Table of Contents
PERFORMING A TRANSIT WITH PIN CODE ONLY
Performing a transit with PIN code only
If the device is set to work in Personal Identification Number (PIN) code only
transit, it authenticates the cardholders using only the PIN code entered on the
display. To use this transit type, every cardholder must be assigned a unique PIN
number.
In this transit mode, the device shows the following display:
Figure 27 PIN code prompt
To perform a transit with PIN code only:
1
Type your PIN code using the keyboard (PIN is always a numeric value).
When you have entered the PIN code, the device use this number to identify the
cardholder and to verify the cardholder's authorization to transit from the door.
Note: You do not need to press Enter to confirm the PIN entered; once the
configured number of digits configured for the PIN is reached, the device
automatically processes it.
If access is granted, the device emits the Access Granted sound (a gentle chime),
displays the Access Granted page, and unlocks the door controlled by the device.
If the transit is denied, the device emits an access denied sound, displays a wrong
access event, and doesn't unlock the door.
41
Hide quick links:
Table of Contents
