Canon imageRUNNER ADVANCE C5560 Series Troubleshooting Manual page 24

5) Attach the washer (XD1-1106-235) [3] between the E-ring [1] and the bushing [2] of the lower delivery roller

However, if the lower delivery roller is a new type, attaching the washer (XD1-1106-235) [3] is not required.

6) While attaching the bushing on the rear side of the lower delivery roller, attach the supporting plate [1] which was removed in

the step 3).

- Screw [2] 1 pcs

7) Loosen the 2 screws [1], rotate the gear [2] in an arrow direction with a hand, pull out the front/rear tray auxiliary guide [3] for

approx. 10 mm, and then tighten the 2 screws [1].

8) Assemble the parts by reversing the step 1).

9) Select the motor to check operation.

Service Mode (Level1) SORTER > FUNCTION > MTR-CHK enter "17" and press "OK".

[Reference] After "17" is entered, the tray auxiliary guide motor (M109) is selected.

10) Service Mode (Level1) SORTER > FUNCTION > MTR-ON press "OK" to drive the tray auxiliary guide motor (M109) and

check the operation of the tray auxiliary guide.

[Service parts]

No.

1

Old

FM1-H272-000

New

FM1-H272-010

2

Old

New

XD2-1100-505

Part Number

ROLLER, DELIVERY,LOWER

ROLLER, DELIVERY,LOWER

RETAINING RING (E-TYPE)

Description

21

Q'ty

Fig.No.

1->0

L20

0->1

L20

0->1