Step 4:Install the Limit Switches
What you will need
3 x Limit Switch (60cm)
14
Align the X-axis, Y-axis and Z-axis limit switches with the screw holes and tighten the M2.5 Screws.
For the Z-axis one, please use the M2.5*10 Screw, for the X-axis and Y-axis, use the M2.5*12 Screws.
M2.5 Screws
Limit Switch
29
4 x M2.5*10 Screw
30
4 x M2.5*12 Screw