Table of Contents
THEFT PROTECTION
The control panel latch mechanism
opens.
➮
First, pull the control panel straight
off the device and then out to-
wards the left.
The device switches off after the
●
control panel is detached.
All the current settings are saved.
●
Any CD already inserted in the de-
●
vice remains there.
Attaching the control panel
➮
Slide the control panel from left to
right into the device's guide.
➮
Press the left edge of the control
panel into the device until it clicks
into place.
Note:
When attaching the control panel,
●
make sure you do not press the
display.
50
SWITCHING ON/OFF
Switching on/off
There are various ways of switching
the device on/off.
Switching on/off using button
1
➮
To switch on the device, press
button 1.
The device switches on.
➮
To switch off the device, press and
hold down button 1 for longer
than two seconds.
The device switches off.
Switching on/off using the
vehicle ignition
The device will switch on and off si-
multaneously with the ignition if it is
connected correctly to the vehicle's ig-
nition and if it was not previously
switched off using button 1.
You can switch the device on even if
the ignition is off.
➮
Press button 1.
Note:
To protect the vehicle battery, the
●
device will switch off automatically
after one hour if the ignition is off.
- Quick Links:
- Table of Contents
- Installation
- Pre-Amp out
Hide quick links:
Table of Contents
