Programming
made Simple
See page 7
INDEX
Thermostat Installation
Wiring
Installer Menu
Using the Thermostat
Thermostat Overview
User Menu
Thermostat Operation
Thermostat Schedule
Troubleshooting
Homeowner Help Line
SPECIFICATIONS
Electrical Rating:
Battery Power ..................................... 20 to 30 VAC, NEC Class II, 50/60 Hz
Input-Hardwire .................................... 20 to 30 VAC, NEC Class II, 50/60 Hz
Terminal Load .......................................... 1.5 A per terminal, 2.5A maximum all terminals combined
Setpoint Range ........................................ 45° to 99° F (7° to 37° C)
Rated Differentials (@ 6°F/ Hr):
Heat Pump (Heat)................................ 0.9°F
Heat Pump (Cool) ................................ 0.9°F
Auxiliary Heat ...................................... 0.5°F
Operating Ambient .................................. 32°F to +105°F (0° to +41°C)
Display Temperature Range ....................... 32°F to +99°F (0 to 37°C)
Operating Humidity ................................. 90% non-condensing maximum
Shipping Temperature Range ................... -20°F to + 150°F (-29° to +65°C)
Thermostat Dimensions ........................... 3-3/4" H x 6" W x 1-1/8" D
emerson.com/white-rodgers
Battery Powered or Hardwired with Common
Optional Accessory: Wall
Cover-Up Plate F61-2663,
2-4
Thermostat Applications
2
3-4
Single Stage Compressor, Heat Pump
Systems (air source or geothermal) –
5-7
1 Stage Aux/Emergency Heat, Electric
5
or Gas (Dual Fuel)
6
MERCURY NOTICE: This product does not contain
6
mercury. However, this product may replace a product
7
that contains mercury. Mercury and products containing
mercury must not be discarded in household trash.
7-8
Refer to www.thermostat-recycle.org for information
on disposing of products containing mercury.
8
Fast
Med
1.2°F
1.2°F
0.75°F
1F83H-21PR (Programmable)
Installation and Operating Instructions
Heat Pump Thermostat
6 3/4" W x 4 1/2" H
Slow
1.7°F
1.7°F
1.9°F
PART NO. 37-7511003
Maximum
Stages
Heat/ Cool
2/1
Replaces 37-7511002
2042
Table of Contents
Related Manuals for Emerson 1F83H-21PR
Summary of Contents for Emerson 1F83H-21PR
- Page 1 1F83H-21PR (Programmable) Installation and Operating Instructions Heat Pump Thermostat Battery Powered or Hardwired with Common Programming made Simple See page 7 Optional Accessory: Wall Cover-Up Plate F61-2663, 6 3/4” W x 4 1/2” H INDEX Thermostat Installation Maximum Thermostat Applications...
-
Page 2: Thermostat Installation
THERMOSTAT INSTALLATION WIRING Refer to equipment manufacturer’s instructions for specific system wiring information. After wiring, see INSTALLER MENU for proper thermostat configuration. Wiring table shown are for typical systems and describe the thermostat terminal functions. Terminal Designations Terminal Function Power (24V) Changeover Terminal-Energized in Cool (O) or Heat (B) for Heat Pump or Damper Systems Heat and Cool Mode 1st Stage Compressor... -
Page 3: Installer Menu
Battery Location Premium AA alkaline batteries are required when C-wire is not available. When C-wire is available, the batteries provide a back-up source of power (this will maintain the clock in the event of a power outage). 1.) W2/E Jumper Wire This thermostat electrically connect the W2 and E terminals so that you do not need to do this with a jumper wire. -
Page 4: Test Equipment
INSTALLER MENU (C0ntinued) Settings Installer’s Menu # Default Setting Description (flashing icons) (Hold Menu 8 Seconds) (Press °F – Fahrenheit Fahrenheit or Celsius °F °C – Celsius Temperature Display Adjustment (adjust the displayed “Room -5 to +5 Temperature”) Continuous Display Light (keep On –... -
Page 5: Using The Thermostat
USING THE THERMOSTAT THERMOSTAT OVERVIEW Before you begin using your thermostat, you should be familiar with its features, display and the location/operation of the thermostat buttons and switches. THERMOSTAT BUTTONS THE DISPLAY AND SWITCHES 1.) Fan Switch 10.) Thermostat is protecting the equipment from short cycling (5-minute delay) 2.) System Switch 11.) Indicates that the system is running in cool, heat or auxiliary... -
Page 6: Thermostat Operation
USER MENU To customize thermostat settings, press and hold the Menu button for ½ second from the homescreen. Use the buttons to highlight Settings and press Next. Use Next and Back to navigate through menu items. Press to change the setting. User’s Menu # Default Setting Settings... -
Page 7: Troubleshooting
THERMOSTAT SCHEDULE / PROGRAMMING For tips on programming your thermostat to receive optimal comfort, convenience and energy savings go to: thermostathelper.com Energy Saving Factory Schedule This thermostat is programmed with the energy saving settings shown in the table below for all days of the week. - Page 8 To conveniently reset only the schedule and user settings back to factory defaults, press Menu and Backlight buttons at the same time and hold until the display goes blank and resets. HOMEOWNER HELP LINE: 1-800-284-2925 Emerson and White-Rodgers are trademarks of Emerson Electric Co. ©2020 Emerson Electric Co. All rights reserved. emerson.com/white-rodgers...