Page 4
CONTROLS ter or a particular point in time Button to switch the device on/ within the chapter. off. PAUSE/STEP button to pause REP for activating/deactivating playback (freeze frame). the REPEAT function. SCAN has no function on the ME2. FAST button to activate/deacti- vate fast forwarding.
CONTENTS Closing the DVD menu ....44 Notes ........32 Displaying the title menu ....44 Road safety ........32 Safety notice ......... 32 External sources ....44 Installation and connection ..33 CD and MP3 mode ....45 Installation kit ......... 33 Equalizer ........
NOTES Notes Road safety Thank you for choosing a Blaupunkt Road safety has absolute prior- product. We hope you enjoy using this ity. Only operate this device if the new piece of equipment. road and traffic conditions allow you to do so. Familiarise yourself with the...
INSTALLATION AND CONNECTION You must take the following into account Installation and connection when selecting the installation location: Installation kit - The vehicle tank must not be dam- The supplied installation kit contains aged by screws. three brackets, screws, an electrical - There must be no wires or pipes supply cable with 16-pin Molex plug and running beneath the surface on...
INSTALLATION AND CONNECTION Connections Connect the free ends of the supplied connection cable to your vehicle’s pow- Connection socket er supply. (16 pin) Yellow: Continuous positive power Remote Sensor source 12V Black: Earth Red: Ignition The continuous positive power cable between the battery and the ME2 must additionally be protected directly at the battery with a fuse holder (5 amperes).
GETTING READY FOR USE SWITCHING ON/OFF Switching on/off Using for the first time The device is ready for operation when If you are using the ME2 for the first the blue button 1 on the device is illumi- time, you must insert the batteries into nated.
Cancelling mute also be played. Due to the varying qual- Press the MUTE button E again. ity of CDs, Blaupunkt cannot guaran- tee that they will work properly. To ensure the system functions proper- ly, only use CDs labelled with the com- pact disc logo.
DVD MODE Inserting/removing a DVD/CD Risk of severe damage to the DVD drive! The ME2 has a slot-in drive without a Contoured DVDs/CDs (shape CDs) tray. It is only possible to achieve good and DVDs/CDs with a diameter of 8 damping of the vibrations of the drive in cm must not be used.
DVD MODE On-screen display Fast-forwarding You can display various details regard- You can fast forward DVDs at double ing the playing time on the screen that speed, quadruple speed, 8-speed, 16- is connected to the device. You can hide speed, 32-speed and 64-speed (de- the on-screen display.
DVD MODE Once the speed has reached the one Resuming playback eighth setting, any subsequent press of To resume playback, the button will cause the film to be press the ENTER/PLAY button B played backwards in slow motion. The on the remote control or the but- screen displays the speed and SR for ton L on the device.
DVD MODE To repeat the current title, Selecting the playing time press the REP button 2 on the You can directly select a particular po- sition on the DVD by entering the play- remote control a second time. ing time that corresponds with this po- “TITLE REPEAT ON”...
DVD MODE Note: Displaying subtitles You can also use the DVD menu to To display subtitles, change the playback language (see press the SUBTITLE button 7 on DVD menu). Additionally, you can set the remote control. your preferred playback language in the setup menu.
DVD MODE DVD MENU Magnifying a screen section DVD menu (zoom) The DVD menu is provided by the DVD that you inserted in the player. After you You can zoom into a freely selectable insert a DVD and playback begins, the section of the film that is currently being DVD menu appears on-screen automat- played with up to 3 times the magnifi-...
DVD MENU EXTERNAL SOURCES Selecting menu entries External sources DVDs generally provide menus in which You can connect two external sources you can select various options such as to this device. “Start film”, “Select chapter”, etc. You can connect an external audio/vid- To switch between the individual menu eo source to the set of cables (AUDIO/ items,...
CD/MP3 MODE EQUALIZER Equalizer CD and MP3 mode In addition to DVDs and video CDs, you The ME2 is equipped with a built-in 7- band equalizer that you can use to opti- can also play audio CDs and MP3-CDs. mise the music reproduction to suit your If you insert and play an audio CD, you vehicle or the style of music.
EQUALIZER Note: Adjusting the user-defined When you make your adjustments to the equalizer settings, the sound reproduction chang- You can adjust the equalizer to suit your es to reflect these changes. requirements by boosting or reducing A few seconds after you adjust the final the output of the available frequencies.
Page 21
EQUALIZER Help adjusting the equalizer Start by adjusting the mid and treble levels and finish by setting the bass levels. Sound Impression / problem Measures Bass sound is too weak Boost the bass with Frequency: 60 to 150 Hz Gain: +4 to +6 Dirty bass Reduce the lower mid level with Booming sound...
SETUP – BASIC SETTINGS Setup Confirm your choice by pressing the ENTER/PLAY button B. The setup menu on the ME2 provides you with many options for customising Close the setup menu by pressing the SETUP button D. the device to suit your needs. The settings are saved and the setup Opening the setup menu menu closes.
SETUP – BASIC SETTINGS Normal/PS: The DVD player is 5: No evaluation of the DVD content is connected to a 4:3 monitor. The wi- available. descreen picture is displayed using 6 PG-R: Forbidden for children and the full height of the screen. The youths, content includes depiction of left and right edges of the wide- violence, obscene language, etc.
SETUP – BASIC SETTINGS Use the 0-9 buttons ? on the re- Note: If you have not set a password yet, mote control to enter the password. the default password is: 0000. Note: Enter the new password twice us- If you have not set a password yet, ing the numerical keypad 0-9 ?.
SETUP – BASIC SETTINGS Displaying the camera angle “Dual mono” setting You can set the system to display a “ ” For DVDs with 1+1 audio mode (two camera symbol whenever there is more mono channels), you can set how you than one camera angle available on the want the two channels to be outputted.
SETUP – BASIC SETTINGS Setting the dynamic range Pro Logic setting control (DRC) If you are watching/listening to a DVD containing an audio track in Dolby Sur- You can use DRC to set the dynamics round Pro Logic, you can activate Pro of a Dolby programme in steps from Logic in order to obtain a surround- “OFF”...
SETUP – BASIC SETTINGS SPECIFICATIONS Activating the screensaver Specifications The ME2 is equipped with a screensav- Operating voltage: 10.8 V to 23 V er that prevents pictures (e.g. menus) Current consumption: from “burning into” liquid crystal dis- In operation: less than 2.0 A plays.
Page 28
(D) Sicherheitshinweise, (GB) Safety Notes, (F) Recommandations de sécurité, (I) Avvertenze di sicurezza, (NL) Veiligheidsinstructies, (S) Säkerhetsanvisning, (E) Indicaciones de seguridad, (P) Instruções de segurança, (DK) Sikkerhedshenvisninger Sicherung (Fuse) 5A gelb/yellow 1 2 V Batterie rot/red ACC+B I =<2A, 0,8A typ. 80mm schwarz/black Ground...
Page 29
Optional Sicherung (Fuse) 5A gelb/yellow Batterie 1 2 V +12V Relais rot/red ACC +B schwarz/black Ground Achtung: Dieser Anschluss sollte von einer autorisierten Kundendienststelle durchgeführt werden. Important: This connection should be made by an authorised customer service centre. Attention: Il est recommandé de faire effectuer cette connexion par un point de service après-vente homologué.