Page 1
DRAFT - 3/24/23 ScanPal EDA10A Enterprise Tablet powered by Android™ User Guide...
Page 2
DRAFT - 3/24/23 Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made.
DRAFT - 3/24/23 TABLE OF CONTENTS Customer Support ........................vii Technical Assistance ......................vii Product Service and Repair ....................vii Limited Warranty ........................vii Chapter 1 - Tablet Features................1 EDA10A Enterprise Tablet ......................1 EDA10A Model Overview ...................... 2 Tablet Features..........................
Page 4
Customize the Favorites Tray ...................26 Use Google™ Search......................26 About Screen Gestures .......................26 Set the Time Zone........................27 About Honeywell Applications....................27 Applications You Can Download to the Tablet ..............29 Unlock Developer Options .......................30 Chapter 3 - Use the Image Engine .............. 31 About the Image Engine ......................31...
Page 5
DRAFT - 3/24/23 Add a Scan Setting Profile....................39 Delete a Scan Setting Profile ....................39 Change the Bluetooth Scanner Settings ..............39 About the Optional Digital Scan Button ................40 Enable and Configure the Digital Scan Button ............40 Scan Barcodes..........................40 About Scanning Configuration Barcodes..............41 Use the Scan Demo App ......................42 Change the Scan Demo Symbology Settings ............42 Chapter 4 - Use the Phone................43...
Page 6
Software Downloads ......................75 About Transferring Files via USB Connection ............76 Install Software with AutoInstall....................76 Optional microSD Card Method..................77 About the Honeywell Upgrader ....................77 View the Installed OTA Version ..................77 Install OTA Updates......................78 Restart (Reboot) the Computer....................80 About Enterprise Data Reset....................80 Before You Begin ........................80...
Page 7
DRAFT - 3/24/23 Erase All Data (Factory Reset)..................82 Repairs..............................82 Maintenance ..........................82 Clean the Tablet........................82 Appendix A - Specifications ................83 Computer Agency Information ....................83 Label Locations........................83 Physical and Environmental Specifications ..............83 Barcode Symbologies Supported ..................84 S0703-SR (Standard Range) Imager ...................84 S0703 Imager Field of View/Resolution ..............86 EDA10A Enterprise Tablet User Guide...
Page 8
DRAFT - 3/24/23 EDA10A Enterprise Tablet User Guide...
Technical Support portal. Product Service and Repair Honeywell International Inc. provides service for all of its products through service centers throughout the world. Go to sps.honeywell.com and select Support >...
Page 10
DRAFT - 3/24/23 viii EDA10A Enterprise Tablet User Guide...
Note: Applications and settings vary by OS version. Your tablet may not include all the features shown in this manual. EDA10A ScanPal Enterprise Tablet ScanPal EDA10A Enterprise tablets deliver real-time connectivity, advanced data capture, and future-proof investment protection. All EDA10A models come equipped for fast Wi-Fi connectivity with a WLAN 802.11 a/b/g/n/ac/r/k/mc/ax radio and Bluetooth (v5.1) technology that includes Bluetooth Low Energy (BLE)
DRAFT - 3/24/23 Tablet Features Power Lighting/ Volume Button Proximity Front Button Sensor Camera Imager Window (LED/Laser Aperture) Scan Status Power Indicator Scan Button Scan Button Touch Panel EDA10A Enterprise Tablet User Guide...
Page 14
DRAFT - 3/24/23 Flash Rear Camera Scan Button Microphone NFC Tap Battery cover Speaker I/O Connector Speaker EDA10A Enterprise Tablet User Guide...
The tablet uses a rechargeable Li-ion battery as its main power source. Several factors determine the life of your battery, such as display brightness, display timeout, input device, extreme temperature, and usage. Honeywell recommends that you keep the battery charged at all times to prevent data loss.
DRAFT - 3/24/23 For more information about charging accessories, see the EDA10A Accessories User Guide, available on the EDA10A product page at sps.honeywell.com. Contact your local sales representative for replacement battery ordering information. Caution: Improper battery replacement or incompatible device usage may result in risk of burns, fire, explosion, or other hazard.
