Other Programming Selections - Honeywell Captuvo SL22 User Manual
Enterprise sled
Hide thumbs
Also See for Captuvo SL22:
- Quick start manual (18 pages) ,
- Quick start manual (16 pages) ,
- Quick start manual (17 pages)
Table of Contents
you are programming. (See
4-9 for further information.)
Step 3. Terminal Type
Scan the 0 9 9 bar codes on the inside back cover to program the sled
for your terminal ID (you must enter 3 digits).
Step 4. Code I.D.
In the
Symbology Chart,
which you want to apply the data format. Locate the Hex value for that
symbology and scan the 2 digit hex value from the
inside the back cover of this manual.
Step 5. Length
Specify what length (up to 9999 characters) of data will be acceptable
for this symbology. Scan the four digit data length from the
Programming Chart
characters is entered as 0050. 9999 is a universal number, indicating
all lengths.)
Step 6. Editor Commands
Refer to
that represent the command you want to enter. 94 alphanumeric
characters may be entered for each symbology data format.
Step 7. Scan Save to save your data format, or Discard to exit without saving
your changes.
Other Programming Selections
Clear One Data Format
This deletes one data format for one symbology. If you are clearing
the primary format, scan 0 from the
cover of this manual. If you are clearing an alternate format, scan 1, 2,
4 - 2
beginning on page A-1, find the symbology to
inside the back cover of this manual. (Note: 50
Data Format Editor Commands
Save
Primary/Alternate Data Formats
(page 4-3). Scan the symbols
Programming Chart
on page
Programming Chart
Enter Data Format
Discard
inside the back
Hide quick links:
Table of Contents
