Switching The Confi Rmation Beep On/Off (Beep); Muting During Telephone Mode; Telephone Audio/Navigation Audio - Blaupunkt BRISBANE SD48 7 648 000 310 Operating And Installation Instructions

Car radio sd usb mp3 wma
Table of Contents
Adjusting the volume
When you have fi nished making your chang-
es,
press the MENU button >.
u
To exit the menu,
press the ESC button <.
u
Switching the confi rmation beep
on/off (BEEP)
The system will output a confi rmation beep
for some functions if you keep a button
pressed down for longer than two seconds,
for instance, when assigning a radio station
to a station preset button. You can switch
the beep on or off.
Press the MENU button >.
u
The display shows "MENU".
u
Press the
or
until "BEEP ON" or "BEEP OFF" appears
on the display.
u
button 2 to call up the
Press the
submenu.
u
Switch the beep on or off using the
button 2. "OFF" means beep off,
"ON" means beep on.
When you have fi nished making your chang-
es,
u
press the MENU button >.
To exit the menu,
u
press the ESC button <.
50
button 2 repeatedly

Muting during telephone mode

If your car sound system is connected with
a cell phone or navigation system, the car
sound system is muted when a call is incom-
ing or during a voice output of the naviga-
tion. The call or the voice output is played
back via the loudspeakers of the card sound
system. In order for this feature to work, the
mobile telephone or navigation system must
be connected to the car sound system as
described in the installation instructions.
You can fi nd out from your Blaupunkt dealer
which navigation systems can be used with
your car sound system.
If a call is incoming or a navigation an-
nouncement takes place, the display shows
"TELEPHONE".
Telephone Audio/Navigation
Audio
During a telephone call or a voice output of
the navigation, no traffi c announcements
are switched through.
You can set the volume level at which the
telephone calls or navigation announce-
ments are mixed in.
u
Press the MENU button >.
The display shows "MENU".
u
Press the
or
until "TEL VOL" appears on the display.
u
button 2 to call up the
Press the
submenu.
"TELVOL" and the currently set value are
displayed.
u
Set the desired volume with the
button 2.
button 2 repeatedly
or
Table of Contents
loading

This manual is also suitable for:

Brisbane sd48Victoria sd487 648 000 3107 648 001 310

Table of Contents