DRAFT - 3/24/23 • Power off the computer. • Place the unit in Swap Battery mode (see below). Hot Swap You can replace the battery on demand provided the following conditions are met: • The tablet has been powered on for at least 4 minutes. •...
Page 18
DRAFT - 3/24/23 5. Pull up the tab on the back of the battery and use it to lift and remove the battery from the tablet. EDA10A Enterprise Tablet User Guide...
Page 19
DRAFT - 3/24/23 Install the Battery 1. Insert the charged battery into the computer. 2. Slide the battery locks to secure the battery. 3. Install the battery cover. EDA10A Enterprise Tablet User Guide...
The tablet is connected to external power and the battery is charging. There is a battery error. Install another battery. If the problem persists, contact Honeywell Technical Support. Along with the battery icon, there is a battery status LED above the touch screen (see next section).
To change the battery status LED behavior: 1. Swipe up from the bottom of the Home screen to access all apps. 2. Tap Settings > Honeywell Settings > Battery LED. 3. Choose one of the options: • Default Battery LED (optional Android OS configuration) •...
DRAFT - 3/24/23 Battery Life and Conservation If you store the batteries outside the tablet for long periods of time, they slowly discharge. Honeywell recommends storing the battery in a charger to maintain battery performance. When you want to: Do this to save battery power Use the tablet, and Connect the tablet to an external power source to charge.
DRAFT - 3/24/23 standards. Contact your Honeywell sales representative or distributor if this battery is no longer available. Model Part Number BAT-EDA10A 3012-0418-001 • Discarded batteries may create a safety hazard. Before disposal, cover the battery contacts with electrical insulating tape.
DRAFT - 3/24/23 Welcome Screen The first time you power on the tablet, a Welcome screen appears. Select a language and then tap Start. You can either scan a configuration barcode or select manual to set up the tablet. To learn more about how to Scan Barcodes, see page...
Note: Maximum glove thickness of 2 mm (0.08 inches) for touch screen response. 1. Swipe up from the bottom of the Home screen to access all apps. 2. Tap Settings > Honeywell Settings > Glove Mode. 3. Tap the slider to turn Glove Mode on. 4. Exit the Settings app.
DRAFT - 3/24/23 About the Audio Features The EDA10A has multiple speakers, a microphone, and several software tools to configure sound volume or enable vibration feedback. Audio Settings This section describes the audio and sound settings you can configure in the Settings app.
Insert a microSD Card (Optional) You can use a microSD card to increase file storage capacity or to install software. Honeywell recommends the use of Single Level Cell (SLC) industrial-grade microSD™ or microSDXC™ memory cards with EDA10A ScanPal Enterprise Tablets for maximum performance and durability.
For more information about charging, communication and mounting accessories, see the EDA10A Accessories User Guide, available on the EDA10A product page at sps.honeywell.com. For ordering information and a list of all available EDA10A accessories, contact your local sales representative.
Page 29
DRAFT - 3/24/23 Accessory Part Number x = Kit variations. See Product Accessory Guide at sps.honeywell.com for additional details. Single Charging Dock EDA10A-SC Display Dock EDA10A-DB Protective Boot EDA10A-RB Hand strap EDA10A-HS Shoulder strap EDA10A-SS Protective screen film EDA10A-SP Carrying case EDA10A-CASE Stylus &...
Page 30
DRAFT - 3/24/23 EDA10A Enterprise Tablet User Guide...
ABOUT THE USER INTERFACE AND APPLICATIONS Use this chapter to learn about the user interface and how to interact with the screen. You can also use this chapter to learn about the Honeywell applications on the computer. About the User Interface The Android operating system provides a touch-friendly and easy-to-navigate user interface.
DRAFT - 3/24/23 Home Screen Features Item Description Notifications panel / Status icons to the left tell you when an app has sent notifications, such Status bar as an arriving message. System icons to the right display the current wireless and network connection state and battery level. Search bar Search the Internet or the computer using Google™.
1. Swipe up from the bottom of the Home screen to access all apps. 2. Tap Settings > Honeywell Settings > Keyremap. 3. Tap the plus sign (+). 4. Press the button you want to remap or select one of the virtual keys.
