Honeywell ScanPal EDA71 User Manual page 83

Enterprise tablet powered by android

Hide thumbs Also See for ScanPal EDA71:

Full Factory Reset the Tablet

1. Swipe up from the bottom of the Home screen to access all apps.

2. Select Settings

3. Tap Erase all data (factory reset).

4. Tap Reset Phone.

5. If prompted, type your screen lock security pattern, PIN, or password and tap

6. Tap Erase all data. A message appears informing you an Full factory reset is

Repairs

Repairs and/or upgrades are not to be performed on this product. These services

are to be performed only by an authorized service center (see

page ix).

Maintenance

Your device provides reliable and efficient operation with a minimum of care.

Although specific maintenance is not required, the following sections describe

periodic checks to ensure dependable operation.

Clean the tablet

The tablet housing, scanner window, camera window and touch screen may be

cleaned with a soft cloth dampened with water or a mild detergent-water solution.

If a mild detergent solution is used, wipe the tablet with a clean cloth dampened

only with water to remove any detergent residue.

Reading performance may degrade if the scanner window is not clean. If the window

is visibly dirty, or if the scanner is not operating well, clean the window.

Caution: Do not submerge the tablet in water or cleaning solution.

Caution: Ensure all components are dry prior to mating the tablet with

EDA71 User Guide

next (

being performed.

Do not use abrasive wipes or cloths on the windows or touch screen.

Abrasive wipes may scratch the windows and touch screen. Never use

solvents (e.g., acetone) on the housing or window. Solvents may dam-

age the tablet finish, the windows or touch screen.

charging accessories or other peripheral devices. Mating wet compo-

nents may cause damage not covered by the warranty.

> System > Advanced > Reset options.

Customer Support