Table of Contents
118 en | Common User Commands (unlocked)
14
Common User Commands (unlocked)
This chapter details the commonly used Bosch keyboard setup
commands. See Section 15 Keyboard Commands by Number,
page 122, for a complete list of commands.
14.1
Setting AutoPan Mode
AutoPan mode pans the AutoDome Easy II camera 360º or pans
between user defined limits (when programmed). The
AutoDome Easy II camera continues to pan until stopped by
moving the joystick.
To pan 360º:
1.
2.
To set left and right pan limits:
1.
2.
To start AutoPan between limits:
1.
2.
F.01U.164.576 | 2.0 | 2010.03
Press ON-1-ENTER.
Move the joystick to stop the pan.
Move the camera to the starting position and press SET-
101-ENTER to set the left limit.
Move the camera to the end position and press SET-102-
ENTER to set the right limit.
Press ON-2-ENTER.
Move the joystick to stop the pan.
Installation Manual
AutoDome Easy II IP
Bosch Security Systems, Inc.
- Quick Links:
- Preparing the Wiring
- Ptz Setup Menu
Hide quick links:
Table of Contents