To restore the button default action: 1. Swipe up from the bottom of the Home screen to access all apps. 2. Tap Settings > Honeywell Settings > Keyremap. 3. Tap the clean icon 4. Choose the remapped button(s) you want restored to the default setting.
DRAFT - 3/24/23 When a notification icon appears in the status bar at the top of the screen: 1. Swipe down from the top of the screen to open the notifications panel. 2. Respond to the notification. You can take one of the following actions: •...
DRAFT - 3/24/23 Customize the Favorites Tray Modify the Favorites tray to contain the apps you use the most. 1. Tap and hold the app icon you want to replace on the Favorites tray. 2. Drag and drop the app on “X Remove” at the top of the screen. 3.
Honeywell applications help you troubleshoot and connect your computer to other devices and networks. Some of the applications in this table are located in the Power Tools app. To learn more about Honeywell Power Tools, go to sps.honeywell.com to download the Power Tools User Guide.
Page 38
NFC functionality, and printing via Bluetooth technology. Information on how to create custom applications for your Honeywell mobile computer can be found in the Honeywell Software Development Kit (SDK) for Android, available from Technical Support Downloads Portal. HUpgrader...
DRAFT - 3/24/23 Applications You Can Download to the Tablet You can download Honeywell applications to extend the capabilities of the tablet. You may need to purchase a license to run some applications. To learn more about the applications described in this section and other Honeywell software solutions, go to sps.honeywell.com...
EMM providers may also make use of generic Android APIs to provide standard EMM functionality. Honeywell UEMConnect is available for download in the Google Play™ store. UEMConnect licenses are included with the purchase of applicable SOTI offerings through Honeywell or may be purchased separately for applicable EMM solutions not purchased through Honeywell.
Use the imager as a camera to capture black and white images, such as signatures or pictures of damaged inventory. The imager camera feature requires the development of a custom application that uses the Honeywell Mobility SDK for Android. To download the Honeywell Mobility SDK for Android, see...
You can find information on how to create custom applications for the computer in the Software Development Kit (SDK) available for download from the Technical Support Downloads Portal at https://hsmftp.honeywell.com. Once you create an account and enter the portal, navigate to Software > Software and Tools >...
Data Editing Plugin Specify a data editing plug-in and edit plug-in settings. None Symbology Prefix Specify a symbology identifier prefix to the barcode data. None Options include: • None • Honeywell • EDA10A Enterprise Tablet User Guide...
Page 44
‘//’ ACTION '$' extra-data Where: ACTION and extra-data are any string of characters. Launches an application listening for the intent. Intent action: “com.honeywell.scantointent.intent.action.” + ACTION Intent extra: “com.honeywell.scantointent.intent.extra.DATA” contains the remainder of the barcode data after the first ‘$’ character.
Page 45
Tap the check box to toggle the feature On or Off. • Select Center Decode to adjust the Center Decode Timeout and the Window dimensions. Honeywell recommends leaving the settings at 50 (default) to define the “center” area for the barcode. Configurable parameters: •...
Page 46
DRAFT - 3/24/23 Setting Description Default DPM mode Use this setting when scanning Direct Part Marking (DPM) No DPM barcodes that are etched or imprinted directly into the surfaces of optimi- materials including metal and plastic. zation Options include: • No DPM optimization •...
Page 47
DRAFT - 3/24/23 Setting Description Default Multicode Scan When you enable Multicode Scan, each barcode is checked to see Disabled whether it satisfies the defined multicode rules before the results are transmitted. Options include: • Enable or disable multicode scanning. •...
Page 48
DRAFT - 3/24/23 Trigger Settings Setting Description Default Enable Scan Enable or Disable activating the imager by pressing the side scan Enabled Trigger buttons or the virtual Scan button in the Scan Demo app. Scan delay Set the minimum amount of time in seconds before the scanner can read another barcode.
To create a scan setting profile for a custom app on the computer: 1. Swipe up from the bottom of the Home screen to access all apps. 2. Tap Settings > Honeywell Settings > Scanning > Internal Scanner. 3. Tap in the upper right corner of the app screen.
1. Swipe up from the bottom of the Home screen to access all apps. 2. Tap Settings > Honeywell Settings > Digital Scan Button. 3. Tap Enable Digital Scan Button to turn the feature on. A preview of the button appears at the bottom of the screen.
