YOKOGAWA ScopeCorder DL850E User Manual page 67
Hide thumbs
Also See for ScopeCorder DL850E:
- User manual (228 pages) ,
- User manual (195 pages) ,
- Workbook (43 pages)
Table of Contents
2 Vertical Axis
Trace Settings (Trace Setup)
Display Groups (Select Display Gr.)
Sub Channels 1 to 60 (Sub Channel 1 to 60)
Configure the display label, zoom magnification, scaling method, and display range settings of the specified sub
channel.
Labels (Label)
Zooming by Setting a Magnification (V Zoom)
Configure this setting when Value Type is set to Logic.
Selectable range: x0.1 to x3.33
Scaling (Scale)
Configure this setting when Value Type is not set to Logic.
Auto: The upper and lower display range limits are set automatically.
Default: To the greatest extent possible within the settable range, the maximum and minimum values are used to
set the display range setting (which is explained below) of the specified sub channel.
Display Range (Upper/Lower)
Set the upper and lower limits of the waveform display range.
Selectable range: −30.000E+30 to +30.000E+30
Configuring the Scales of All Sub Channels (All SubChannel Scale)
Configure the scales of all sub channels.
All SubChannel Auto: The upper and lower display range limits are set automatically.
All SubChannel Default: To the greatest extent possible within the settable range, the maximum and minimum
LIN Frame Format
Synch
Break
Field
Field
2-50
values are used to set the upper and lower limits of all sub channels.
LIN Frame
Header
Identifier
Data
Field
Field
8N (1 ≤ N ≤ 8)
Response
Recessive
Checksum
Dominant
IM DL850E-01EN
- Quick Links:
- Vertical Axis
- Trigger
Hide quick links:
Table of Contents
