Ce Marking; Declaration Of Conformity; Note For The Machine Manufacturer - Bosch Rexroth IndraControl VAU 01.1U Project Planning Manual

Vau 01.1u ups with usb interface
Hide thumbs Also See for Rexroth IndraControl VAU 01.1U:
Table of Contents
DOK-SUPPL*-VAU*01.1U**-PR03-EN-P
Rexroth IndraControl VAU 01.1U UPS with USB interface
4.4.2

CE Marking

Declaration of Conformity

Note for the Machine Manufacturer

Standard
Meaning
EN 61558-2-6
Transformer for 24 V power supply unit, protective separa‐
tion
EN 60664-1
Overvoltage category II
EN 60 529
Degrees of protection (including housings and installation
compartments)
EN 60 068-2-6
Vibration test
EN 60068-2-27
Shock test
EN 60721-3-3
Classification of ambient conditions, operation
EN 60721-3-2
Classification of ambient conditions, transport
EN 60721-3-1
Classification of ambient conditions, storage
UL 508
Industrial Control Equipment
Fig.4-5:
Used standards
The electronic products described in this project planning manual comply with
the requirements and goals of the following EC directive and with the
harmonized European standards:
EMC guideline 2004/108/EC
The electronic products described in this project planning manual comply with
the requirements on the operation within the industrial environment:
Standard
Title
DIN EN
Electromagnetic compatibility (EMC)
61000-6-4
Volume: 6-4: Generic standards – emitted interfer‐
(VDE
ence for industrial environments (IEC
0839-6-4)
61000-6-4:2006)
DIN EN
Electromagnetic compatibility (EMC)
61000-6-2
Volume: 6-2: Generic standards – noise immunity
(VDE
for industrial environments (IEC 61000-6-2:2005)
0839-6-2)
Fig.4-6:
Electromagnetic compatibility (EMC) standards
The electronic products described in this project planning manual do not fall
under the machines listed in the EC machinery directive. Therefore, explana‐
tions are not required for the 2006/42/EC machinery directive and do not ex‐
ist.
2006/42/EC, the EU directive for machines, specifies the requirements on a
machine. In this directive, a machine is defined as a combination of the com‐
ponents or mechanisms combined with each other. The described products
belong to the electrical equipment of a machine. Therefore, they have to be
included in the declaration of conformity of the machine manufacturer.
Bosch Rexroth AG
23/63
Technical Data
Edition
September
2007
March 2006
Table of Contents
loading

Table of Contents