By reducing the active symbology list, you can increase scan speed. Note: To use the rear scan button, navigate to Settings > Honeywell Settings > Touch Key and turn on Touch Key Switch. 1. Point the scanner window at the barcode. For optimum performance, avoid reflections by scanning the barcode at a slight angle.
DRAFT - 3/24/23 Use the Scan Demo App Use the Scan Demo app to read barcodes or to test your symbology decode settings. 1. Swipe up from the bottom of the Home screen to access all apps. 2. Tap the Demos app. 3.
DRAFT - 3/24/23 CHAPTER USE THE PHONE You can use the phone feature to make and receive phone calls as well as transmit data through wireless wide-area networks (WWANs). Note: Phone features are only supported on EDA10A WWAN models (EDA10A-1). About the Phone Phone features on the tablet include a speaker and a microphone.
DRAFT - 3/24/23 Dual SIM Dual Standby Mode The nano-SIM and eSIM can be provisioned with either the same or different mobile carriers. When both SIMs are provisioned, the EDA52 operates in Dual SIM Dual Standby (DSDS) mode. In this mode, both SIMs can connect to the selected mobile network.
DRAFT - 3/24/23 Provision nano-SIM Card Note: On EDA10A WWAN models with an eSIM, you do not need to install a nano-SIM card unless you want a dual carrier setup. 1. Press and hold the Power button until the options menu appears. 2.
DRAFT - 3/24/23 Make a Phone Call Once the phone is activated, you can make a phone call. 1. Tap in the favorites tray to open the phone app. 2. Use one of the methods below to enter the telephone number you want to call. •...
DRAFT - 3/24/23 Switch Apps During a Phone Call You can multi-task while a phone call is in progress. For example, you can use the Calendar app to check your schedule during a call. Note: Depending on your WWAN connection and carrier, apps that need a data connection may be unable to access online data while the phone call is in progress.
Page 58
DRAFT - 3/24/23 EDA10A Enterprise Tablet User Guide...
DRAFT - 3/24/23 CHAPTER USE THE CAMERA Use this chapter to learn how to take pictures and record videos with the color camera. Note: Due to model and software version differences, screen images and features included in this chapter may vary from what you see on your device. About the Color Camera The EDA10A comes equipped with two color cameras: an 8-megapixel camera located on the front, and a 16-megapixel camera on the rear.
DRAFT - 3/24/23 3. The camera automatically adjusts the focus but you can tap the screen to modify the focal point. By default, the rear camera senses the lighting in the environment and turns the flash on, if needed. 4. Tap or the Volume button to take a photo.
DRAFT - 3/24/23 Color Filters Flash Advanced Setting Settings • Color Filters Stylize your pictures by applying a filter. Options include: None, Sepia, Negative, Solarize, Posterize, and Aqua. • Flash Setting Select to adjust the camera flash setting (e.g., automatic, no flash or always flash).
Page 62
DRAFT - 3/24/23 EDA10A Enterprise Tablet User Guide...
DRAFT - 3/24/23 CHAPTER CONFIGURE THE COMPUTER Use this chapter to learn about the available methods for configuring your mobile computer. You can also use this chapter to learn how to configure network communications and wireless security. How to Configure the Computer You can configure many parameters on the computer such as the bar code symbologies the integrated scanner decodes, or the network settings.
Page 64
DRAFT - 3/24/23 Network & internet In the Settings app, select Network & internet to access the following settings. Setting Description Wi-Fi • Turn WLAN radio On or Off. • Lists available Wi-Fi networks in range and the connection status when the radio is turned On.
Page 65
DRAFT - 3/24/23 Setting Description Connection preferences Bluetooth • Use Bluetooth - Turn the Bluetooth radio On or Off. • Lists Bluetooth enabled devices in range when the radio is turned On. • Connect to a Bluetooth Device. • View and rename the computer. •...
Page 66
DRAFT - 3/24/23 Setting Description Do Not Disturb Set people, apps, and alarms that notifications will be displayed from. Wireless emergency alerts Manage emergency alert notifications. Hide silent notifications in Icons from apps with silent notifications will not be displayed in status bar the status bar.
