting Deadbolt Latch Set - Honeywell 8812309S User Manual

NOTE: Deadbolt Latch Set is shipped with the backset set at 2-3/8" (60mm)

Measure the backset (backset is distance between edge of the door and the

center of Lock).

1. TO CONVERT FROM 2-3/8" (60mm) BACKSET TO 2-3/4" (70mm) BACKSET

a. Hold latch with numbers facing forward and thumb pressing on the bolt (Figure 1a).

b. Rotate and pull the latch faceplate all the way out (Figure 1b).

c. Rotate the cylinder cover so that the marking aligns with the 2-3/4" (70mm) position

indicator (Figure 1c).

NOTE: Do not extend Cylindrical Cover past 2-3/4" (70mm)

Figure 1a

Cylindrical Cover Extension Plate

2. TO CONVERT FROM 2-3/4" (70mm) BACKSET TO 2-3/8" (60mm) BACKSET

a. Hold latch with numbers facing forward and thumb pressing on the bolt (Figure 2a).

b. Rotate and push the latch faceplate all the way in (Figure 2b).

c. Rotate the cylinder cover away from you so that the marking aligns with the 2-3/8" (60mm)

position indicator (Figure 2c).

Figure 2a

Figure 1b

2-3/8"

(60mm)

Figure 2b

2-3/8"

(60mm)

Cylindrical Cover Extension Plate

Your latch is now set 2-3/4" (70mm) backset

2-3/4"

(70mm)

2-3/8"

(60mm)

Your latch is now set 2-3/8" (60mm) backset

2-3/8"

(60mm)

3

Figure 1c

Figure 1d

Figure 2c

Figure 2d