Panasonic KX-PRS120C Operating Instructions Manual page 25

Main menu:

"Key detector"

Sub-menu 1

Search

Battery check

Main menu:

"Ring adjustments"

Sub-menu 1

Ringer volume

*4, *5

Ringer tone

Night mode

*1

If you program these settings using one of the handsets, you do not need to program the

same item using another handset.

*2

This menu is not displayed when scrolling through the display menus. It is only available in

direct command code.

*3

This feature allows the unit to automatically adjust the date and time each time caller

information including date and time is received.

To turn this feature on, select "Caller ID auto". To turn this feature off, select

"Manual". (Call Display subscribers only)

To use this feature, set the date and time first (page 11).

*4

If you subscribe to a distinctive ring service, select a tone (tone 1 to 2). If you select a

melody, you cannot distinguish lines by their ringers.

*5

The preset melodies in this product ("Tone 3" - "Melody 30") are used with permission of

© 2012 Copyrights Vision Inc.

*6

This setting is available when you have the key detector (KX-TGA20). Read the installation

manual for more information on the key detector.

*7

For models with supplied key detectors, the display shows "1:Detector1".

*8

If you register 2 or more key detectors.

*9

If you have 2 or more key detectors.

*10 Wallpaper is displayed in the standby mode only when you select "Digital(Small)" or

"Off" for this setting.

*11 You can select to display either a single item or multiple items on one screen at a time for

the handset main menu icons in function menu, recorded message list, phonebook list, caller

list, and redial list.

*12 You can set the handset display backlight while on charge.

– "On": Backlight is on (dimmed).

– "Off": Backlight turns off after 10 seconds of charging.

*13 If you subscribe to a Call Display service and want to view the caller's information after lifting

up the handset to answer a call, turn off this feature.

*14 The flash time depends on your telephone exchange or host PBX. Contact your PBX

supplier if necessary.

PRS120C(en)_0121_ver110.pdf

*6

Sub-menu 2

–

–

*17

Sub-menu 2

–

–

On/Off

Start/End

Select group

25

Programming

Settings

Code

–

#655

–

Settings

Code

0-6: Off-6 <6>

#160

#161

1: On

#238

0:

<11:00 PM/06:00

#237

AM>

1-9: Group 1-9

#241

–

–

–

27

27

27

25

2014/01/29

14:56:58