Page 67
DRAFT - 3/24/23 Setting Description Adaptive brightness Set how the screen in sleep mode responds when new notifications are received (e.g., wake or do not wake). Lock screen Select what to show on the lock screen and when to display new notifications.
Page 68
DRAFT - 3/24/23 Setting Description Text and display Configure display features that may aid visual accessibility levels. • Adjust Font size • Adjust Display size • Turn Bold text On or Off • Set Color correction • Turn Color inversion On or Off •...
Page 69
DRAFT - 3/24/23 Security In the Settings app, select Security to view latest Security scan results, security updates and phone encryption status. Access additional settings related to device security Setting Description Google Play Protect Manually initiate a scan of the apps on the device to check for problems.
Page 70
DRAFT - 3/24/23 Setting Description Activity controls Choose what type of activities are saved in your Google account. A Google account must be associated with the device to use this feature. Opt in or out of ad personalization features. When this feature is on, ads are personalized with the activity and information from your Google account.
Page 71
DRAFT - 3/24/23 Honeywell Settings In the Settings app, select Honeywell Settings to access the following settings. Setting Description Battery LED Configures the battery LED behavior. To learn more see, Change the Battery Status LED Behavior on page 11. Battery Optimizer View battery status and app usage information.
Page 72
Options include: Keep awake on motion and Face down suspend. Staging Hub Use this agent and settings to connect the computer to the Honeywell Staging Agent Hub Foundation software platform; a centralized software platform IT integrators and administrators can use as a solution for managing, monitoring and deploying Honeywell devices in a connected workspace environment.
Page 73
DRAFT - 3/24/23 System In the Settings app, select System to access the following settings. Setting Description Languages & • Set the active language. input • Set and manage Virtual and Physical Keyboard input methods. • Configure auto-typing features such as capitalization, punctuation, spell check, and the personal dictionary.
DRAFT - 3/24/23 About tablet In the Settings app, select About tablet to access the following information. Setting Description Device name A nickname to identify the device. To change, tap Device name and enter a new name. The phone number(s) assigned to the device (sim slot 1 and sim slot 2). Legal information Provides links to third-party licenses and other legal information.
Page 75
DRAFT - 3/24/23 3. Tap Use Wi-Fi to toggle Wi-Fi radio on. A list of discovered networks appears. 4. On the list, tap a network name to initiate a connection. To add a network if it does not appear on the list: a.
DRAFT - 3/24/23 8. Tap Save. Disable Wi-Fi Notifications By default, when Wi-Fi is enabled, you receive notifications in the Status bar when the computer discovers a wireless network. You can disable these notifications. 1. Swipe up from the bottom of the Home screen to access all apps. 2.
DRAFT - 3/24/23 How to Connect to Virtual Private Networks The computer supports connecting to virtual private networks (VPNs). This section describes how to add and connect to VPNs. To configure VPN access, you must obtain details from your network administrator. You can view and change VPN settings in the Settings app.
Wi-Fi Protected Access (WPA) • 802.1x Honeywell recommends WPA2 security with PSK (Personal) or 802.1x (Enterprise) key management. Before you set security, you need to enable the radio, set the date, and set the SSID on your computer. To use 802.1x security, you need to load a root certificate on your computer.
DRAFT - 3/24/23 4. Tap Install a certificate. 5. Select either CA certificate, VPN & app user certificate, or Wi-Fi certificate. 6. Tap the Menu icon , then navigate to the location where you saved the certificate or key store. 7.
DRAFT - 3/24/23 Connect a Bluetooth Device To connect to a Bluetooth device, you must turn On the Bluetooth radio and then select the device from a list of discovered devices. 1. Swipe up from the bottom of the Home screen to access all apps. 2.
2. Tap Scanner Edge 3. Tap the menu icon and then tap Pair BT Scanner. 4. For Honeywell branded scanners tap Honeywell or for Intermec branded scanners tap Intermec. 5. Scan the Connect Barcode displayed on screen. EDA10A Enterprise Tablet User Guide...
For more information, see the EDA10A Accessories User Guide, available on the EDA10A product page at sps.honeywell.com or contact your local sales representative. USB Troubleshooting • If you have a problem with your workstation computer recognizing the USB device, try downloading and installing the Honeywell-aidc-usb-driver. The EDA10A Enterprise Tablet User Guide...
