Editing Module Id; Naming Modules; Changing Module Options; 2: Adding A Module - Honeywell Farenhyt Series Installation And Operation Manual
Addressable fire alarm control system emergency communication system
Hide thumbs
Also See for Farenhyt Series:
- Manual (176 pages) ,
- Installation and maintenance instructions (4 pages) ,
- Installation instruction (2 pages)
Table of Contents
Editing Module ID
6.
Press the up or down arrow key to modify the module ID.
NOTE: Internal devices, SK-NIC and ECS-NVCM are not able to have their module ID edited
Naming Modules
You can assign an English name to a system hardware module to make it easier to recognize on a display.
7.
If you wish to edit the modules name press the up or down arrow to select each character for the modules name (or press the right
arrow to bypass name edit).
NOTE: See "Editing Text Using the Built-In Programmer" on page 195 for editing names
.
Default name for the Internal
SLC module
(no customization)
Use up or down arrow key to select
Mode. Press the number until
the character wanted is
shown. Press left/rt arrow
Changing Module Options
Each module has a unique set of options that specifically applies to the functionality of the module being edited.
8.
Use the left and right arrow keys to move between available options.
9.
Option settings are edited by pressing the up or down arrow key or using the keypad for numerical entry.
9.2.2 Adding a Module
If you need to add a new hardware module to the system, follow these steps.
You must be in the Main Menu to perform this task. If necessary, enter the Installer Code.
1.
Select 7 for Program Menu.
2.
Press 1 to enter module menu.
3.
Press 2 to add a module.
4.
From the next screen, use the up or down arrow to choose a module type to add from the screen.
The screen will display "Adding module [#]..." for a few moments. You will be returned to the screen where
you can add additional modules if desired.
You must save changes when you exit the Program Menu or the new module will not be added.
NOTE: If you Add a Module that has not been physically connected, the panel will go into trouble after it reinitializes (when you exit the
Program Menu). When the new module is attached, the trouble will correct itself automatically
9.2.3 Deleting a Module
If you ever need to delete a module, follow these steps.
You must be in the Main Menu to perform this task. If necessary, enter the Installer Code.
1.
Select 7 for Program Menu.
2.
Press 1 to enter module menu.
3.
Press 3 to delete a module.
4.
Select a module to delete.
5.
A warning screen will display. If you want to proceed with deleting the module, select Yes. To cancel, select No.
9.2.4 View Module List
1.
Enter the installer code.
2.
Select 7 for Program Menu.
3.
Press 1 to enter module menu.
4.
Press 4 to view module list.
IFP-300 / IFP-300ECS Manual P/N LS10145-001SK-E:B 12/18/2017
Figure 9.1 Edit module Name Programming Screen Example
110
Table of Contents
Troubleshooting
