Clocking In And Clocking Out - Honeywell Tema-Voyager Compact User Manual

In the T&A application, "Clock in" and "clock out" are terms that refer to the

direction of a transit.

Clock in indicates the time you enter the office (the clock starts counting the time

the cardholder is in the office).

Clock out indicates the time you leave the office (the clock stops counting the

time).

A Voyager device can be configured for one direction (clock-in OR clock-out), or

for both directions (clock-in AND clock-out).

In this case, to set a specific direction for the device you must use the "Change

direction" function.

To change the transit direction and perform the transit:

1

2

3

Check the current direction set for the terminal that is shown on the right side

of the header of the display.

Figure 9 Change Transit Direction display

Select the Change direction icon on the toolbar and click Enter. The direction

of the terminal in the header line of the display will change.

Present your card to the device.

CLOCKING IN AND CLOCKING OUT

19