Note: When using a Universal Integrated Circuit (UICC) card for NFC Secure Element NFC link encryption, install the card in SIM slot 1. Developer Information To download the Honeywell Mobility SDK for Android and EZConfig for Mobility: 1. Go to the Honeywell Technical Support Downloads Portal at honeywell.com/PSStechnicalsupport.
Configuration barcodes do not scan and process. • \honeywell\autoinstall folders are inaccessible. Note: To learn more about network and security for Honeywell mobile computers with Android operating systems, go to sps.honeywell.com. Enable or Disable Provisioning Mode 1. Swipe up from the bottom of the Home screen to access all apps.
About Software Updates and Cyber Security Cyber security best practices include keeping your device apps and OS up to date. To help, Honeywell offers maintenance patches, security updates and operating system upgrades through our Honeywell Edge services. Availability and cost depend on the following: •...
DRAFT - 3/24/23 3. Install the Honeywell Download Manager tool on your workstation (e.g., laptop or desktop computer) prior to trying to down. See “Note” on the portal page. This tool is required for downloads. 4. Locate the app or upgrade you want to download in the Software directory tree.
9. Once installation is complete, turn Provisioning mode Off. About the Honeywell Upgrader Use the Honeywell Upgrader app (HUpgrader) to check for and install OTA updates or view the current OTA version installed on the computer. View the Installed OTA Version 1.
1. Swipe up from the bottom of the Home screen to access all apps. 2. Tap Settings > Honeywell Settings > Provisioning mode. 3. Tap the toggle button to turn Provisioning mode On. 4. Save the OTA file (*.zip) in the following folder on the EDA10A computer: •...
Page 89
DRAFT - 3/24/23 8. Tap the OTA update file. The computer examines the file, and then starts the installation. 9. Once the installation is complete (100%), select OK when prompted to Reboot the computer. The computer reboots and finishes the update. EDA10A Enterprise Tablet User Guide...
DRAFT - 3/24/23 Restart (Reboot) the Computer You may need to reboot the computer to correct conditions where an application stops responding to the system. 1. Save your files and close any open applications. 2. Press and hold the Power button until the options screen appears. 3.
DRAFT - 3/24/23 Enterprise Data Reset the Computer 1. Swipe up from the bottom of the Home screen to access all apps. 2. Select Settings > System > Advanced > Reset options. 3. Tap Enterprise data reset. 4. Tap Erase all data. 5.
DRAFT - 3/24/23 Erase All Data (Factory Reset) 1. Swipe up from the bottom of the Home screen to access all apps. 2. Select Settings > System > Reset options. 3. Tap Erase all data (factory reset). 4. Tap Erase all data. 5.
Laser safety labeling is located on the back of the tablet. Physical and Environmental Specifications 1. Go to sps.honeywell.com. 2. Type EDA10A in the Search box and then press Enter. 3. Click EDA10A Enterprise Tablet in the search results to access the product page, from which you can: •...
DRAFT - 3/24/23 Barcode Symbologies Supported The computer supports the following barcode symbologies: 1D Symbologies 2D Symbologies Postal Codes Default Default Default Codabar Enabled Aztec Code Enabled China Post Disabled Code 39 Enabled Codablock A Disabled Korean Post Disabled Code 11 Disabled Codablock F Disabled...
Page 95
DRAFT - 3/24/23 Guaranteed Specs Focus Standard Range Symbology Near Distance Far Distance 5 mils Code 39 3.11 10.63 10 mils Code 39 1.57 16.73 20 mils Code 39 1.73 26.53 13 mils 100% UPC-A 1.73 19.41 15 mils Code 128 1.65 22.52 10 mils Data Matrix...
DRAFT - 3/24/23 S0703 Imager Field of View/Resolution Focus Standard Range (SR) Horizontal Field Angle (degrees) 44 ± 2° Vertical Field Angle (degrees) 28 ± 2° DPI can be calculated based on the following formula: Horizontal DPI = 1280 pixels/width of horizontal field of view (inches) Vertical DPI = 800 pixels/width of vertical field of view (inches) EDA10A Enterprise Tablet User Guide...