NEC UNIVERGE SV9300 Networking Manual page 119
Hide thumbs
Also See for UNIVERGE SV9300:
- User manual (141 pages) ,
- Programming manual (47 pages) ,
- Migration manual (26 pages)
Table of Contents
Multiline Terminal
To set a Call Forwarding-No Answer-CCIS from a Multiline Terminal:
1. Lift the handset or press the Speaker key and receive dial tone.
2. Press the Call Forwarding-No Answer feature key and receive Feature Dial Tone.
3. Dial the outgoing trunk access code and receive a single burst of Service Set Tone.
(This operation is required for a network using Open Numbering Plan.)
4. Dial the desired target station number and receive Service Set Tone.
5. Wait approximately five seconds and receive Service Set Tone. The LED lights. The LCD shows:
6. Replace the handset or press the Speaker key.
To cancel a Call Forwarding-No Answer-CCIS from a Multiline Terminal:
1. Lift the handset or press the Speaker key and receive dial tone.
2. Press the Call Forwarding-No Answer feature key. The LCD shows:
3. Dial "
" and receive Service Set Tone. The LED of the associated feature key will go out. The
LCD shows:
4. Replace the handset or press the Speaker key.
CALL FORWARDING-NO ANSWER-CCIS / MULTIPLE CALL FORWARDING-NO ANSWER-CCIS
SET
(TIME DISPLAY)
Forwarding station number
is displayed.
CF NANS
(TIME DISPLAY)
(TIME DISPLAY)
XXXX
YYY
CANCEL
1-105
Chapter 1 CCIS FEATURES
NWA-088654-001 Rev.1.0
94ch1003.fm
- Quick Links:
- Pbx System Designation
- List of Commands
Hide quick links:
Table of Contents
