Table of Contents
86
en | Configuring the AutoDome Easy II IP
12
Configuring the AutoDome Easy II IP
The SETTINGS page provides access to the configuration menu,
which contains all the unit's parameters arranged in groups.
You can view the current settings by opening one of the
configuration screens. You can change the settings by entering
new values or by selecting a predefined value from a list field.
There are two options for configuring the unit or checking the
current settings:
–
–
In Basic Mode the most important parameters are arranged in
seven groups. This allows you to change the basic settings with
just a few entries and then put the device into operation.
Advanced Mode is recommended for expert users or system
support personnel. You can access all unit parameters in this
mode. Settings that affect the fundamental functionality of the
unit (such as firmware updates) can only be altered in the
advanced mode.
All parameter groups are described in this chapter in the order
in which they are listed in the configuration menu, from the top
of the screen to the bottom.
CAUTION!
The settings in the advanced mode should only be processed or
modified by expert users or system support personnel.
All settings are backed up in the memory so they are not lost
even if the power fails.
Navigation
1.
2.
F.01U.164.576 | 2.0 | 2010.03
Basic mode
Advanced mode
Click one of the menu items in the left window margin. The
corresponding submenu is displayed.
Click one of the entries in the submenu. The Web browser
opens the corresponding page.
Installation Manual
AutoDome Easy II IP
Bosch Security Systems, Inc.
- Quick Links:
- Preparing the Wiring
- Ptz Setup Menu
Hide quick links:
Table of Contents
